IDT Technology IH300-01 Instant Forecast Hub (433.92MHz Tx) User Manual i600 EN RUNNING UM R2 indd

IDT Technology Limited Instant Forecast Hub (433.92MHz Tx) i600 EN RUNNING UM R2 indd

User Manual

EN1CONTENTSIntroduction ............................................................... 2Packaging contents .................................................. 2Overview .................................................................... 3 Front view ............................................................... 3 Back view ............................................................... 3 USB communications hub ...................................... 4 Outdoor thermo-hygro sensor ................................ 4Getting Started .......................................................... 4 Set up remote sensor ............................................. 4 Set up main unit ..................................................... 5Set up software (first time use) ............................... 6 Windows XP ........................................................... 6 Windows Vista ........................................................ 6Disable sleep mode .................................................. 6 To disable sleep mode on computer (Windows XP ) ....................................................... 6 To disable sleep mode on computer (Windows Vista) ..................................................... 7Set up USB communications hub ........................... 7Main unit screen display .......................................... 7 To change display modes ....................................... 7 To view different warning messages ...................... 8 Weather forecast .................................................... 8Clock .......................................................................... 8 To manually set clock ............................................. 8Alarm ......................................................................... 8 To set alarm ........................................................... 8 To activate / deactivate alarm ................................ 8 To silence alarm ..................................................... 8Backlight ................................................................... 8Reset .......................................................................... 8Specifications ........................................................... 9Precautions ............................................................... 9About Oregon Scientific ........................................ 10EU-Declaration of Conformity ............................... 10FCC Statement .........................................................11 Declaration of conformity ..................................... 11Global 5-Day Weather Adviser IIModel: I600USER MANUALi600_EN_RUNNING_UM_R2.indd 1 2008.7.22 5:50:30 PM
EN2INTRODUCTIONThank you for selecting the Oregon Scientific™ Global 5-Day Weather Adviser II (I600).The weather station is capable of connecting to a PC computer using the USB connection. By installing the PC software, world cities can be user-selectable. The software can also download and display the latest weather data and time of the selected cities.For full details see software instructions.PC system requirementsThe minimum system requirements for use of the software is:• Operating system: Microsoft Windows XP SP2 or Vista• Processor: Pentium 4 or above• RAM: Min. 512MB• Hard disk free space: Min. 512MB• Screen Display Area: 1024 x 768 pixels (recommended) NOTE The USB is only used for the uploading and downloading of weather data. It is not to be used for charging battery power. NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about.PACKAGING CONTENTS1 x USB Cable1 x Remote Sensor1 x USBCommunications Hub3 x AA UM-3 1.5V Batteries2 x AAAUM-4 1.5V Batteries1 x Main Uniti600_EN_RUNNING_UM_R2.indd 2 2008.7.22 5:50:41 PM
EN3OVERVIEWFRONT VIEW1 2 3 4 56789101112131. : Information signal reception indicator2. : Indicate AM / PM3. : Indicate daily alarm is On4. : Indicate alarm time is displayed5. : Main unit batteries low6. City name / Clock / Calendar / Scrolling warning message7. Today’s weather forecast (home environment)8. Today’s regional weather forecast (user selected city)9. : Indicate outdoor sensor reception status10. : Sensor batteries low11. Current indoor / outdoor temperature / humidity (home environment)12. Today’s regional HI / LO temperature (user selected city)13. Next 4 day regional weather forecast with HI / LO temperature (user selected city)BACK VIEW123457681. SNOOZE · MESSAGE: Activate snooze alarm; turn on backlight; toggle between city / weather warning / advisory message2. ALARM: Change settings / display; activate/deactivate alarm; set alarm3. MODE: Toggle between calendar display and currently selected city; set clock4. UP: Initiate sensor search; increase value of the setting; display next city’s data5. DOWN: Decrease value of the setting; display previous city’s data6. Wall mount holes7. RESET: Reset unit to default settings8. ºC / ºF: Select temperature uniti600_EN_RUNNING_UM_R2.indd 3 2008.7.22 5:51:00 PM
