ICOM orporated 356200 VS-3 User Manual VS 3 ENG IM1 0 2nd EN review
ICOM Incorporated VS-3 VS 3 ENG IM1 0 2nd EN review
(Short term Confidential)Users Manual_VS-3
INSTRUCTIONS q Bluetooth HEADSET ÂŽ VS-3 Name and the Passkey Thank you for purchasing the VS-3 BluetoothÂŽ HEADSET. This headset is compatible with Bluetooth ÂŽ operation, and includes a [PTT] switch. Please read these instructions carefully and completely before using. Panel description s %ARPHONE 30 %ARPAD s 53" CABLE FOR CHARGING /0# s )NSTRUCTION SHEETS q THIS SHEET AND w -ICROPHONE R DANGER! NEVER operate the headset while driving a vehicle, except for a hands-free operation. Safe driving requires your full attentionâanything less may result in an accident. The VS-3 BluetoothÂŽ HEADSET enables you to hands-free operation with a Bluetooth ÂŽ unit installed transceiver or an AndroidÂŽ DEVICE THIRD PARTY Bluetooth ÂŽ CONNECTION IMAGE Clip [FWD] [PTT] ;6/,= [PLAY] ;6/,=n [RWD] DEFINITION Personal death, serious injury or an explosion may occur. 0ERSONAL INJURY lRE HAZARD OR ELECTRIC SHOCK MAY OCCUR Equipment damage may occur. Recommended for optimum use. No risk of personal injury, ďŹre or electric shock. Precautions Features %ARPHONE JACK D MM 1 â 8 INCH WORD R DANGER! R WARNING! CAUTION NOTE Supplied accessories s .AME )#/- "4 s 0ASSKEY FOUR ZEROS The name is displayed on the paring list of other Bluetooth ÂŽ devices when a Device Search is made. Explicit definitions UT-133 VS-3 Bluetooth Bluetooth mobile DEVICE THIRD PARTY ÂŽ [PWR] DO NOT place the headset in excessively dusty environ- R DANGER! NEVER put the headset in a microwave CLEAN THIS DEVICE AS THEY WILL DAMAGE THE DEVICES SURFACES If the device becomes dusty or dirty, wipe it clean with a soft, dry cloth. EAS WITH TEMPERATURES BELOW nÂ# nÂ& OR ABOVE Â# Â& %XTREME TEMPERATURES MAY DAMAGE THE HEADSET shorten the internal battery life, cause ďŹuid to leak from the battery, or cause the battery to rupture or catch ďŹre. R WARNING! NEVER use a non speciďŹed USB cable. 4HIS MAY POSE A lRE HAZARD OR RESULT IN AN ELECTRIC SHOCK USB port for charging R WARNING! NEVER make any changes or modiďŹcations to the headset. 4HIS MAY POSE A lRE HAZARD OR RESULT IN an electric shock. Before using the headset Fully charge the headset before using, and when the LED blinks every 3 seconds. How to charge the VS-3 q -AKE SURE THE HEADSET POWER IS /&& s )F ITS /. HOLD DOWN ;072= FOR SECONDS w Open the USB port cover, and then connect the VS-3 to a USB power adapter, or a PC, with the supplied USB cable. s 4HE CHARGING TEMPERATURE RANGE ç TO ç Ć TO Ć s 7HILE CHARGING THE ,%$ LIGHTS RED s 7HEN THE CHARGE IS COMPLETED THE ,%$ TURNS /&& Power adapter THIRD PARTY VS-3 Charging cautions The charging time is approximately 3 hours. If the LED does not turn OFF after 3 hours of charging, disconnect the USB cable to stop charging. Overcharge may degrade the battery performance or shorten battery life. Also, it may cause a ďŹre or explosion. While charging, you cannot use the headset. Connecting the earphone plug R WARNING! NEVER drop, impact or vibrate the headset. For your right ear PC CAUTION: NEVER bend or slew around forcedly, hitch, heat or remodel the USB cables and earphones. This may result in an electric shock or this could cause a ďŹre or damage the headset. cable from the headset. Using the earphones for a long time may cause your ears to ache. We recommend that you sometimes remove it while using. If the headset must be left unused for a long time, it must be kept safely in a cool dry place with the temperature range AS BELOW nÂ# TO Â# nÂ& TO Â& WITHIN A MONTH nÂ# TO