ICP HMC024KD User Manual MINI SPLIT Manuals And Guides 1006413L

User Manual: ICP HMC024KD HMC024KD ICP MINI SPLIT - Manuals and Guides View the owners manual for your ICP MINI SPLIT #HMC024KD. Home:Heating & Cooling Parts:Icp Parts:Icp MINI SPLIT Manual

Open the PDF directly: View PDF .
Page Count: 26

Download
Open PDF In Browser	View PDF

ELUXE I

MINISPLIT

UAt
SPLIT TYPE

ROOM

AIR CONDITIONER

• Please read carefully and thoroughly this manual
before operating this unit.
° Contact a qualified service technician for
installation, repair and maintenance of this unit.
. The appliance is not intended for use by young
children or infirm persons without super¢ision.
° Young children should be supervised to ensure
that they do not play with the appliance.

CONTENTS
CAUTION

.......................................................................................................

PRODUCT

COMPONENT

IDENTIFICATION

...............................................

3
4

(1) Feature ...................................................................................................

(2) Indoor

Unit, Outdoor

Unit ......................................................................

(3) Name and Function-Remote

Controller(Heating

model) ........................

(4) Name and Function-Remote

Controller(Cooling

model) ........................

(5) Remote

Controller

AIR CONDITIONER

Preparation

OPERATION

(1) Operation

Mode

(2) Operation

Procedure

(4) Airflow

Direction

(5) Setting

the Present
Setting

(7) Operation
FORCED
CARE

Time

Details

9
15

.................................................................

.....................................................................

17
18

................................................................................

......................................................................

TIPS .......................................................................................

CALLING

Setting .........................................................

.......................................................................................

AND MAINTENANCE

BEFORE

................................................................

.............................................................................

Procedure

OPERATION

....................................................................................

(3) Sleep Mode Auto-Control

(6) Timer

.............................................................

FOR SERVICE

THIS IS NOT MALFUNCTION

............................................................

....................................................................

22
24
25
26

To warm up the system,
power mains must be turned
on at least five(5) hou rs

Do not use the air
conditioner for purposes
other than cooling the room.

Leave the power ON unless
you will not be using this
appliance for an extended
period.

DO not use the air conditioner
for other purposes, such as
drying clothes, preserving
foods, or cultivating
vegetables.

the most appropriate

Do not use heating
apparatuses in the vicinity,

Take care to adjust the
temperature to suit the
conditions. Rooms occupied
by young infants, the elderly,
or invalids should be kept at
an appropriate temperature.

The air conditioner's plastic
parts may melt if exposed to
excessive heat.

_lect

PRODUCT

COMPONENT

IDENTIFICATION

(1) Feature
zASoft Dry Operation Mode
page 12
This mode is designed to dehumidify without
overcooling.

zBAuto O_ration
page 11
In selecting this mode of operation, the
setting temperature, indoor fan speed, and
the desired operation mode are
automatically set by the unit electronic
control on the basis of the room
temperature.
During Auto Operation, pressing the Air-flow
direction control button makes vertical louver
swings up and down automatically. Pressing
the Airflow Direction Controi Button wilt set
the louvers at a fixed position. Pressing the
Airflow Direction Control Button again will
restore the auto-swing.

Wireless Remote Controller puts
all functions at your fingertips.

zc ONIOFF Dual Timer _ing
page 18_19
You can program the room air conditioner to
turn itself on or off at a predeterminated time
to ensure maximum comfort when you return
from being away.

zDSl_p Mode Auto Control
page 15
A touch of the Sleep Mode Button
automatically programs the room air
conditioner to control the indoor fan speed,
and adjusts the setting temperature to create
a more comfortable sleep.

of handling the Remote Controller
• Aim at the signal receptor on the room air
conditioner so as to operate.
• The remote contro_ signal can be received
at a distance of up to about 7m(23_).
• Be sure that there are no obstructions
between the remote controller and the
signal receptor.
Do not drop or throw the remote controlfer.
DOnot place the remote controller in a
location exposed to direct sunlight, or near
the heating unit, or any other heat source.
, Block a strong light over the signal re_ptor
with a curtain or etc. so as to prevent the
abnormal operation.

(2) Indoor Unit, Outdoor Unit
I Indoor Unit ]
Power Supply Cord

Air Intake Vent
(front panel)

Controller

Air Outlet Vent
Horizontal
Direction

Storage

Airflow
Louver

Vertical Airflow Direction Louver
(The air outlet vent opens when the eperation
starts.)

Air Filters
(behind front panel)

Indoor unit controls
and indicators
-- Open the front panel
Pull the panel to
open(te_ and right side
of front panel) and open
the panel upward.

