IDT Technology BBR211-01 Baby Bath Thermometer + Wireless Baby Monitor User Manual

IDT Technology Limited Baby Bath Thermometer + Wireless Baby Monitor

User Manual

Baby Bath™ Thermometer + Wireless Baby MonitorOQ005 InstructionsRead and save these instructions.OQ005 IM_v1 1105-PB 0216.indd 1 2/17/06 1:51:53 PM
Table of ContentsBaby Bath™ Thermometer ..........................................................5This is Not a Toy ........................................................................5Warnings ...................................................................................5Precautions ................................................................................6General Instructions ...................................................................7 Front of the Product ...............................................................7 Back of the Product................................................................8 Batteries .................................................................................9 Power On/Off ........................................................................9 Basic Functions ....................................................................10 Technical Specifications ........................................................13Baby Monitor with Indoor Temperature ...................................14Precautions ..............................................................................14Warnings .................................................................................16General Instructions .................................................................17 Front View – “Parent” Unit ...................................................17OQ005 IM_v1 1105-PB 0216.indd 2 2/17/06 1:51:54 PM
Table of Contents Back View – “Parent” Unit ...................................................18 LCD – “Parent” Unit ............................................................19 Front View – “Baby” Unit .....................................................20 Back View – “Baby” Unit .....................................................21 Power Requirements ............................................................22 Neck Lanyard – “Parent Unit ................................................24 Power On/Off ......................................................................25 Setup ...................................................................................25 Selecting Channels – “Baby” Unit ........................................26 Night-Light – “Baby” Unit ....................................................26 Volume ................................................................................26 Sound Light Indicators ..........................................................27 Connection Signal Status ......................................................27 Lost-Link Alarm ....................................................................27 Temperature Display ............................................................28 Clock/Alarm .........................................................................28 Set Clock/Voice-Activation Sensitivity Level ..........................28OQ005 IM_v1 1105-PB 0216.indd 3 2/17/06 1:51:54 PM
Table of Contents Setting the Alarm..................................................................29 Feeding Timer ......................................................................30 Backlight ..............................................................................31 Reset ....................................................................................32 Specifications .......................................................................32 Statement of FCC Compliance .............................................34 FCC Label Compliance Statement ........................................35OQ005 IM_v1 1105-PB 0216.indd 4 2/17/06 1:51:54 PM
This is Not a ToyProduct is tested and is in compliance with toy safety standard EN71. IT IS NOT meant to be used as A TOY and is not suitable for children under 3 years.Please retain this instruction manual for future reference.Warnings• This product should only be operated by an adult and should not be used as a toy for children.• This product is not intended and should not be used as a re-placement for responsible adult supervision; it only acts as a support for your child-caring purpose. Any type of liability beyond statutory warranty regulations or resulting from improper use of this product and/or use not in accordance with product warnings, precautions and instructions is excluded.Baby Bath Thermometer5OQ005 IM_v1 1105-PB 0216.indd 5 2/17/06 1:51:54 PM
This unit is engineered to provide you with years of satisfactory service, if you handle it carefully. The following are precautions that should be observed:• Do not clean the unit with abrasive or corrosive materials. This may scratch the plastic parts and corrode the electronic circuit.• Clean the product thoroughly after each bath. Rinse with warm water and dry with a soft, dry cloth. Never store the product when it is wet.• Do not subject the unit to excessive force, shock, dust or ex-treme temperature or humidity. This may result in malfunction, shorter electronic lifespan, damaged battery and distorted parts.• Do not tamper with the unit’s internal components. This will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts.• Only use fresh batteries. Do not mix new and old batteries together as the old batteries may leak.Precautions6OQ005 IM_v1 1105-PB 0216.indd 6 2/17/06 1:51:54 PM
• Due to continuing improvements, actual product may differ slightly from the product described herein.• The technical specifications for this product and the contents of the instruction manual are subject to change without notice.General InstructionsFront of the Product1. MEMORY appears on the LCD when you are setting or displaying a user-defined temperature.2. button turns the unit on or off. It also disables the alarm sound.Precautions712345OQ005 IM_v1 1105-PB 0216.indd 7 2/17/06 1:51:59 PM
3. The LCD also shows the temperature in °C or °F.4. MEMORY button sets the user-defined temperature range. It also disables the alarm sound.5. Low-battery indicatorBack of the Product1. The RESET button returns all the settings to default values.2. Thermo sensor takes water-temperature readings.3. °C/°F button selects the temperature unit.4. Battery compartment holds 2 AAA batteries (included).Front of the Product81234OQ005 IM_v1 1105-PB 0216.indd 8 2/17/06 1:52:00 PM
1. Remove the screws. (When you first remove the product from its packaging, the screws will already be loose.)2. Once loose, pull the two sections apart, or to remove the base, insert a blunt instrument into the groove.3. Insert 2 AAA batteries (included), ensuring proper +/– polarities are observed. 4. To close, line up the dot with the groove. The screw holes are now lined up.5. Tighten the screws. Ensure the unit is firmly closed to keep it watertight.Notes:• appears when the batteries are running low.• To save power, the unit automatically turns off after 30 minutes.Power On/OffTo turn the unit on and off, press and hold the button for two seconds.Batteries9OQ005 IM_v1 1105-PB 0216.indd 9 2/17/06 1:52:00 PM
Temperature RangesTo obtain a temperature reading, place the unit in the water. The unit has three preset temperature ranges to indicate when the bath water is cold, comfortable or hot.Comfort LevelColor Temperature Range °FTemperature Range °CCold Red 32.0°F - 89.9°F 0.0°C - 31.9°CComfortable Green 90.0°F - 100.0°F 32.0°C - 37.0°CHot Red 100.1°F - 122.0°F 37.1°C - 49.9°CComfort-Level BacklightWhen the temperature changes from one comfort level to another, the LCD illuminates. For example, green when it falls within the Comfortable range and red when it is above or below the Comfortable range.Hot/Cold Alarm AlertThe unit emits an alarm sound if the temperature is 68°F/20°C or lower, or 104°F/40°C or higher.Basic Functions10OQ005 IM_v1 1105-PB 0216.indd 10 2/17/06 1:52:00 PM
Temperature UnitTo change the display measurement unit, slide the °C/°F switch to the desired setting.User-defined Temperature RangeThe default comfort temperature range for the baby’s bath water is 90°F to 100°F (32°C to 37°C). To set a new water-temperature range to the desired level:1. Mix the water thoroughly to help ensure the temperature is even.2. Press and hold MEMORY for two seconds.3. Place the unit in the water, ensuring the thermo sensor on the base of the unit is submerged in the water. While the unit is taking a measurement, MEMORY flashes on the display and the unit beeps for up to 10 seconds. Three short beeps will sound to confirm the measurement has been stored.4. The measured temperature appears on the LCD.Basic Functions11OQ005 IM_v1 1105-PB 0216.indd 11 2/17/06 1:52:00 PM