Â# nÂ& TO Â& WITHIN THREE MONTHS nÂ# TO Â# nÂ& TO Â& WITHIN A YEAR After not using the headset for a long time, the internal battery may be completely exhausted. In that case, you may not be able to charge it again. Place the headset in a secure place to avoid inadvertent use by children. touch any internal part of the headset. This may result in an electric shock or this could cause a ďŹre or damage the headset. CAUTION: NEVER hitch the cable when detaching the To a USB port PERATURE RANGE Â# TO Â# Â& TO Â& hands to prevent electric shock. equipment. Radio waves the headset may cause the interference. DO NOT charge the headset outside of the speciďŹed tem- R WARNING! NEVER let metal, wire or other objects CAUTION: NEVER use the headset nearby medical For your left ear ments or in direct sunlight. DO NOT USE HARSH SOLVENTS SUCH AS BENZINE OR ALCOHOL TO R WARNING! NEVER touch the headset with wet R WARNING! NEVER keep charging the battery since overcharge may cause overheating or battery may rupture. Earphone plug D MM 1 â 8 INCH CAUTION: Immediately stop the headset operation if it emits an abnormal odor, sound or smoke. Contact your Icom dealer or distributor for advice. R DANGER! NEVER incinerate the headset since the lithium polymer battery gas may cause it to rupture, or may cause an explosion. R DANGER! NEVER use or leave the headset in ar- LED indicator [RESET] ATMOSPHERE 4HIS MAY POSE A lRE HAZARD OR EXPLOSION oven or high-pressure cooker, or put on a electromagnetic cooker. 4HIS MAY POSE A lRE HAZARD OR EXPLOSION BluetoothÂŽ unit installed Transceiver ÂŽ R DANGER! NEVER use the headset in an explosive CAUTION: NEVER use the headset if the USB port or earphone jack is broken. Contact your Icom dealer or distributor for advice. The BluetoothÂŽ communication range may vary, depending on the environment in which the device operates. -ICROWAVE OVENS OR WIRELESS ,!. MAY CAUSE INTERFERENCE In that case, stop using those devices or move away from them. This BluetoothÂŽ device has a range of use. If the communication is unstable, use the device within the range. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom )NCORPORATED *APAN IN *APAN THE 5NITED 3TATES THE 5NITED +INGdom, Germany, France, Spain, Russia and/or other countries. The BluetoothÂŽ work mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom inc. is under license. All other products or brands are registered trademarks or trademarks of their respective holders. SpeciďŹcation s "LUETOOTHÂŽ 6ERSION "LUETOOTHÂŽ 6ERSION s 4RANSMISSION /UTPUT #LASS s 3UPPORTED PROlLES (&0 (30 !$0 !62#0 s 4HE MAXIMUM NUMBER OF PAIRED "LUETOOTHÂŽ DEVICES DEVICES 9OU CAN PAIR WITH UP TO HEADSETS AND DATA DEVICES 4HE PAIRED DEVICES CANnot be all headsets or all data devices. s $IMENSIONS 7 ž( ž$ MM 7 ž( ž$ INCH 0ROJECTIONS ARE NOT INCLUDED s /PERATING TEMPERATURE RANGE nç TO ç (nÂ& TO Â&) s #HARGING TEMPERATURE RANGE ç TO ç ( Â& TO Â&) s 7EIGHT G OZ APPROXIMATELY The speciďŹcations are subject to change without notice or obligations. About the internal battery s 4HE LITHIUM POLYMER BATTERY INSIDE 63 IS A CONSUMABLE battery. The gradual deterioration of the charging ability is not a failure, but a property of a polymer battery. The battery may recover by fully discharging, and then recharging, several times before using the unit again. s 4HE OPERATING TIME COULD BE SHORTER AT LOW TEMPERATURES s 4HE LITHIUM POLYMER BATTERY IS RECYCLABLE Radio operator warnings s $O NOT USE THE HEADSET NEAR MEDICAL EQUIPMENT OR A PERson who has a pacemaker. Radio waves from the headset may cause interference, or endanger their life. s $O NOT USE THE HEADSET NEAR MICROWAVE OVENS )NTERFERENCE may occur. s $O NOT MAKE ANY CHANGES OR MODIlCATIONS TO THE HEADSET Electromagnetic Interference When you use a BluetoothÂŽ device, pay attention to followING BluetoothÂŽ DEVICES OPERATE ON THE '(Z BAND 4HE '(Z BAND IS ALSO USED BY OTHER DEVICES SUCH AS Wireless LAN products, microwave ovens, RFID systems, amateur radio stations, and so on. When using the headset and turned ON near such devices, interference may occur, causing a decrease in communication speed, and an unstable connection. In such cases, use the headset away from the other devices, or stop using those devices. Note for disconnecting FCC and IC information s &/2 #,!33 " 5.).4%.4)/.!, 2!$)!4/23 This equipment has been tested and found to comply with THE LIMITS FOR A #LASS " DIGITAL DEVICE PURSUANT TO PART OF the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES s 2EORIENT OR RELOCATE THE RECEIVING ANTENNA s )NCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND REceiver. s #ONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERent from that to which the receiver is connected. s #ONSULT THE DEALER OR AN EXPERIENCED RADIO46 TECHNIcian for help. CAUTION: Changes or modiďŹcations to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. 4HIS DEVICE COMPLIES WITH 0ART OF # AND )NDUSTRY #ANADA LICENCE EXEMPT 233 STANDARDS /PERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS THIS DEVICE MAY NOT CAUSE INTERFERENCE AND THIS DEVICE MUST ACCEPT ANY INTERFERENCE including interference that may cause undesired operation of the device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets THE # RADIO FREQUENCY 2& %XPOSURE 'UIDELINES AND 233 OF THE )# RADIO FREQUENCY 2& %XPOSURE RULES 4HIS equipment has very low levels of RF energy that are deemed TO COMPLY WITHOUT TESTING OF SPECIlC ABSORPTION RATIO 3!2 #!. )#%3 " ,E PRÂŁSENT APPAREIL EST CONFORME AUX LA PARTIE DES RĂGLES de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisĂŠe aux DEUX CONDITIONS SUIVANTES LgAPPAREIL NE DOIT PAS PRODUIRE DE BROUILLAGE ET LgUTILISATEUR DE LgAPPAREIL DOIT ACCEPTER tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet ĂŠmetteur ne doit pas ĂŞtre co-localisĂŠ ou fonctionner en conjonction avec une autre antenne ou ĂŠmetteur. #ET ÂŁQUIPEMENT EST CONFORME AUX LIMITES DEXPOSITION AUX rayonnements ĂŠnoncĂŠes pour un environnement non contrĂ´lĂŠ ET RESPECTE LES RĂGLES LES RADIOÂŁLECTRIQUES 2& DE LA # LIGNES DIRECTRICES DgEXPOSITION ET DEXPOSITION AUX FRÂŁQUENCES RADIOÂŁLECTRIQUES 2& #.2 DE L)# #ET ÂŁQUIPEMENT ÂŁMET UNE ÂŁNERGIE 2& TRĂS FAIBLE QUI EST CONSIDÂŁRÂŁE CONFORME SANS ÂŁVALUATION DU DÂŁBIT DABSORPTION SPÂŁCIlQUE $!3 .-" " About CE How to use the VOX function Versions of the VS-3 which display the âCEâ symbol on the serial number label, comply with the essential requirements of the Radio and Telecommunications Terminal Equipment DiRECTIVE %# AND THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT $IRECTIVE EU. 9OU CAN GET THE $/# Declaration Of Conformity FROM YOUR nearest Icom dealer. See the Icom website for details of your nearest dealer. HTTPWWWICOMCOJPWORLD 9OU CAN USE THE 6/8 FUNCTION WITH THE 63 WHEN THE TRANSCEIVERS 6/8 FUNCTION IS ENABLED 3EE THE TRANSCEIVERS INSTRUCTION MANUAL FOR DETAILS Programmable Key You can assign other function to the [PLAY], [FWD] or [RWD] keys using the Bluetooth ÂŽ unit installed transceiver. 3EE THE TRANSCEIVERS INSTRUCTION manual for details. [FWD] [PLAY] [RWD] Troubleshooting The following chart is designed to help you correct problems which are not equipment malfunctions. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact your nearest Icom Dealer or Service Center. PROBLEM Power does not turn ON. POSSIBLE CAUSE s 4HE BATTERY IS EXHAUSTED SOLUTION s #HARGE THE BATTERY s !FTER PUSHING ;2%3%4= PUSH ;072= TO TURN /. Pairing cannot be made. s 4HE HEADSET IS NOT IN THE PAIRING s %NTER THE PAIRING MODE mode. s 4HE "LUETOOTHÂŽ device setting is s #ORRECT THE PAIRING SETTING incorrect. s /THER "LUETOOTHÂŽ devices are s 3TOP OTHER "LUETOOTHÂŽ devices, or move away from working around you. them. s /THER WIRELESS ,!. OR ELECTRIC DE- s 3TOP OTHER WIRELESS ,!. OR ELECTRIC DEVICES OR LEAVE vices may interfere. more space from them. s 0USH ;6/,= TO SET THE VOLUME LEVEL No sound from the earphone s 4HE VOLUME IS LOW s 4HE EARPHONE JACK IS ALMOST DE- s 0ROPERLY CONNECT THE EARPHONE JACK tached. s )NCREASE THE TRANSCEIVERS VOLUME LEVEL s 4HE TRANSCEIVERS VOLUME IS LOW s #OMMUNICATION IS SUDDENLY s 4HE "LUETOOTHÂŽ device is out of s 5SE THE HEADSET WITHIN THE COMMUNICATION RANGE cut off. range. 4HE COMMUNICATION RANGE OF THE HEADSET IS METERS s .OISE IS MIXED FEET BUT IT MAY BE SHORTER DEPENDING ON THE INterference. s /THER WIRELESS ,!. OR ELECTRIC DE- s 3TOP OTHER WIRELESS ,!. OR ELECTRIC DEVICES OR LEAVE more space from them. vices may interfere The power is on but the device s 4HE HEADSET HAS MALFUNCTIONED Push [RESET] to force power OFF the headset. is disabled. s #HANGE THE FREQUENCY The transceiver does not s 4HE TRANSCEIVER IS OUT OF RANGE transmit. s 4HE TRANSCEIVERS "USY ,OCKOUT s 7AIT UNTIL THE OTHER STATION STOPS TRANSMITTING OR CHANGE function is activated, and the trans- the frequency. ceiver is receiving a signal. s 4HE -)# GAIN OR 6/8 GAIN IS INCOR- s !DJUST THE TRANSCEIVERS -)# GAIN OR 6/8 GAIN OR THE rectly set. HEADSETS -)# GAIN When you disconnect the VS-3 from the connected BluetoothÂŽ device by resting or turning OFF the VS-3, the audio OUTPUT SWITCHES FROM THE 63 TO THE DEVICES SPEAKER Be sure to not set the audio volume of the device too high. +AMIMINAMI (IRANO KU /SAKA *APAN ! 7 %8 0RINTED IN *APAN Ă )COM )NC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Instance ID : uuid:a378a92b-0951-4f1f-9e0e-bd98281934d8 Document ID : adobe:docid:indd:9f260dbc-a2b9-11e3-a9c7-9c7ffb13e676 Rendition Class : proof:pdf Derived From Instance ID : 9f260dbb-a2b9-11e3-a9c7-9c7ffb13e676 Derived From Document ID : adobe:docid:indd:93fda567-523e-11e3-a2ef-e66dfba9e284 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:6A8151CED795E3119F1FEB109EDE96BF, uuid:8D29A9484998E31197DFA2E1746E17A5, uuid:8F29A9484998E31197DFA2E1746E17A5, uuid:8E29A9484998E31197DFA2E1746E17A5, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:58ED95171E41DF118D76B07850F1AB20, uuid:56ED95171E41DF118D76B07850F1AB20, uuid:6A8151CED795E3119F1FEB109EDE96BF, uuid:9E0DBBA5645EE011A079BDF63DDAFFEF Manifest Reference Document ID : uuid:E1C80D3DC58FE311A3DEA68DA967526B, uuid:49086A619190E311B8F5F031676F3A45, uuid:2DA80305FB91E311AC2BC34B7F8973EC, uuid:25A80305FB91E311AC2BC34B7F8973EC, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:57ED95171E41DF118D76B07850F1AB20, uuid:55ED95171E41DF118D76B07850F1AB20, uuid:E1C80D3DC58FE311A3DEA68DA967526B, uuid:9D0DBBA5645EE011A079BDF63DDAFFEF Create Date : 2014:03:19 08:54:42+09:00 Modify Date : 2014:03:19 08:54:42+09:00 Metadata Date : 2014:03:19 08:30:02+09:00 Creator Tool : Adobe InDesign CS3_J (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11382 bytes, use -b option to extract) Format : application/pdf Title : VS-3_ENG_IM1_0_2nd_EN_review.pdf Creator : i25771 Producer : Acrobat Distiller 8.3.1 (Windows) Trapped : False Page Count : 2 Author : i25771EXIF Metadata provided by EXIF.tools