IDT Technology AD932 BLE Dongle User Manual Model AD268
IDT Technology Limited BLE Dongle Model AD268
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2172326 |
| Application ID | 7xFht9o6Z08putfeUOMvwg== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 8.96kB (111949 bits) |
| Date Submitted | 2014-01-21 00:00:00 |
| Date Available | 2014-01-21 00:00:00 |
| Creation Date | 2013-12-20 15:55:33 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2013-12-20 15:55:33 |
| Document Title | Model: AD268 |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | clguo |
USB Bluetooth Smart Dongle Model: AD932 USER MANUAL EN OVERVIEW ESTABLISH CONNECTION CONNECT TO CONSOLE Plug our USB Bluetooth Smart Dongle (AD932) into the console’s USB port. The Dongle automatically runs the program and receives the Bluetooth Smart signal when it has established connection with the console. Make sure the plug is intended to be correctly oriented in direction of the Dongle You may comply the USB Bluetooth Smart Dongle with corresponding software SPECIFICATION TYPE LxWxH DESCRIPTION 18 x 6.5 x 21 mm (0.7 x 0.3 x 0.8 inches) ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. For any enquiry, please contact our Customer Services at info@oregonscientific.com. Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail. EU-DECLARATION OF CONFORMITY Hereby, Oregon Scientific, declares that USB Bluetooth Smart Dongle (model: AD932) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. FCC STATEMENT The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientifific.com), or on the warranty card for this product for all inquiries instead. We Name: Address: Telephone No.: Oregon Scientific, Inc. 10778 SW Manhasset Dr. UNIT B-2 Tualatin, Or 97062 USA 1-800-853-8883 declare that the product Product No.:AD932 Product Name: USB Bluetooth Smart Dongle Manufacturer: IDT Technology Limited Address: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong Kong This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 3 Language : zh-TW Tagged PDF : Yes Title : Model: AD268 Author : clguo Creator : Microsoft® Office Word 2007 Create Date : 2013:12:20 15:55:33+08:00 Modify Date : 2013:12:20 15:55:33+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools