IDSC NEXIQ Technologies USBL2-IL7 Wireless Vehicle Communication Interface User Manual Exhibit D Users Manual per 2 1033 b3
IDSC Holdings LLC dba NEXIQ Technologies Wireless Vehicle Communication Interface Exhibit D Users Manual per 2 1033 b3
Exhibit D Users Manual per 2 1033 b3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3141402 |
| Application ID | uQTYBi674IVCf/+XHjLeBg== |
| Document Description | Exhibit D Users Manual per 2 1033 b3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 165.13kB (2064098 bits) |
| Date Submitted | 2016-09-21 00:00:00 |
| Date Available | 2016-09-21 00:00:00 |
| Creation Date | 2015-12-16 09:41:14 |
| Producing Software | Acrobat Distiller 10.1.16 (Windows) |
| Document Lastmod | 2016-09-15 12:03:10 |
| Document Title | Cummins INLINEâ„¢ 7 Data Link Adapter Installation and Setup Manual |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | Technical Publications, IDSC Holdings LLC |
Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual. The Cummins INLINE™ 7 was designed and manufactured by IDSC Holdings LLC for Cummins Inc. IDSC Holdings LLC retains all ownership rights to INLINE 7 Data Link Adapter design and its documentation. The INLINE 7 Data Link source code is a confidential trade secret of IDSC Holdings LLC. You may not decipher or de-compile the INLINE 7 Data Link Adapter, develop source code for the INLINE 7 Data Link Adapter, or knowingly allow others to do so. The INLINE 7 Data Link Adapter and its documentation may not be sublicensed or transferred without the prior written consent of IDSC Holdings LLC. This manual, as well as the software it describes, is furnished under license and may only be used or copied in accordance with the terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by IDSC Holdings LLC. IDSC Holdings LLC assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. Except as permitted by such license, no part of this publication may be reproduced, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of IDSC Holdings LLC. The Cummins logo and INLINE 7 are trademarks of Cummins, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG. Other trademarks and trade names are those of their respective owners. ©2015 IDSC Holdings LLC. All rights reserved. All other marks are trademarks or registered trademarks of the respective holders. Pictures for illustration purposes only. Specifications are subject to change without notice. The transmitter modules contained in this product comply with regulatory standards EN 300 328 and EN 301 489-1/ -17. Human exposure of these modules is below the SAR limits specified in EU recommendation 1995/519/EC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. A distance of 20cm minimum should be maintained between the product and all persons during operation. This device contains FCC-IDs : 2AJFJ-USBL2-IL7, QOQWT41. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Part No. 965062 Revised 09/15/2016 Chapter 1: Using this Manual ..................................................1 Manual Overview ...........................................................................2 Conventions ...................................................................................3 Chapter 2: Introducing the Cummins INLINE™ 7 Data Link Adapter .................................................5 Component Checklist ....................................................................6 Product Specifications ...................................................................7 System Requirements ...................................................................8 Device Features ............................................................................9 Communication Options: Wired vs Wireless ...............................13 Wired USB Connection ....................................................................... 13 Wireless Bluetooth Connection .......................................................... 14 Wireless Wi-Fi Connection ................................................................. 15 Mini Access Point Mode (Peer-to-Peer) .......................................... 16 Infrastructure Mode (Connecting to your Company’s Network) ...... 17 Chapter 3: Installing the Drivers and Setting Up the Device ..... 19 Installation Process Outline .........................................................20 Step 1: Install the Drivers ............................................................21 Step 2: Connect the INLINE™ 7 to a Vehicle ..............................30 Making a Wired USB Connection ....................................................... 31 Making a Wireless Bluetooth Connection ........................................... 32 Connecting via a Class 1, External Bluetooth Adapter ................... 32 Pair the Device ................................................................................ 34 Making a Wireless Wi-Fi Connection .................................................. 39 Mini Access Point Mode .................................................................. 39 Infrastructure Mode ......................................................................... 43 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual iii Step 3: Test the Connection ........................................................44 Using the Cummins INLINE™ 7 Explorer Utility ..........................48 The Configuration Tab ........................................................................ 50 Switching Modes: Mini Access Point and Infrastructure ................. 51 The File Menu .................................................................................... 52 The Tools Menu ................................................................................. 53 Ping ................................................................................................. 53 Options ............................................................................................ 54 Start INLINE7 Explorer when Windows Starts ................................... 54 Show New INLINE7 Notification ........................................................ 