Panel Opening
(]eft and right)

Force Ope_tion
Button
Use for operation when the remote controller cannot be used
(When eperation is stepped by the remote _ntre] without
removing power pMg, the room air conditioner consumes
approximately
2W of electricity_)

--Signal

Receptor
Receives the signats from the remote controller.
(Signal receiving sound:two short beeps or one tong beep.)

--Operation

Indication

Lamps

On/Off

: Lights up during
operation,

the air conditioner

s_¢

Sleep Mode : Lights up during Sleep Mode Auto
operation.

Timer

: Lights up during

Defrost Mode : Lights up during
start operation.
- Heating

timer operation.
Defrost Mode or hot

Model only

OUT
DOOR

Outdoor

_tdoer

Un_ " Lights up during the outdoor

Operation

operatien.-

Cooling

Unit]
(Rear)

Air intake Vents
Piping
Drain Hose
Air Outlet

Vent

unit's

Model only

(3) Name and Function-Remote Controller(Heating

zAOperation

Remote Controller

Model)

display

Displays the operation conditions.

zBStart/Stop
Signal transmitter

Button

- Operation starts when this bu_on is pressed, and
stops when the button is pressed again,

Transmits the signals to the room
air conditioner,

• The fan blows at low speed when start button is
pressed initially, after a while the fan speed will be
reached at the desired speed.

zcOperation

Mode _lection

Button

Used to select the operation mode.
• Cooling Operation Mode.
• Auto Operation Mode.
• Soft Dry Operation Mode.
• Heating Operation Mode(Heat Pump Only).

_DON Timer Button
Used to set the time of starting operation

zEOFF Timer Button
Used to set the time of stopping operation.

_FTime Setting Button
Used to adjust the time.

1@Timer Set Button
1

Used to set the timer when the desired time is
obtained,

zHTimer Cancel Button
13

Used to cancel the timer operation.

z Sleep Mode Auto Button
Used to set Steep Mode Auto Operation.

zJAir Circulation Button
Used to circulate room air without cooling.

iH Room Temperature

Checking

Button

Used to check the room temperature.
zLAirflow Direction Control Button
Used to set the desired vertical airflow direction.

zMR_et Button

(4) Name and Function-Remote Controller(Cooling Model)
zAO_ration

Remote Controller

display

Displays the operation conditions.

zBStart/Stop

Signal transmitter

Button

• Operation starts when this button is pressed, and
stops when the button is pressed again.

Transmits the signals to the room
air conditioner

• The fan blows at low speed when start button is
pressed initially, after a while the fan speed will be
reached at the desired speed.

zcOperation

Mode _lection

Button

Used to select the operation mode.
• Cooling Operation Mode.
, Auto Operation.
° Soft Dry Operation Mode.
zDON

Timer

Button

Used to set the time of starting operation.

zEOFF Timer Button
Used to set the time of stopping operation.
/_iTime Setting Button
Used to adjust the time.

zcTimer
1
13

Set Button

Used to set the timer when the desired time is
obtained.

zHTimer

Cancel Button

Used to cancel the timer operation_

I zSleep Mode Auto Button
Used to set Sleep Mode Auto Operation

J Air Circulation Button
Used to circulate room air without cooling or heating_

_KRoom

Temperature

Checking Button

Used to check the room temperature.
z L Airflow Direction Control Button
Used to set the desired vertical airflow direction.

_M ResetButton

(5) Remote Controller Preparation
How to store the remote controller

Pull the left and the right side to open the
front pane_ upward.

How to mount onto a wall

Use the screws to secure the holder to
the wail,
Confirm that the remote
control signals can reach
the signat receptor of unit

Store the remote control,

(Remove

To attach the remote controller to the
holder

it when using.)

Press
thepanel.
left and the right side to close
the
front

To remove,

How to insert bakeries
Remove the battery cover from the remote
controller,
. Slide the cover according to the arrow
direction,
Insert the two batteries,
. Be sure that the (+) and (-) directions are
correct.
. Be sure that both batteries are new.
Re-attach the cover.
• Slide it back into position.

° Do not use rechargeable
bakeries, such batteries differ
from standard dry cells in
shape, dimensions, and
performance,
. Romove the batteries from the
remote controller if the air
conditioner is not going to be
used for some long time.
. Batteries for the remote
controller are type "AAA".