Notes:• To display the user-defined water temperature, press MEMORY.• The unit defines the temperature + or – 3.6°F (+ or – 2°C) of the temperature stored. For example, if the temperature re-corded is 80.6°F (27°C), any reading below 77°F (25°C) appears on the LCD as Cold and any reading above 84.2°F (29°C) appears on the LCD as Hot.• The user-defined temperature range can only be set if the water temperature is between 32°F and 98.6°F (0°C and 37°C). There-fore, if the recorded temperature is 96.8°F (36°C) (the comfort temperature range is from 93.2°F to 98.6°F (34°C to 37°C). The unit will show “- -” if the water temperature goes above 98.6°F (37°C).• MEMORY always appears on the LCD if the user-defined tem-perature range is set. To change the setting again, press and hold MEMORY. To clear the memory, press RESET.Basic Functions12OQ005 IM_v1 1105-PB 0216.indd 12 2/17/06 1:52:01 PM
Type DescriptionDisplay Temperature Range 32°F to 122°F (0°C to 50°C)Temperature Resolution +/– 0.1°C (0.2°F)Measurement Unit User-selectable °F/°CUnit Dimensions (H x W x D) Approximately 3" x 3" x 1"Unit Weight 3.88 ouncesBatteries 2 AAA (UM-4) 1.5VTechnical Specifications13OQ005 IM_v1 1105-PB 0216.indd 13 2/17/06 1:52:01 PM
PrecautionsThis unit is engineered to give you years of satisfactory service, if you handle it carefully. Here are a few precautions:• Do not immerse the unit in water.• Do not cover the ventilation holes. Ensure items that are nearby, such as newspapers, tablecloths, curtains, blankets, beddings, etc., cannot accidentally cover the ventilation holes.• Use a soft, slightly moistened cloth to clean the unit. Do not use abrasive or corrosive cleaning agents, as these may cause damage.• Do not subject the product to excessive force, shock, dust, temperature changes, humidity and direct sunlight for extended periods.• Do not tamper with the internal components. This will termi-nate the product warranty and may cause damage. The unit contains no user-serviceable parts.Baby Monitor with Indoor Temperature14OQ005 IM_v1 1105-PB 0216.indd 14 2/17/06 1:52:01 PM
• Remove the batteries before storing the product for a long time. Do not mix new and old batteries.Note: The technical specifications for this product and the contents of the instruction manual are subject to change without notice.CAUTION: To reduce the risk of electric shock, do not expose this appliance to rain or moisture.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries are supplied by Rickbery, NiMH, 3.6V, 700mAh, 3 AA per pack with wire.Note: Please retain this instruction manual for future reference.Precautions15OQ005 IM_v1 1105-PB 0216.indd 15 2/17/06 1:52:01 PM
• This product should only be operated by an adult and should not to be used as a toy for children.• This product is not intended and should not be used as a replacement for responsible adult supervision; it only acts as a support for your child-caring purpose. Any type of liability beyond statutory warranty regulations or resulting from impro-per use of this product and/or use not in accordance with product warnings, precautions and instructions is excluded.• Please ensure that this product and adapter cable are always kept out of the reach of your child and at least 3 feet away.• Never place the baby unit inside the baby crib or near water (e.g. bathtub, wet basement, etc.).• For indoor use only.Warnings16OQ005 IM_v1 1105-PB 0216.indd 16 2/17/06 1:52:01 PM
Front View – “Parent” Unit1. : Turns the unit on and off; activates backlight.2. Sound Light Indicators: Shows the sound level received from the “baby” unit.3. +/– : Increases and decreases volume; changes setting value; activates and disables alarm.4. MODE: Displays or sets the clock / alarm / voice-activation sensitivity level.5. : Sets and operates the feeding timer.6. SpeakerGeneral Instructions17123456OQ005 IM_v1 1105-PB 0216.indd 17 2/17/06 1:52:02 PM
1. AC Adapter Jack2. Table Stand3. RESET Button4. Lanyard Holes5. °C/°F SelectionBack View – “Parent” Unit1812345OQ005 IM_v1 1105-PB 0216.indd 18 2/17/06 1:52:03 PM
1. Connection / Signal Icon2. Low Battery on the “Baby” Unit3. Battery Status on the “Parent” Unit4. Voice Activation Sensitivity Level5. Alarm Icon6. Feeding Timer Icon7. Indoor Temperature8. Clock / Alarm / Timer 9. Volume LevelLCD – “Parent” Unit19123456789OQ005 IM_v1 1105-PB 0216.indd 19 2/17/06 1:52:04 PM
1. Microphone2. / : Turns the unit on and off; searches for channel.3. : Turn the night-light on and off.4. Night-light5. LED Indicator: Flashes during data transmission.Front View – “Baby” Unit2015432OQ005 IM_v1 1105-PB 0216.indd 20 2/17/06 1:52:05 PM