55 The Help Menu ................................................................................... 56 iv Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 1 Using this Manual Manual Overview, page 2 Conventions, page 3 his chapter provides an overview of this manual’s organization and the conventions used throughout. NOTE: i Screen shots used throughout this manual are for illustrative purposes only. All data shown is fictitious in nature. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Chapter 1 • Using this Manual Manual Overview This manual provides basic and detailed information to support you during installation and setup of the Cummins INLINE™ 7 Data Link Adapter. This manual is composed of the following sections: • Table of Contents—helps you to find the information you are looking for quickly and easily. • Chapter 1: Using this Manual—provides an overview of this user’s manual. • Chapter 2: Introducing the Cummins INLINE™ 7 Data Link Adapter— provides details regarding the communication modes available to you to interface with your PC. It also introduces the features of the INLINE™ 7 (i.e., the LEDs, the Reset Button, the USB port, and the Vehicle port). • Chapter 3: Installing the Drivers and Setting Up the Device—provides instructions for installing NEXIQ™ drivers and utilities, connecting the INLINE™ 7 Data Link Adapter to a vehicle, connecting to a wireless network, and testing the connection. It also provides information on using the Cummins INLINE™ 7 Explorer utility. Each chapter begins with an “at-a-glance” list of the chapter contents, along with corresponding page numbers. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Conventions Conventions This section provides descriptions of the conventions used throughout this guide. Special Messages Note NOTE provides an explanation, comment, or tip related to the subject matter that is being discussed. Example: NOTE: i Refer to the page number provided for each described component for further details. Important IMPORTANT indicates a situation which, if not avoided, may result in damage to the test equipment or vehicle. Example: IMPORTANT: ä Keep all cables clear of moving or hot engine parts. Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in moderate or minor injury to the operator or to bystanders. Example: CAUTION: ä Do not use the unit to perform tests on household or industrial sources. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Chapter 1 • Using this Manual Warning WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or bystanders. Example: WARNING: ä All RP1210 adapters must be disconnected before proceeding with installation. Troubleshooting Information intended to help you to address or anticipate potential issues are presented in the following manner: Check to make certain that the Power LED on the INLINE™ 7 is illuminated. Specialized Text The following specially formatted text is used to help you to differentiate certain elements discussed within this manual: • Emphasis: Used to draw your attention to particularly important information. • FEATURE: Used to highlight the name of a specific feature. Example: “Click on the Finish button to continue.” • Field/Line: Used to highlight the name of a field or a line of text from a display. Example: “Place a check mark in the Always trust software from IDSC Holdings LLC check box.” • Menu Items: Used to highlight a series of menu selections. Example: “From the Start menu, select Programs Cummins INLINE 7 CumminsValidationTool” • Screen titles: Used to highlight the title of a screen displayed. Example: “The Installation Complete screen is displayed.” Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 2 Introducing the Cummins INLINE™ 7 Data Link Adapter Component Checklist, page 6 Product Specifications, page 7 System Requirements, page 8 Device Features, page 9 Communication Options: Wired vs Wireless, page 13 Wired USB Connection, page 13 Wireless Bluetooth Connection, page 14 Wireless Wi-Fi Connection, page 15 Mini Access Point Mode (Peer-to-Peer), page 16 Infrastructure Mode (Connecting to your Company’s Network), page 17 he INLINE™ 7 Data Link Adapter is a hardware device that enables service bay personal computers (i.e., PCs and/or laptops) to retrieve vehicle information using either wireless Bluetooth® technology, a more traditional cable connection, or Wi-Fi. Once configured, the INLINE™ 7 interfaces with your PC, enabling you to use specific PC applications to perform vehicle diagnostics. This chapter introduces the Cummins INLINE™ 7 Data Link Adapter and provides details regarding the communication modes available to you to interface with your PC. It also introduces the features of the INLINE™ 7 (i.e., the LEDs, the Reset Button, the USB port, and the Vehicle port). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter Component Checklist The following components are included with your Cummins INLINE™ 7 Data Link Adapter. Be sure you have all of the following items before using the device: INLINE™ 7 Data Link Adapter Automotive A to Mini-B USB Cable (see Figure 2.2) 6- and 9-pin “Y” Deutsch Adapter 2-pin Delphi/3-pin Deutsch Adapter (with battery clips) Carrying Case Cummins INLINE™ 7 Quick Start Guide NOTE: i INLINE™ 7 drivers and a portable document format (PDF) version of this manual are available for download at the Cummins website [insert web address]. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Product Specifications Product Specifications The INLINE™ 7 Data Link Adapter is configured with the following specifications: Feature Data Physical Dimensions 6.75" x 3.75" x 1.06" (171 mm x 95 mm x 27 mm) Weight 8 oz. (0.22 kg) Power Requirements 6 - 32 VDC @ 350 mA maximum Operating Temperature 0 to +70 °C API Driver • TMC RP1210A, RP1210B, and RP1210C compliant • SAE J2534 compliant Vehicle Protocols Supported • J1708/J1587 • J1939 (250K, 500K, or 1 MB) • CAN (125K, 250K, 500K, 1 MB) (3 CAN channels with Auto Baud) • ISO 9141 • ISO 14230 (KWP2000) • ISO 15765 USB Communication USB Device, version 1.1 USB Connector Latching USB Mini-B Wired Communication Automotive A to Mini-B USB cable 13 ft. (4 m) maximum Wireless Communication Vehicle Connector • Bluetooth® Class 1 adapter (up to 100 m range) • Dual band Wi-Fi (802.11 a/b/g/n) High Density D-sub 26-pin Male (HD26M) Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter System Requirements Be aware of the following system requirements: Component Requirement IBM PC-compatible computer • • • • 1GHz processor or more RAM: 256MB or more (512MB recommended) USB port, version 1.1 or higher Wi-Fi card Operating system • • • Windows® 7 Windows® 8 Windows® 10 Bluetooth® adapter • Bluetooth® Class 1 USB Adapter (up to 100m range) (sold separately) Note: PCs that have Integrated Bluetooth typically use a Class 2 Bluetooth® module, which has limited range (typically 10m). Wi-Fi wireless network • Dual band Wi-Fi (802.11a, b, g, or n) Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Device Features Device Features The following illustration details the features of the INLINE™ 7 device. Reset Button Figure 2.1 Cummins INLINE™ 7 Data Link Adapter Legend A—Vehicle Port D—Wireless Comm LED B—Power LED E—Fault LED C—Vehicle Data LED F—USB Port Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter The following features behave the same whether the device is in Bluetooth® or Wi-Fi mode: Feature What It Does Vehicle Port Connects the INLINE™ 7 to a vehicle/engine for power and data. Power LED Illuminates when the device receives power. Vehicle Data LED Illuminates when the device is receiving data from the vehicle. Fault LED Illuminates when a problem is detected. USB Port Connects the device to your PC (wired connection). Latching USB Mini-B Connector for connection to PC host. Not used with iOS device. The Wireless LED and the Reset Button, however, behave differently depending on which mode (i.e., Bluetooth or Wi-Fi) the device is in. Feature What It Does Wireless Comm LED: Blue: Bluetooth Mode If the device is Discoverable: • Illuminates solid blue when connected. • Blinks every second when not connected. If the device is Non-Discoverable: • Illuminates blue when connected. • Off when not connected. Wireless Comm LED: White: Wi-Fi—Mini Access Point Mode Mini Access Point Mode: • Illuminates solid white when a client PC connects to the device. • Off when no client PC is connected. 10 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Device Features Feature What It Does Wireless Comm LED: Orange: Wi-Fi—Infrastructure Mode Infrastructure Mode: • Stays off when not associated with a network Access Point. • Blinks every second when associated with an access point, but no IP address assigned. • Illuminates solid orange when successfully assigned an IP address. Reset Button Bluetooth Mode The INLINE™ 7 factory default is Bluetooth mode in a Non-Discoverable status. To confirm that the device is in Bluetooth mode, press the Reset button momentarily and the Wireless LED will illuminate blue. In Bluetooth mode, the Reset button is used to change the status of the device. The two status modes are: • Non-Discoverable—When the INLINE™ 7 is Non-Discoverable, it will only connect to a host device with which it has previously been paired. • Discoverable—When the INLINE™ 7 is Discoverable, a host device can detect, pair, or connect to it. To change the mode from Non-Discoverable to Discoverable, press and hold the Reset button until the Wireless LED begins to flash blue (about 3 seconds). Once a connection is established, the LED turns solid blue. After two minutes, discoverability will time out, and the device will go back to Non-Discoverable status. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 11 Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter Feature What It Does Reset Button Wi-Fi Mode When using Wi-Fi, the INLINE™ 7 can be configured for either of the following modes: • Mini-Access Point (Wi-Fi default) • Infrastructure Note: INLINE™ 7 cannot be used in Infrastructure mode until it has been configured using the Explorer utility (see Using the Cummins INLINE™ 7 Explorer in Chapter 3 of this manual). Once Infrastructure mode has been configured, you can switch between Mini-Access Point and Infrastructure modes by pressing and holding the Reset button for three (3) seconds. The LED will change color to indicate the mode change. Reset Button (to switch modes) The Reset button is also used to switch back and forth between Bluetooth and Wi-Fi modes. To switch modes, press and hold the Reset button for about ten (10) seconds. All LEDs will flash momentarily to indicate that the device has been reconfigured and reset. Once the device reboots, the color of the Wireless LED will reflect the wireless mode: • Blue = Bluetooth mode • White = Wi-Fi, Mini Access Point mode • Orange = Wi-Fi, Infrastructure mode 12 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Communication Options: Wired vs Wireless Communication Options: Wired vs Wireless Prior to using the INLINE™ 7, you need to decide how you want the unit to communicate with your PC. There are three options: • Wired, USB Connection (pg. 13) • Wireless, Bluetooth® Connection (pg. 14) • Wireless, Wi-Fi Connection (pg. 15) Wired USB Connection A wired USB connection provides the advantages of high data throughput, low latency, and a high-reliability data connection. IMPORTANT: ä ECU reprogramming typically requires both high throughput and critical timing, and should always use a USB-to-PC wired connection. Wired communication between the INLINE™ 7 and your PC requires an automotive A to Mini-B USB cable (shipped with the INLINE™ 7). Figure 2.2 Automotive A to Mini-B USB Cable NOTE: i For detailed instructions on making a wired connection, refer to Making a Wired USB Connection in Chapter 3 of this manual. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 13 Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter Wireless Bluetooth Connection The INLINE™ 7 can be configured to use Bluetooth® wireless technology to provide communication between the INLINE™ 7 and your PC. Bluetooth® has limited bandwidth and exhibits latency when compared to WI-FI or a wired USB connection. This may result in dropped messages in situations requiring high bandwidth. The INLINE™ 7 Data Link Adapter is equipped with a Class 1 Bluetooth® module with a range of up to 100m when communicating with another Class 1 Bluetooth® device. Most PCs that feature Integrated Bluetooth® are equipped with a Class 2 Bluetooth® module, which limits the useful range to around 10m. NOTE: i For maximum wireless range, the use of an external, Class 1 USB Blue® tooth adapter (sold separately) is recommended. If you decide to employ an external, Class 1 USB Bluetooth® adapter, you will have to perform the following tasks: • Disable the integrated Bluetooth® device • Install the drivers supplied with the external adapter • Configure the Bluetooth® environment. For detailed instructions on configuring the INLINE™ 7 for Bluetooth®, see Making a Bluetooth Wireless Connection, in Chapter 3 of this manual. 14 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Communication Options: Wired vs Wireless Wireless Wi-Fi Connection The INLINE™ 7 can also be configured to use Wi-Fi to provide wireless communication between the INLINE™ 7 and your PC. There are two network options: • Mini Access Point Mode (pg. 16) • Infrastructure Mode (pg. 17) Wi-Fi performance can be affected by network congestion or radio frequency interference if there are too many other wireless devices in the vicinity.These conditions may result in dropped messages. For this reason, Wireless communication is not recommended for ECU reprogramming (i.e, reflashing). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 15 Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter Mini Access Point Mode (Peer-to-Peer) The easiest and quickest way to connect your INLINE™ 7 to your PC is Mini Access Point mode. In Mini Access Point mode (also known as Access Point Emulation mode), the PC communicates directly with the INLINE™. The INLINE™ 7 emulates the function of an access point, allowing the PC to connect directly to the INLINE™ 7, as if it were an access point. When the PC is connected to the INLINE™ 7 in Mini Access Point mode, neither device is connected to the company network. Figure 2.3 Mini Access Mode If you use your PC’s internal wireless network card to connect to your company’s network and the Internet, you may want to obtain an additional wireless network card for use with the INLINE™ 7. Otherwise when you connect the INLINE™ 7 to your PC using Mini Access Point mode, you will not have access to the Internet until you have finished your session and reconnected to your company’s network. 16 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Communication Options: Wired vs Wireless For instructions on connecting the INLINE™ 7 Data Link Adapter and your PC using Mini Access Point Mode, see Connect Using Wi-Fi, in Chapter 3 of this manual. Infrastructure Mode (Connecting to your Company’s Network) In Infrastructure mode, your PC communicates with your company’s computer network through a Wireless Access Point (not included), which acts as a bridge between the wireless network and the wired network. In this mode, the INLINE™ 7 is configured to communicate with the same access point. All communication between the PC and the INLINE™ 7 passes through the access point. Figure 2.4 Infrastructure Mode NOTE: i The settings for connecting to your company network may differ from one installation to another. To ensure network security, your Information Technology (IT) administrator will need to oversee the installation and specify the appropriate configuration parameters. Your IT administrator should be able to properly configure the INLINE™ 7 for infrastructure mode, using the INLINE™ 7 Explorer utility (see Using the Cummins INLINE™ 7 Explorer Utility in Chapter 3 of this manual). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 17 Chapter 2 • Introducing the Cummins INLINE™ 7 Data Link Adapter 18 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 3 Installing the Drivers and Setting Up the Device Installation Process Outline, pg. 20 Step 1: Install the Drivers, pg. 21 Step 2: Connect the INLINE™ 7 to a Vehicle, pg. 30 Making a Wired USB Connection, pg. 31 Making a Wireless Bluetooth Connection, pg. 32 Connecting via a Class 1, External Bluetooth Adapter, pg. 32 Pair the Device, pg. 34 Making a Wireless Wi-Fi Connection, pg. 39 Mini Access Point Mode, pg. 39 Infrastructure Mode, pg. 43 Step 3: Test the Connection, pg. 44 Using the Cummins INLINE™ 7 Explorer Utility, pg. 48 his chapter provides instructions for installing Cummins INLINE™ 7 drivers and utilities, connecting the INLINE™ 7 Data Link Adapter to a vehicle, connecting to a wireless network, and testing the connection. It also provides information on using the Cummins INLINE™ 7 Explorer utility. NOTE: i Screen shots used throughout this manual are for illustrative purposed only. All data shown is fictitious in nature. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 19 Chapter 3 • Installing the Drivers and Setting Up the Device Installation Process Outline Step 1: Install the INLINE™ 7 drivers (pg. 21). Step 2: Connect the INLINE™ 7 Data Link Adapter to the vehicle (pg. 30). Connect to your PC using one of the following options: • A wired, USB connection (pg. 31) • A wireless, Bluetooth® connection (pg. 32) • A wireless, Wi-Fi connection There are two options: — Mini Access Point Mode (pg. 39) — Infrastructure Mode (pg. 43) Step 3: Test the connection between the INLINE™ 7 and the vehicle using the Cummins Communication Validation Tool (pg. 44) NOTE: i If you have questions about using this product, call 1-800-433-9341 20 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 1: Install the Drivers Step 1: Install the Drivers Prior to using the INLINE™ 7, you have to install the necessary INLINE™ 7 drivers. The INLINE™ 7 drivers are compatible with both Microsoft® Windows® 7, Windows® 8 and Windows® 10. IMPORTANT: ä Remember, you must have Administrator security rights and be logged in as “Admin” to successfully complete the installation process outlined in this manual. The following procedure assumes that you have Internet access. To install the drivers on your laptop or PC: 1 On your laptop or PC, navigate to the following website: http://cumminsengines.com/inline-downloads Figure 3.1 Cummins Download Page 2 Select the latest version of the INLINE™ 7 drivers. 3 Click on Open to open the .zip file. 4 Double-click on the .exe file to run the install. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 21 Chapter 3 • Installing the Drivers and Setting Up the Device The Welcome to INLINE™ 7 Setup screen is displayed. Figure 3.2 Welcome to Cummins INLINE 7 Setup Screen 5 Carefully read the information displayed on the screen, and follow the recommendations. 6 Click Next. 22 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 1: Install the Drivers The License Agreement screen is displayed. Figure 3.3 License Agreement Screen 7 Read all the information on this screen, then click I Agree. NOTE: i If you do not agree to the terms, click Cancel. A message is displayed prompting you to confirm quitting INLINE™ 7 Setup. Click Yes to quit. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 23 Chapter 3 • Installing the Drivers and Setting Up the Device The following warning message is displayed. Figure 3.4 Warning Message 8 Carefully read the warning message, and disconnect all RP1210 adapters to which your laptop or PC might be connected prior to proceeding with the installation. NOTE: i You must also exit the WVL2™ Explorer utility if NEXIQ™ WVL2™ drivers have been installed on your laptop or PC. 9 Once you have complied with the requirements of the warning message, click OK. 24 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 1: Install the Drivers The installation begins and the following screen is displayed. Figure 3.5 Installation Screen Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 25 Chapter 3 • Installing the Drivers and Setting Up the Device If you are running Windows® 7 or Windows® 8, the following Windows Security dialog may be displayed. Figure 3.6 Windows Security Dialog NOTE: i You may want to place a check mark in the Always trust software from “Jungo LTD” check box. If you leave it unchecked, this dialog may be displayed more than once. 10 Click Install to continue. 11 Wait briefly while the installation continues. 26 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 1: Install the Drivers The Installation Complete screen is displayed. Figure 3.7 Installation Complete Screen 12 Click Next. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 27 Chapter 3 • Installing the Drivers and Setting Up the Device The following completion screen is displayed. Figure 3.8 Completion Screen 13 Click Finish. 28 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 1: Install the Drivers The Cummins INLINE™ 7 Explorer utility opens. Figure 3.9 Cummins INLINE™ 7 Explorer Utility NOTE: i For information on using the Cummins INLINE 7 Explorer, see Using the Cummins INLINE™ 7 Explorer Utility on page 48 of this manual. 14 Move on to Step 2: Connect the INLINE™ 7 to a Vehicle, next in this manual. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 29 Chapter 3 • Installing the Drivers and Setting Up the Device Step 2: Connect the INLINE™ 7 to a Vehicle Once you have installed the INLINE™ 7 drivers, you are ready to connect the INLINE™ 7 to a vehicle using an adapter cable. Any of the following adapters can provide the interface: • 6-pin Deutsch • 9-pin Deutsch • 9-pin Deutsch (1 meter) • 6- and 9-pin Deutsch Y • 16-pin J1962 for OBD II Next, you connect the INLINE™ 7 to your PC using one of the following options: • A wired, USB connection (pg. 31) • A wireless, Bluetooth® connection (pg. 32) — Connecting via a Class 1, external Bluetooth® adapter (recommended) or — Connecting via Integrated Bluetooth® • A wireless Wi-Fi connection (pg. 39) — Mini Access Point Mode (pg. 39) or — Infrastructure Mode (pg. 43) 30 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle Making a Wired USB Connection To connect the INLINE™ 7 to your PC using a USB cable: 1 Connect the USB cable (i.e., an automotive A to Mini-B USB cable) to the USB port of the PC or laptop. 2 Connect the other end of the cable to the port on the bottom of the device. 3 Connect the DB26 female end of the appropriate adapter cable to the INLINE™ 7. 4 Attach the other end of the adapter cable (i.e., the Deutsch connector end) to the vehicle’s diagnostic connector. NOTE: i The vehicle’s diagnostic connector is typically located under the dashboard on the driver’s side, or beside the driver’s seat. It can also be located in the engine compartment, near the electronic control module (ECM). 5 Move on to Step 3: Test the Connection (pg. 44). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 31 Chapter 3 • Installing the Drivers and Setting Up the Device Making a Wireless Bluetooth Connection NOTE: i The INLINE™ 7 factory default is Bluetooth® mode in a Non-Discoverable ® status. To confirm that the device is in Bluetooth mode, press the Reset button momentarily and the Wireless LED will illuminate blue. The INLINE™ 7 Data Link Adapter is equipped with a Class 1 Bluetooth® module with a range of up to 100m when communicating with another Class 1 Bluetooth® device. Most PCs that feature Integrated Bluetooth® are equipped with a Class 2 Bluetooth® module, which limits the useful range to around 10m. For maximum wireless range, the use of an external, Class 1 USB Bluetooth® adapter (sold separately) is recommended. There are two connection options: • Connecting via a Class 1, external Bluetooth® adapter (recommended) • Connecting via Integrated Bluetooth® The procedure for connecting via Integrated Bluetooth® is much the same as connecting via an external Bluetooth® adapter. To connect using your PC’s Integrated Bluetooth®, jump to Step 5 on page 34 of the following procedure. Connecting via a Class 1, External Bluetooth Adapter If you decide to employ an external, Class 1 USB Bluetooth® adapter, you will have to perform the following tasks: • Disable your PCs Integrated Bluetooth® device • Install the drivers supplied