AiR CONDITIONER

OPERATION

(1) Operation Mode
(Heat Pump Model)
Cooling Mode

(Cooling Model)
Cooling Mode

]

Auto M_e

I
I

Soft Dry Mode

!
Heating Mode

(2) Operation Procedure
[_

S_rb'Stop Button

Operation Mode Selection
Button

[
Heat pumpmodel 8A.1_._
Cooling model

Room
ButtonTemperature Setting

Indoor Fan Sp_d

_11
_

_|ection

Button

8A5

zACooling
(_

Operation Mode

LED lamp ON)

Press the StaWStop Button.

• Two short beeps witl sound and the
operation lamp will light up.

Select Cooling Operation.
Press the Operation Mode Selection Button.
Each time the button is pressed, the operation mode is shifted in the arrow direction.

Auto Operation

Set the temperature
lower than the room
temperature.

Soft Dry Operation

Heating Operation
(Heat pump m_el only)

• The temperature can be set
within a range of 64_*-86°F by
2_.

-To raise the Temperature
.To tower the Temperature

Set the fan speed.
-low, medium, high, AUTO.

the fan
speed
in four
- Select
The display
shows
high
fan steps
speed

• Each time the button is pressed, the fan speed mode is
shifted.

B10m

zB Auto Operation Mode
(_ LED tamp ON)

Press the Start/Stop Button.

• Two short beeps wilt sound and the
operation lamp will light up.

Select Auto Operation.
Press the Operation Mode Selection Button.
Each time the button is pressed, operation mode is shifed in the arrow direction.

Coof[ng

Soft Dry Operation

Opera_ion

He_ing Operation
(Heat _mp rno_l only)

Set the temperature.

, Operation mode, set temperature and fan speed are automatically
set by the electronic controls based on the room temperature.
, If you want to change the set temperature, press room
temperature setting button
, The cooler or warmer you feel, the more times (up to two times)
you press the button.
, Then the set temperature wilt be changed automatically by micom
control.
To raise the Temperature. (When you feel too coot or cold)
To lower the Temperature. (When you feet too warm or hot)

During Auto Operation.
• It is impossible to switch the indoor fan speed during Auto Operation because of being
already set to the best position by the electronic control.
• If the room air conditioner is not operating as desired, switch to cooling mode or other
mode.
• During Auto Operation, pressing the Air-flow direction control button makes vertical louver
swings up and down automatically.
If you want to stop auto-swing, press the Airflow
Direction Control Button again.

--11

zcSoft

Dry Operation Mode

This mode dehumidifies without overcooling.
(C) LED tamp ON)
Press the StaWStop Button.

i"_ _!_i
ii',_i i _'ii_
_o

d and the

operation lamp will light up.

Select Soft Dry Operation.
Press the operation Mode Selection Button.
Each time the button is pressed, the operation mode is shifted in the arrow direction.

Heating Operation
Coo_o_Opera_on
Ao_oO_ra_oo
.........................................................................................
(Heat pump m_et only)

Set the Temperature lower than the room temperature
• The temperature can be set
within a range of 64_~86_ by
2_.

..............................
TO raise the Temperature
To lower the Temperature
During Dry Operation
, The indoor fan speed is automatically set to the low, and cannot be adjusted during Dry
Operatrion by Micom Control
- The indoorfan may stop during this operation if the electronic control determines
over-cooling may occur

--12--

zD Heating Operation Mode (Heat pump model only)
(0 LED lamp ON)

Press the Start/Stop Button

ii; ilii;i i! _i;

dand

the operation lamp will light up.

Select Heating Operation,
Press the Operation Mode Selection BuEon.
Each time the button is pressed, the operation mode is shifted in the arrow direction.

(Heatpumpmodelonly)

Set the temperature.
• The temperature can be set
within a range of 60_~86°F
by

To raise the Temperature
To lower the Temperature

Set the fan speed_
• Select the fan speed in four steps
-tow, medium, high, AUTO.
• The display shows high fan speed.

• Each time the button _spressed, the fan speed mode is
shifted.

B13m

zE Air Circulation Mode
This mode is used to circulate room air without cooling or heating.
(0 LED tamp ON)
Press the StaWStop Button.

. Two short beeps will sound and the
operation lamp will light up.
Press Air Circulation Button.

Each time Indoor Fan Speed Selector is pressed, the fan speed mode is shifted in the
arrow direction.

• Fan speed is low.

• Fan speed is medium.

, Fan speed is high.

, Auto Air: Fan speed is automaticlly changed from
medium to low speed, or viceversa,
depending on the ambient temperature.

B14m

(3) Sleep ModeAuto - Control Setting
(_

LED lamp OI'.,t)

Remote Controller
, The Sleep Mode will be operated at a low fan
speed(Cooling)
or a reed. fan speed(Heating)
for quiet sleeping.