1. AC Adapter Jack2. Table Stand3. Battery Compartment4. RESET ButtonBack View – “Baby” Unit211234OQ005 IM_v1 1105-PB 0216.indd 21 2/17/06 1:52:06 PM
“Baby” UnitThe adapter should be used at all times. Insert one end of the adapter into the unit, then plug the other end into a wall outlet.The 3 AAA (UM-4 1.5V) batteries (purchase separately) are for backup use only. Before first use, insert the batteries, ensuring proper +/– polarities are observed.Power Requirements22OQ005 IM_v1 1105-PB 0216.indd 22 2/17/06 1:52:08 PM
“Parent” UnitThis unit uses a rechargeable battery pack (3 AAA/UM-4 NiMH). Insert the rechargeable battery pack by connecting the end of the wire into the indentation located at the bottom right of the battery compartment.To recharge the battery, connect the adapter into the unit, then plug the other end into a wall outlet.Power Requirements23OQ005 IM_v1 1105-PB 0216.indd 23 2/17/06 1:52:11 PM
An animated battery icon indicates that it is charging. steadily appears when the battery is fully charged. Before first use, charge the batteries for 12 hours and press RESET. After the first charge, you only need to charge the unit until the battery icon indicates that it is fully charged.Low BatteryFlashes when the “Baby” unit is low. A series of warning beeps is emitted every minute until the battery is fully exhausted.Flashes when the “Parent” unit is low. A series of warning beeps is emitted every minute until the battery is fully exhausted.Note: Press RESET after each battery charge.Neck Lanyard – “Parent” UnitFor portability, use the neck lanyard. Lanyard holes are located on the side of the “Parent” unit.Power Requirements24OQ005 IM_v1 1105-PB 0216.indd 24 2/17/06 1:52:12 PM
To turn either unit on or off, press and hold .Setup1. Insert batteries and plug in adapters.2. Turn the “Baby” unit on, then turn on the “Parent” unit.3. Place the two units close to each other for five seconds. This allows the units to “recognize” each other.4. Position the units no more than 980 feet (300 meters) from each other.For best results:• Keep the units away from electrical or mechanical objects, direct sunlight or moisture.• Do not exceed the 980-foot (300-meter) transmission range between the two units.• Minimize obstructions, such as doors, walls and furniture as those obstructions decrease the transmission range between the two units.In order to obtain optimal reception, you may need to experi-ment with various locations.Power On/Off25OQ005 IM_v1 1105-PB 0216.indd 25 2/17/06 1:52:12 PM
If there is interference or transmission trouble between the two units, press the button on the “Baby” unit.Night-Light – “Baby” UnitTo turn the night-light on and off, press the button.VolumeTo change the volume (0-5), press the +/– button on the “Parent” unit.Notes:• All the alarm sounds are independent of the volume level.• You may hear a high-pitched noise if the “Parent” unit is placed too close to the “Baby” unit. The noise stops once the units are moved away from each other.Selecting Channels – “Baby” Unit26OQ005 IM_v1 1105-PB 0216.indd 26 2/17/06 1:52:12 PM
The sound light indicators on the “Parent” unit can alert you visu-ally to a baby’s sound. The louder the sound received from the “Baby” unit, the more the lights are on.Connection Signal StatusThe connection icon shows you the status of the signal between the two units.Lost LinkNormal Signal The icons are animated when the two units are linked.Lost-Link AlarmWhen the “Parent” unit cannot receive data from the “Baby” unit (due to interference or out-of-range distance), an alarm sounds and flashes. The temperature reading shows “---.” The alarm sound only stops when the connection between the two units is reestablished.Sound Light Indicators27OQ005 IM_v1 1105-PB 0216.indd 27 2/17/06 1:52:13 PM
The “Baby” unit measures the surrounding temperature. If “---” is shown, the “Baby” unit cannot transmit the temperature reading.Slide the °C/°F switch, located in the battery compartment of the “Parent” unit, to the desired setting.Clock/AlarmTo toggle between the clock and the alarm display, press the MODE button.Set Clock/Voice-Activation Sensitivity Level1. To enter Setting mode, press and hold MODE button.2. To change the setting, press + or – button. To scroll through the numbers quickly, press and hold + or – button.3. To confirm a setting and move on to the next one, press MODE. The setting sequence is as follows: 1. 12/24-hour mode 3. Minute 2. Hour 4. Voice-Activation Sensitivity Level (0-3)Temperature Display28OQ005 IM_v1 1105-PB 0216.indd 28 2/17/06 1:52:13 PM