with the external adapter, if required NOTE: i Depending on the Bluetooth® adapter you are using for your wireless con® nection, you may need to install the necessary Bluetooth drivers. For some adapters the drivers will install automatically. • Connect the INLINE™ 7 to a vehicle • Pair the INLINE™ 7 with your PC (pg. 34) 32 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle To connect via an external Bluetooth adapter: 1 Click on the Show Hidden Icons arrow in your PC’s System Tray. The hidden icons are displayed. Figure 3.10 Hidden Icons 2 Right-click on the Bluetooth® icon 3 Click on Turn Adapter Off. 4 Plug the Class 1 Bluetooth® adapter you have selected into an available USB port on your PC, and wait while Windows® installs the required drivers. NOTE: i Depending on the Bluetooth® adapter you are using for your wireless con® nection, you may need to install the necessary Bluetooth drivers. For some adapters the drivers will install automatically. The following message is displayed: Installing device driver software. When the installation is complete, the following message is displayed: Your device is ready to use. NOTE: i Some Bluetooth® adapters may require you to configure a Bluetooth® environment. If this is necessary, an Initial Bluetooth Configuration Wizard screen will display at the conclusion of the adapter installation process. If this happens, use the CD that came with the adapter. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 33 Chapter 3 • Installing the Drivers and Setting Up the Device 5 Connect the DB26 female end of the appropriate adapter cable to the INLINE™ 7. 6 Attach the other end of the adapter cable (i.e., the Deutsch connector end) to the vehicle’s diagnostic connector. NOTE: i The vehicle’s diagnostic connector is typically located under the dashboard on the driver’s side, or beside the driver’s seat. It can also be located in the engine compartment, near the electronic control module (ECM). —At this point, the Power LED (green) on the INLINE™ 7 should be illuminated (on). —If the Power LED is not illuminated, turn the vehicle’s key to the ON position, leaving the engine off 7 Press and hold the Reset Button until the Wireless LED begins to flash blue (about 3 seconds). This will put the INLINE™ 7 in Discoverable Mode. When the INLINE™ 7 is Discoverable, a host device can detect, pair, or connect to it. Once a connection is established, the LED turns solid blue. After two minutes, discoverability will time out, and the device will go back to Non-Discoverable status. NOTE: i See Device Features in Chapter 2 of this manual for a detailed discussion of the Reset Button. 8 Move on to Pair the Device, next in this manual. Pair the Device You use the Windows® utility to pair the device (i.e., the INLINE™ 7 with your PC). To pair the device: 1 Click on the Show Hidden Icons arrow in your PC’s System Tray. 34 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle The hidden icons are displayed. Figure 3.11 Hidden Icons 2 Right-click on the Bluetooth® icon 3 Click Add a Device. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 35 Chapter 3 • Installing the Drivers and Setting Up the Device The Add a device screen is displayed. Figure 3.12 Add a Device Screen 4 Select the device displayed that matches the serial number on the back of your INLINE™ 7 (e.g., CIL7_xxxxxx). 36 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle Your selection is highlighted. Figure 3.13 Add a Device Screen Refreshed 5 Click Next. NOTE: i You may be prompted to enter a pairing code for the device. If you are prompted to enter a PIN or pairing code, enter NEXIQ (all uppercase). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 37 Chapter 3 • Installing the Drivers and Setting Up the Device Figure 3.14 Device Successfully Added Screen The following System Tray message is displayed. Your device is ready to use. 6 Click Close. 7 Move on to Step 3: Test the Connection on page 44 of this manual. 38 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle Making a Wireless Wi-Fi Connection When using Wi-Fi, the INLINE™ 7 can be configured for either of the following modes: • Mini Access Point, the Wi-Fi default (pg. 39) • Infrastructure (pg. 43) NOTE: i INLINE™ 7 cannot be used in Infrastructure mode until it has been configured using the Explorer utility (see Using the Cummins INLINE™ 7 Explorer in Chapter 3 of this manual). Mini Access Point Mode The easiest and quickest way to connect your INLINE™ 7 to your PC is Mini Access Point mode. In Mini Access Point mode (also known as Access Point Emulation mode), the PC communicates directly with the INLINE™ 7. The INLINE™ 7 emulates the function of an access point, allowing the PC to connect directly to the INLINE™ 7, as if it were an access point. When the PC is connected to the INLINE™ 7 in Mini Access Point mode, neither device is connected to the company network. Figure 3.15 Mini Access Mode Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 39 Chapter 3 • Installing the Drivers and Setting Up the Device To connect the INLINE™ 7 to your PC using Mini Access Point Mode: 1 Connect the DB26 female end of the appropriate adapter cable to the connector on the top of the INLINE™ 7. 2 Attach the other end of the adapter cable (i.e., the Deutsch connector end) to the vehicle’s diagnostic connector. NOTE: i The vehicle’s diagnostic connector is typically located under the dashboard on the driver’s side, or beside the driver’s seat. It can also be located in the engine compartment, near the electronic control unit (ECU). —At this point, the Power LED (green) on the INLINE™ 7 should be illuminated (On). —If the Power LED is not illuminated, turn the vehicle’s key to the ON position, leaving the engine Off. 3 Press and hold the Reset Button for about ten (10) seconds to switch from Bluetooth Mode (the factory default) to Mini Access Point Mode. All of the LEDs on the device will flash momentarily to indicate that the device has been reconfigured. Once the connection is complete, the Wireless LED will display white to indicate Wi-Fi Mini Access Point Mode. NOTE: i See Device Features in Chapter 2 of this manual for a detailed discussion of the Reset Button. 