EN4USB COMMUNICATIONS HUBFRONT VIEW BACK VIEW Front View:1. LED status indicator: Blink during registration with main unit or during sensor search; indicate a successful USB connectionBack View:1. SEARCH: Initiate search for remote sensors2. RESET: Reset USB Communications Hub to default settings3. USB port: Upload / download records to / from PCOUTDOOR THERMO-HYGRO SENSORFRONT VIEW BACK VIEW1132Front View:1. LED status indicator: Blink when transmitting a readingBack View:1. RESET: Reset unit to default settings2. Channel switch3. Battery compartmentGETTING STARTEDSET UP REMOTE SENSOR1. Slide open the battery door.2. Select channel.3. Insert the batteries, matching the polarities (+ / -) and press RESET.4. Close the battery door.i600_EN_RUNNING_UM_R2.indd 4 2008.7.22 5:51:04 PM
EN5 NOTE • Install batteries in the remote sensor before installing the USB Communications Hub and main unit.• Press RESET after each battery change.5. Secure the sensor in the desired location using the wall mount bracket.6. Press SEARCH on USB Communications Hub to initiate search and start receiving data from the sensor. NOTE USB Communications Hub will search only for already registered sensor or new sensor reset within last 30 minutes. To register a new sensor, reset sensor prior to search.7. Press and hold UP and DOWN on the main unit to initiate sensor search.For best results:• Place the sensor within 100 m (300 ft) of the USB Communications Hub and main unit.• Position the sensor so that it faces the USB Communications Hub and main unit, minimizing obstructions such as doors, walls and furniture.• Place the sensor out of direct sunlight and moisture.• Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects.• Position the sensor close to the USB Communications Hub and main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.SET UP MAIN UNIT1. Remove the battery compartment cover.2. Insert the batteries, matching the polarities.3. Press RESET after each battery change. NOTE Batteries should not be exposed to excessive heat such as sunshine or fire.i600_EN_RUNNING_UM_R2.indd 5 2008.7.22 5:51:09 PM
EN6SET UP SOFTWARE (FIRST TIME USE)WINDOWS XPTo install software:1. Run CD software provided.2. Setup wizard dialogue box will appear and guide you through the installation process.3. After successful installation, double click on desktop shortcut.4. Click DISPLAY in Oregon Weather Station dialogue box.Select Cities:5. Click next to 5 day weather forecast.6. On the new page that appears, there will be cities set as default. To change, click CHANGE.7. In the Settings… dialogue box, City tab, select cities in the drop down menus (Region; Country / Area; City / US Zip).8. Click OK.WINDOWS VISTATo Disable User Access Control (UAC):1. From the desktop, My Computer > Control Panel > User Accounts and Family Safety > Change your Windows password > Turn User Account Control On or Off.2. Deselect the UAC option by un-ticking.3. Follow steps 1-8 from above section.DISABLE SLEEP MODETo allow for continuous update of data, ensure Sleep Mode on computer is disabled.TO DISABLE SLEEP MODE ON COMPUTER (WINDOWS XP)1. Right click on Desktop.2. Choose “Properties”.3. Click on “Screen Saver” Tab in the Display Properties window.4. Click on “Power” located at the bottom half of window.5. A new window “Power Options Properties” will open.6. Under “System standby” option, choose “Never” in drop down menu.7. Click “Apply” and then click “OK”.8. Previous window will return. Click “OK” to confirm and exit.i600_EN_RUNNING_UM_R2.indd 6 2008.7.22 5:51:19 PM
EN7TO DISABLE SLEEP MODE ON COMPUTER (WINDOWS VISTA)1. Right click on Desktop.2. Choose “Personalize”.3. Click on “Screen Saver” Tab in the Display Properties window.4. Click on “Change Power Settings” located at the bottom half of window.5. Select “High Performance” and click “Change plan settings”.6. Click “Change advanced power settings”.7. Click “Sleep” and click “Hibernate after”.8. Click “Setting” and set “0” minutes.9. Click “Apply” and then “OK”.SET UP USB COMMUNICATIONS HUB NOTE Set up the remote sensor before installing the USB Communications Hub.Approximately 30 minutes daily connection to computer is sufficient to receive current weather data. For continuous use, always connect the USB Communications Hub to the computer using the USB cable provided. There is a registration mode with the main unit when the USB Communications Hub is turned on the first time, or after each installation. IMPORTANT Registration can take half an hour. Do not turn off computer / disconnect USB from computer during this time.Continuous display of indicates data transfer is successful.MAIN UNIT SCREEN DISPLAYTO CHANGE DISPLAY MODESTo toggle between 5 cities:Press UP or DOWN.To view alarm time and status:Press ALARM.To toggle between calendar display and currently selected city:Press MODE.i600_EN_RUNNING_UM_R2.indd 7 2008.7.22 5:51:21 PM