Level Sensitivity0 Maximum3 High2 Medium1 LowNote: The voice-activation sensitivity feature increases/decreases the level of sound the “Parent” unit emits. When set to 0, all sounds, regardless of level, can be heard on the “Parent” unit.Setting the Alarm1. To view alarm display, press MODE.2. To select alarm on, press + or –.3. To enter the Setting mode, press and hold MODE.Set Clock/Voice-Activation Sensitivity Level29OQ005 IM_v1 1105-PB 0216.indd 29 2/17/06 1:52:13 PM
4. To change the setting, press + or –. To quickly scroll through the numbers, press and hold + or –.5. To confirm a setting and move on to the next one, press MODE. The setting sequence is hours, then minutes.To Activate or Deactivate the AlarmWhen in Alarm display, press + or –. If the alarm is off, “—” appears.To Stop the Alarm SoundPress any button except .Feeding TimerThe feeding timer is useful to help you develop a feeding routine for your baby.To Set the Timer1. To view the feeding timer display, press the .2. To enter the setting mode, press and hold .Setting the Alarm30OQ005 IM_v1 1105-PB 0216.indd 30 2/17/06 1:52:13 PM
3. To increase or decrease the time in 30-minute intervals, press + or –. To quickly scroll through the numbers, press and hold + or –.4. To confirm, press .Timer Functions• To start/stop/retrieve the last setting, press the .• To reset the timer, press and hold or press RESET.• To view the clock while the timer is running, press MODE. flashes when the timer is in use.• To turn off the 2-minute alarm that sounds when the timer has reached 0, press any button except .Note: If a button is not pressed after one minute when you are in the Timer Display mode, it returns to the Clock Display mode.BacklightTo turn the “Parent” unit backlight on for 8 seconds, press the .Feeding Timer31OQ005 IM_v1 1105-PB 0216.indd 31 2/17/06 1:52:14 PM
To return either unit to the default settings, insert a blunt stylus into the RESET hole, located in the battery compartment of each unit.SpecificationsType DescriptionClock Time 12- or 24-hour formatAlarm 2 minutesFeeding Timer 30 minutes to 24 hoursRF Frequency 2.4GHzTransmission Range 980 feet (300 meters) open areaTemperature Measuring Range 14°F to 122°F (–10°C to 50°C)Operating Range 32°F to 122°F (0°C to 50°C)Temperature Unit °C/°FReset32OQ005 IM_v1 1105-PB 0216.indd 32 2/17/06 1:52:14 PM
Power Description“Baby” Unit 6V DC 200mA AC adapter/ 3 x 1.5V UM-4/AAA batteries“Parent” Unit 6V DC 200mA AC adapter/ 3.6V NiMH rechargeable battery packMeasurements DescriptionDimensions – Both Units (H x W x D)Approximately 4" x 21/2" x 2" (96 x 63 x 40 mm)Weight – “Parent” Unit 2.4 ounces (68 grams) without batteryWeight – “Baby” Unit 2.2 ounces (62 grams) without batterySpecifications33OQ005 IM_v1 1105-PB 0216.indd 33 2/17/06 1:52:14 PM
FCC Compliance Statement34Statement of FCC ComplianceWARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-cations. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:OQ005 IM_v1 1105-PB 0216.indd 34 2/17/06 1:52:14 PM
WarrantyWhat Is CoveredThis warranty covers any defects in materials or workmanship, with the exceptions stated below.How Long Coverage LastsThis warranty runs for 90 days from the date of original purchase.What Is Not CoveredThis warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts. What The Sharper Image Will DoThe Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible, The Sharper Image will either replace this product with one of similar features and price, or refund the full purchase price of the product, whichever you prefer.How to Obtain ServiceReturn the product and receipt, along with a brief explanation of the problem, to: T.S.I. - Returns Department 2901-A West 60th Street Little Rock, AR 72209If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or by email at care@web.sharperimage.com.This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.© 2006 Sharper Image CorporationSharper Image Corporation 350 The Embarcadero, Sixth Floor San Francisco, CA 94105-1218 (415) 445-6000Shop online: Due to continuing improvements, actual product may differ slightly from the product described herein.V1 12/05OQ005 IM_v1 1105-PB 0216.indd 36 2/17/06 1:52:14 PM

Navigation menu