4 Navigate to the System Tray on your PC. Figure 3.16 Windows® System Tray 5 Click on the Network icon in the System Tray. 40 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle The Network Selection screen is displayed. Figure 3.17 Network Selection Screen 6 Select CIL7_xxxxxx from the list (where xxxxxx is the serial number of the INLINE™ 7). NOTE: i If CIL7_xxxxxx is not displayed, make sure you are connected to the vehicle. Also, make sure you are within range (i.e., within 100 ft.). You may need to move your PC closer to the vehicle. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 41 Chapter 3 • Installing the Drivers and Setting Up the Device CIL7_xxxxxx is highlighted. Figure 3.18 Selection Highlighted 7 Click Connect. Figure 3.19 8 Enter the Security Key located on the label on the back of the device. The device is now connected and ready to use. 9 Move on to Step 3: Test the Connection, on page 44 of this manual. 42 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 2: Connect the INLINE™ 7 to a Vehicle Infrastructure Mode In Infrastructure mode, your PC communicates with your company’s computer network through a Wireless Access Point (not included), which acts as a bridge between the wireless network and the wired network. In this mode, the INLINE™ 7 is configured to communicate with the same access point. All communication between the PC and the INLINE™ 7 passes through the access point. Figure 3.20 Infrastructure Mode NOTE: i The settings for connecting to your company network may differ from one installation to another. To ensure network security, your Information Technology (IT) administrator will need to oversee the installation and specify the appropriate configuration parameters. Your IT administrator should be able to properly configure the INLINE™ 7 for infrastructure mode, using the Cummins INLINE™ 7 Explorer utility (see Switching Modes: Mini Access Point and Infrastructure on page 51 of this manual). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 43 Chapter 3 • Installing the Drivers and Setting Up the Device Step 3: Test the Connection You use the Cummins Communication Validation Tool to test the connection between the INLINE™ 7 and the vehicle. At startup, the Communication Validation Tool checks for any INLINE™ 7 drivers installed on the PC. To test the connection between the INLINE™ 7 and the vehicle: 1 Click Start and then select All ProgramsCummins INLINE 7 CumminsValidationTool. The application is started and the Communication Validation Tool screen is displayed. Figure 3.21 Communication Validation Tool: Status Not Connected button in the Driver box to select the appropriate driver (i.e., 2 Use the Cummins INLINE 7 Data Link Adapter - CIL7R32). button in the Device box to select the appropriate device (for 3 Use the example, Cummins Data Link Adapter using Bluetooth). —The Device box lists all the devices supported by the INLINE™ 7 drivers installed on the PC. 44 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 3: Test the Connection 4 Use the button in the Protocol box to select the appropriate protocol (e.g., J1939, CAN, ISO 15765, J1708). —The Protocol box lists only the protocols supported by the device selected in the Device box. 5 Press the Start Test button. The Communication Validation Tool screen is refreshed and the Connection Indicator button (located in the bottom left corner of the display) changes from Not Connected (red) to Connected (green). Figure 3.22 Communication Validation Tool: Status Connected The Vehicle Info window displays information about the vehicle to which you are connected (depending on the protocol selected). The Modules Detected window in the middle portion of the screen displays a list of all systems seen on the bus. It is used for J1708 and J1939 only. For all other protocols this window will be unavailable (i.e., NOT USED). The Bus Messages window at the bottom of the screen displays data received from the vehicle bus. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 45 Chapter 3 • Installing the Drivers and Setting Up the Device If the Connection Indicator button is red (i.e., Not Connected), do one of the following: —For a wireless connection: • In the Device list, make sure that the appropriate device is selected, for example: — Cummins Data Link Adapter using Bluetooth or — Cummins Data Link Adapter using WiFi • In the Protocol list, make sure that the appropriate protocol is selected, for example J1939. • Check to ensure that the connections between the INLINE™ 7 and the vehicle are secure (i.e., the Diagnostic Connector). • Check to make certain that the Power LED on the INLINE™ 7 is illuminated. —For a wired connection using a USB cable: • In the Device list, make sure that the appropriate device is selected, for example Cummins Data Link Adapter using USB. • In the Protocol list, make sure the appropriate protocol is selected, for example J1939. • Check to ensure that the connections between the INLINE™ 7 and the PC are secure (i.e., the USB cable). • Check the connections between the INLINE™ 7 and the vehicle (i.e., the Diagnostic Connector). • Check to make certain that the Power LED on the INLINE™ 7 is illuminated. NOTE: i For additional information, refer to “Connect the INLINE™ 7 to a Vehicle” on page 30 of this manual. 6 Click on the Component Info button. 46 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Step 3: Test the Connection The Component Information window is displayed. Figure 3.23 Component Information Window. NOTE: i Component Information for Engines and Brakes is available only during a J1708 connection. 7 When you have finished viewing the information, click the Close button in the upper right corner of the window. 8 Click Stop Test to end the test, or select another device to test. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 47 Chapter 3 • Installing the Drivers and Setting Up the Device Using the Cummins INLINE™ 7 Explorer Utility The Cummins INLINE™ 7 Explorer utility opened automatically when you installed the INLINE™ 7 drivers and utilities (see Figure 3.9, on page 29). To re-open the Cummins INLINE™ 7 Explorer once it has been closed, click on the Show Hidden Icons arrow in your PC’s System Tray. Figure 3.24 Hidden Icons Then, double-click on the INLINE™ 7 icon 7 NOTE: i You can also access the Cummins INLINE™ 2 Explorer from your PC’s Start menu. Click Start and then select All ProgramsCummins INLINE 7 INLINE 7 Explorer. 48 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Using the Cummins INLINE™ 7 Explorer Utility The Cummins INLINE™ 7 Explorer opens. Figure 3.25 Cummins INLINE™ 7 Explorer The following menu options are provided: • File (pg. 52) • Tools (pg. 53) • Help (pg. 56) Each menu option includes a number of features. Each of the menu options are discussed in the following sub-sections. When you click on a INLINE™ 7 in the list in the left pane, the Configuration tab is displayed (Figure 3.26). Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 49 Chapter 3 • Installing the Drivers and Setting Up the Device The Configuration Tab The Configuration tab provides the following information: • Device: — Name — MAC Address • Wireless Settings • Internet Protocol (TCP/IP) Settings This information can be useful when troubleshooting network connection problems. You also use the Configuration tab when switching between the two wireless Connection Types (i.e., Wireless and Bluetooth), or when setting up a WiFi connection in Infrastructure Mode. To access the Configuration tab: 1 Click on a CIL7_xxxxxx in the list in the left pane of the Explorer. Figure 3.26 Configuration Tab 50 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Using the Cummins INLINE™ 7 Explorer Utility Switching Modes: Mini Access Point and Infrastructure The INLINE™ 7 provides several ways to switch modes. From the INLINE 7 Explorer Configuration tab, you can use the Mode drop-down menu under Wireless Settings. Figure 3.27 Wireless Settings: Mode Drop-down Menu Once, you have selected Infrastructure, the Internet Protocol (TCP/IP) portion of the screen is available to you to enter the required settings. There are two options: • Obtain an IP address automatically • Specify an IP address NOTE: i The settings for connecting to your company network may differ from one installation to another. To ensure network security, your Information Technology (IT) administrator will need to oversee the installation and specify the appropriate configuration parameters. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 51 Chapter 3 • Installing the Drivers and Setting Up the Device You can also use the Reset Button to switch from Infrastructure Mode back to Mini Access Point Mode (the Wi-Fi default). Just push and hold the button until all the lights on the front of the INLINE™ 7 flash (about 5 seconds). The File Menu The File menu has one feature, Exit. You use the Exit feature to close the Cummins INLINE™ 7 Explorer. To exit the Cummins INLINE™ 7 Explorer: 1 Select File from the Cummins INLINE™ 7 Explorer menu bar. Figure 3.28 Exit Selected 2 Select Exit. The Cummins INLINE™ 7 Explorer closes. 52 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Using the Cummins INLINE™ 7 Explorer Utility The Tools Menu The Tools menu provides the following features: • Ping • Options Ping The Ping feature uses the PING protocol to check for the presence of a device on the network. To check for a device: 1 Select Tools from the Cummins INLINE™ 7 Explorer menu bar. 2 Select Ping. Figure 3.29 Ping Dialog Box 3 Enter the IP address of the device you want to locate (e.g., 192.168.123.107). 4 Click Start. The Cummins INLINE™ 7 Explorer searches for the device and, if found, displays the reply. 5 Click Stop. 6 Click the Close button on the dialog box. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 53 Chapter 3 • Installing the Drivers and Setting Up the Device Options The Options feature provides the following features, which are presented as check boxes: • Start INLINE 7 Explorer when Windows starts (pg. 54) • Show New INLINE 7 Notification (pg. 55) Start INLINE7 Explorer when Windows Starts You use this feature to manage when the Cummins INLINE™ 7 Explorer opens. The default is to not open the Cummins INLINE™ 7 Explorer when Windows starts. Figure 3.30 Options Menu To change the default, click on the check box to add the check mark. Then click OK. 54 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual - Using the Cummins INLINE™ 7 Explorer Utility Show New INLINE7 Notification You use this feature to manage when to display the New INLINE7 notification message box. Figure 3.31 Notification Box The default is to display the notification message box whenever a new INLINE™ 7 is detected. Figure 3.32 Options Menu To change the default, click the box to remove the check mark. Then click OK. Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual 55 Chapter 3 • Installing the Drivers and Setting Up the Device The Help Menu The Help menu has one feature, About. You use the About feature to display information about the Cummins INLINE™ 7 Explorer. To access the Help menu: 1 Select Help from the Cummins INLINE™ 7 Explorer menu bar. 2 Select About. Figure 3.33 About Cummins INLINE™ 7 Explorer 3 When you have finished reviewing the information, click OK to close the dialog box. 56 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Technical Publications, IDSC Holdings LLC Create Date : 2015:12:16 09:41:14Z Modify Date : 2016:09:15 12:03:10-04:00 Subject : Part No. 965062 Revised: 12/16/2015 Has XFA : No Language : en Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 10.1.16 (Windows) Creator Tool : FrameMaker 10.0.2 Metadata Date : 2016:09:15 12:03:10-04:00 Format : application/pdf Title : Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual Creator : Technical Publications, IDSC Holdings LLC Description : Part No. 965062 Revised: 12/16/2015 Document ID : uuid:251bf464-cd03-4953-ad5a-e13d38c084f7 Instance ID : uuid:7e7e46b5-adfb-441c-a8a2-e27dbcbb0b1d Page Mode : UseOutlines Page Count : 60EXIF Metadata provided by EXIF.tools