Press the Sleep Mode Auto

1, Press the Sleep Mode Auto Button and set
the time to turn off.
2, Check the Sleep Mode Auto LED of the
room air conditioner lights up.
3. The Timer is programmed by 1 hour each
pressing the sleep mode auto button from
1 hour to 7 hours.

In Cooling mode
• The setting temperature will be automatically
raised by 2_ 30 minutes later and by 4_ 1
hour later for comfortable sleeping°
- In order to cancel the Sleep Mode, press the
button several times until star pictograph on
the operation display disappears,

B15m

(4) Ai_low Direction Procedure
/A Vertical Ai_low Direction Control
Airflow Direction Control
The airflow direction can be adjusted as desired by using the remote controIler_

Press the Start/Stop Button.
(Confirm the unit on operation.)

• Always use the remote controller to adjust the
ai_low direction. Manually moving the vertical
airflow direction louver by hand could cause
operation errors.
• When air conditioner operation is stopped,
the vertical airflow direction louver will close
the air outlet vent of room air conditioner.

Press the Airflow Direction Control
Button and the vertical louvers swing up
and down automatically.

Press again the Airflow Direction Control
Button to set the vertical louver at the
desired airflow direction,

B16m

zB Horizontal Airflow Direction Control
• Adjust the horizontal; airflow direction by manually moving the horizontal airflow direction louver
by hand,

(5) Setting the Present Time
The present time can be set only when pressingthe reset button or when replacing batteries for
the remote controller.

Press the Start/Stop Button after pressing
the RESET Button or changing batteries
for Remote Controller.

Press the Time Setting Button until
being set the desired time,

Press the Time SET Button
S_

NOTE •Check a.m. and p.m. indicator in setting time.

B17m

(6) Timer Setting
( G LED lamp Oh,I)

Remote Controller
Heating

ON
Timer Button or OFF Timer
Button

Cooling

Time Setting Button
_

Timer SET Button
Timer CANCEL Button

Press the ON Timer Button or OFF Timer

To canal

the _ttings

Button.
Press the Timer Cancel button.

The timer setting
will be displayed.

(The timer lamp on the ai:r
conditioner and the display
will go out,)

Change
theButton.
Timer Setting and press the
Timer Set
If the settings are cancelled by a power
failure.

SET

Press the Start/Stop Button, and then set
the timer again as desired time according to
Timer Setting Procedure.

B18m

Timer Setting Procedure
Confirm the present time.(Refer to page 17)

• Select one of the following
operation.

Press ON Timer Button or OFF Timer Button.
ON

OFF

four types of

Operation stops at OFF Timer Setting

Delay
OFF Timer

Operation starts at ON Timer Setting.

Delay
ON Timer

Operation stops at OFF Timer Setting and starts
at ON Timer Setting.

Deiay OFF
and ON Timer

Operation starts at ON Timer Setting and stops at
OFF Timer Setting.

Delay ON
and OFF Timer

NOTE • Check a.m. and p.m indicator in setting
time.
Press the Time Setting Button until being
set the desired time.

Set the Timer SET Bu_on.

SET

B19m

(7) Operation Details
• Soft Dry Operation Mode
When the room temperature is higher than the setting temperature, it operates the cooling mode as the
temperature setting, the fan speed setting(if AUTO mode, then med.), and then it will be switched to
Soft Dry Operation Mode when the room temperature reaches the temperature setting.
In Soft Dry Operation Mode, the indoor fan speed is automatically switched to the low.

\COOLING

ROOM
TEMP.

ROOM
+2 °F
SET

TEMP.

SOFTDRY

TEMP.
-1 °F

INDOOR
FAN

SETINNG
FAN
SPEED

i _LOW COOL
OPERATION

I
I
I
I

OPERATEX

COMP.
OPERATE_

10MINS
/I

STOP
FOR
7 MINS

STOP
START

OPERATEXi

FOR

I
10MINS

OPERATING

FOR

FOR
7 MINS

• Auto Air
For fresh cooling more than other modes.
Press the Indoor Fan Speed Selector and set to Auto Air mode.
The fan blows from medium to low speed, or reversely by the room temperature.
The temperature setting goes up by time automatically.
This mode economizes power consumption and prevents over-cooling (below Fig).
Room Temp.

_'_

1HI1_2R

AUTO AIR MODE OPERATION
m 20 m

FORCED OPERATION
Operation procedures when the remote controller
can't be us_
Open the front panel upward and press the Forced
Operation Button.
If you want to stop operation, press again. During Forced
operation, the operating conditions are automatically set
as foliows:

Cooli:r_j
only fuel
RoomTemp>76_
=IF
70_ < RoomTemp<76_/_T
RoomTemp< 70_
=
=
Operatingmode

Cooling

SoftDry

Heating

IndoorFanSpeed

Huh

High

SoftDryRule

Huh

SettingTemp.