EN8TO VIEW DIFFERENT WARNING MESSAGESPress SNOOZE · MESSAGE.WEATHER FORECASTFor your convenience there is an enclosed sheet listing individual weather icons and their respective meanings.The number of days with weather forecast available is dependent on data provided by local observatories.CLOCKTO MANUALLY SET CLOCK NOTE This product is designed to synchronise its calendar clock automatically with the information downloaded from the PC. 1. Press and hold MODE to enter settings.2. Press UP / DOWN to change settings.3. Press MODE to confirm settings.The settings order is: 12/24 hour format, hour, minute, year, month-day / day-month, month, day and language. NOTE The language options are English (ENG), German (GER), French (FRE), Italian (ITA), Spanish (SPA) and Russian (RUS).ALARMTO SET ALARM1. Press ALARM to enter Alarm mode.2. Press and hold ALARM to enter settings.3. Press UP / DOWN to set hour / minute.4. Press ALARM to confirm settings.TO ACTIVATE / DEACTIVATE ALARM1. Press ALARM to enter Alarm mode.2. Press ALARM repeatedly until desired option is displayed ( / “OFF”).3. Press MODE to confirm and return to clock display.TO SILENCE ALARM• Press SNOOZE · MESSAGE to silence it for 8 minutes.OR• Press any key to turn the alarm off and activate it again after 24 hours. BACKLIGHTPress SNOOZE · MESSAGE to activate LED backlight for 8 seconds.RESETPress RESET to return to the default settings.i600_EN_RUNNING_UM_R2.indd 8 2008.7.22 5:51:21 PM
EN9SPECIFICATIONSMAIN UNITDimensions (L x W x H) 189 x 42 x 119 mm (7.4 x 1.7 x 4.7 in)Weight 350 g (12.35 oz) without batteryPower 3 x UM-3 (AA) 1.5V batteriesINDOOR TEMPERATURETemperature unit °C / °FDisplayed range 0°C to 50°C (32°F to 122°F)Operating range -5°C to 50°C (23°F to 122°F)Resolution 0.1°C (0.2°F)INDOOR RELATIVE HUMIDITYDisplayed range 2% to 98%Operating range 25% to 90%Resolution 1%USB COMMUNICATIONS HUBDimensions (L x W x H) 68 x 46 x 136 mm (2.7 x 1.8 x 5.4 in)Weight 92 g (3.2 oz) without batterySignal frequency 433 MHzTransmission range 100 m (300 ft) unobstructedInformation update Approximately every 10 minutesRegistration period Approximately 20 minutesPower Via PC through USB cableOUTDOOR REMOTE THERMO-HYGRO SENSORL x W x H 62 x 20 x 90 mm (2.4 x 0.8 x 3.5 in)Weight 50 g (1.76 oz) without batteryTemperature range -20°C to 60°C (-4°F to 140°F)Temperature resolution 0.1°C (0.2°F)Humidity range 5% to 95%Humidity resolution 1%Signal frequency 433 MHzTransmission range 100 m (300 ft) unobstructedTransmission period Approximately every 60 secondsNumber of channels 3Power 2 x UM-4 (AAA) 1.5V batteriesCLOCK / CALENDARClock display HH:MMHour format 12hr AM/PM or 24hrCalendar DD/MM or MM/DDPRECAUTIONS• Do not subject the unit to excessive force, shock, dust, temperature or humidity.• Do not cover the ventilation holes with any items such as newspapers, curtains etc.• Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.• Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit’s internal components. This invalidates the warranty.i600_EN_RUNNING_UM_R2.indd 9 2008.7.22 5:51:22 PM
EN10• Only use fresh batteries. Do not mix new and old batteries.• Images shown in this manual may differ from the actual display.• When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.• Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information.• The contents of this manual may not be reproduced without the permission of the manufacturer.• Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.• Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use. NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer.ABOUT OREGON SCIENTIFICVisit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support For international inquiries, please visit: www2.oregonscientific.com/about/internationalEU-DECLARATION OF CONFORMITYHereby, Oregon Scientific, declares that this Global 5-Day Weather Adviser II (Model: I600) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.COUNTRIES RTTE APPROVAL COMPLIED and Norway N All EU countries, Switzerland CHi600_EN_RUNNING_UM_R2.indd 10 2008.7.22 5:51:22 PM
EN11FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio / TV technician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific.com, or on the warranty card for this product) for all inquiries instead.WeName: Oregon Scientific, Inc.Address: 19861 SW 95th Ave.,Tualatin, Oregon 97062 USATelephone No.: 1-800-853-8883declare that the product Product No.: I600Product Name: Global 5-Day Weather Adviser IIManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate, Phase 1,41 Man Yue St., Hung Hom, Kowloon, Hong Kongis in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.i600_EN_RUNNING_UM_R2.indd 11 2008.7.22 5:51:22 PM
EN12Global 5-Day Weather Adviser IIModel: I600USER MANUALi600_EN_RUNNING_UM_R2.indd 12 2008.7.22 5:51:23 PM
EN13© 2008 Oregon Scientific. All rights reserved.086L005367-011Global 5-Day Weather Adviser IIModel: I600USER MANUALi600_EN_RUNNING_UM_R2.indd 13 2008.7.22 5:51:23 PM

Navigation menu