72_

Air IntakeTemperature

76_

Press the Forced Operation Button.

_rced
Operation Button

Open the front
panel upward

• Press the Forced Operation Bu_on
once again to stop operation.

Helpful information
Airflow speed and cooling capacity
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity
wiil be lower at low or medium fan speed.
High fan speed is recommended when you wish to coo] the
room quickly.

--21

CARE AND MAINTENANCE

Cleaning of the air filters.
Recommended about once every two
weeks.

Turn off Main Power.

Remove the Air filters.
Take hold of the tab and pull slightly
forward to remove the filter.

MainPower
Don't wash with water indiscriminately or
improperly as shown, below.
Clean.

,' There's the
i danger of

• To remove the dust adhered to the
filters, either use a vacuum
cleaner, or wash them in water and
dry in the shade.

• Re-insert the filter into the original
position.

Never use any of the followings:
• Water hotter than 104°F.
Could cause deformation and/or
discoloration.
• Volatile substances.

If the Air Filters become damaged.
• Purchase new filters from your air
conditioner dealer.

Could damage the surfaces of the air
conditioner.

Cleaning of the air conditioner and the
remote controller.
• Wipe with a soft, dry cloth./

B 22 m

Operate the air conditioner at the
following settings for 2 to 3 hours.

Remove a protective cover from the
outdoor unit.

oType of operation 'Air circulation
mode (refer to page 14)

This will dry out the internal
mechanisms.
Remove the batteries from the Remote
Controller.

Clean the air filters, re-insert them, and
operate the air conditioner.

Cover the outdoor unit with a protective
cover.

Be sure that nothing obstructs the air
outlet and intake vents
p

Helpful information
The air filters and your electiric biil
If the air filters become clogged with dust, the
COOlingcapacity will drop, and 6% of the
electricity used to operate the air conditioner
will be wasted.

-- 23 --

OPERATION

TiPS

Do not overcool the room.
This will reduce comfort and
may affect your health, it also
wastes electricity.

Keep blinds or curtains
close.

Keep the room
uniform.

Do not let direct sunshine
enter the room when the air
conditioner is in operation.

Adjust the vertical and
horizontal aidlow direction to
ensure a uniform temperature
in the room.

Clean the air filter regularly.

Ventilate the room
occasionally.

~IOOF

Make sure that the doors
and windows are shut tight,
Avoid opening doors and
windows as much as possible
to keep the cool air in the
room.

Blockages in the air filter
reduce the airflow and lower

Since windows are kept

cooling and dehumidifying
effects. Clean at least once
every two weeks,

closed, it is a good idea to
open them and ventilate the
room now and then.

dl <--

B 24 m

BEFORE CALLING

FOR SERVICE

Check the following points before requesting repairs or service .... if the malfunction persist, please
contact your dealer.

Faults

Cau_

Does not operate.

• Has the fuse blown or has the circuit breaker been tripped?
• Have you made a mistake in timer operation?

Does not cool or heat effectively,

• Is the air filter dirty? See air filter cleaning instructions.
• The room may have been very hot when the room air
conditioner was first turned on, Allow time for it to cool down.
• Has the temperature been set incorrectly?
• Are the indoor unit's air inlet or outlet vents obstructed?

The room has a peculiar odor_

• Check that this is not a damp smell exuded by the walls,
carpet, furniture or cloth items in the room.

The air conditioner operation is
noisy.

° For a noise that sounds like water flowing.
-This is the sound of refrigerant flowing inside the air
conditioner unit,
• For a noise that sounds like the compressed air releasing
into atmosphere.
-This is the sound of the dehumidifying water being
processed inside the air conditioning unit.

It seems that condensation is
leaking from the air conditioner

• Condensation occurs when the airflow from the air
conditioner cools the warm room air.

Air conditioner does not operate
for about 3 minutes when
restarted.

• This is a protective of the mechanism.
• Wait about three minutes and operation will begin.

Remote controller display is
faint, or no display at aft.

, Are the batteries depleted?
• Are the batteries inserted in the opposite (+) and (-)
directions?

-- 25 --

This is not malfunction
,,<:\_
You may hear a "Tig" "Tig" sound, when
starting or stopping the air conditioner.
This sound is generated by the expansion/constriction of
the front panel, etc. due to changes of temperature.

B 26 m

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 26
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Mar 28 20:57:20 2014
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

ICP HMC024KD User Manual MINI SPLIT Manuals And Guides 1006413L

Navigation menu

Versions of this User Manual:

Views

Navigation