IDT Technology RMR939PA-01 RF Projection Clock with Remote Motion Sensor User Manual RMR939PA English R7
IDT Technology Limited RF Projection Clock with Remote Motion Sensor RMR939PA English R7
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 496409 |
| Application ID | n+VPzG/cOgb1JEYzCAKlPQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 236.35kB (2954366 bits) |
| Date Submitted | 2004-12-14 00:00:00 |
| Date Available | 2004-12-14 00:00:00 |
| Creation Date | 2004-10-20 10:34:57 |
| Producing Software | Acrobat Distiller 5.0.2 for Macintosh |
| Document Lastmod | 2004-11-17 10:35:24 |
| Document Title | RMR939PA English R7 |
| Document Creator | PageMaker 6.5 |
| Document Author: | G4-5 |
POLERMO Projection Clock with Motion Alert Model: RMR939PA / MSR939A USER MANUAL RMR939PA English Cover R7 10/20/04, 10:34 AM Clock / Calendar Display ..................................... 13 Setting the Clock / Calendar ................................ 14 Backlight ................................................................. 14 Temperature ............................................................ 14 USER MANUAL Alarm ....................................................................... 15 Alarm Display ...................................................... 15 CONTENTS Setting the Alarm(s) ............................................. 15 Introduction .............................................................. 2 Activating / Deactivating the Alarm(s) .................. 15 Product Overview .................................................... 3 Alarm Sound ........................................................ 15 Front View .............................................................. 3 Snooze / Turning the Alarm OFF ......................... 15 Back View .............................................................. 5 Motion Alarm .......................................................... 16 LCD Display ........................................................... 6 Motion Alarm Setting Display ............................... 16 Remote Motion Sensor (MSR939A) - Front View .. 8 Setting the Motion Alarm ...................................... 16 Remote Motion Sensor (MSR939A) - Back View .. 9 Turning the Motion Alarm OFF ............................ 17 Safety and Care ...................................................... 10 Sleep Timer ............................................................. 17 Safety Precautions ............................................... 10 Projection Unit ....................................................... 18 Caring for this Product ......................................... 10 Motion Sensor (MSR939A) .................................... 18 Getting Started ....................................................... 10 Setup Sensor ....................................................... 18 Package Contents ............................................... 10 Wake-Up Vibration Alarm - VR101A (Optional) .... 19 Batteries ............................................................... 11 Resetting the Clock ............................................... 19 AC Adaptor .......................................................... 12 Warnings ................................................................. 20 About Atomic Clock Reception ............................ 12 Troubleshooting ..................................................... 20 Turning the Atomic Clock Signal ON / OFF ......... 13 Technical Specifications ....................................... 21 RMR939PA English R7 10/20/04, 10:34 AM EN Clock / Calendar ..................................................... 13 POLERMO Projection Clock with Motion Alert Model: RMR939PA / MSR939A EN Notices .................................................................... 23 INTRODUCTION Statement of Responsibility ................................. 23 Thank you for selecting the Oregon Scientific TM POLERMO Projection Clock with Motion Alert. This device is designed to give you many years of reliable service, including the following conveniences: About Oregon Scientific ........................................ 23 FCC Statement ....................................................... 24 Declaration of Conformity .................................... 23 • US Atomic Calendar Clock • Optional Wireless Vibration Alarm with 8-Minute Snooze Function (Wake-Up Vibrating Alarm VR101A can be purchased separately) • Sleep Function with 6 Soothing Sounds • 5 Alarm Melodies with 2 Volume Levels • 2-Minute Dual Alarm with 8-Minute Snooze Function • Time / Alarm Status Projection Unit • Security Alarm / Motion Sensor Unit • Indoor Temperature Display • Day of the Week in 1 of 5 Languages • Time Zone Hour Offset Function • Backlight for Clock Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. RMR939PA English R7 10/20/04, 10:34 AM EN PRODUCT OVERVIEW FRONT VIEW 1. SOUND / SLEEP button • Press to turn the soothing sound ON. • Press to wrap around the sleep timer setting as follows: 0 120 90 60 30 15 minutes. • Press and hold for 2 seconds to choose 1 of 6 soothing sounds. 2. SNOOZE / LIGHT button • Press to activate the 8-minute snooze function. • Press and hold for 2 seconds to turn snooze OFF and reset the alarm for the next day. • Press to activate the backlight and projection for 5 seconds. 3. LCD display 4. CLOCK ALARM button • Press to toggle between alarm 1 and alarm 2 ON / OFF. • Press and hold for 2 seconds to enter the Alarm Time Setting Mode. 5. MOTION ALARM button • Press to enter the Motion Alarm Mode; press again to toggle between motion alarm ON / OFF. RMR939PA English R7 10/20/04, 10:34 AM EN • Press and hold for 2 seconds to enter: - Motion Sensor Code. - Motion Alarm Setting Mode for motion alarm period and alarm type. 6. Projector Projects time and alarm status. 7. CLOCK button • Press to toggle between the following display modes: - Clock with seconds and calendar. - Clock with weekday and calendar. - Clock with time zone hour offset and calendar. • Press and hold for 2 seconds to enter the Clock Setting Mode - US time zone hour offset, 12- / 24-hour format, hour, minute, year, MM / DD or DD / MM format, month, day and day of the week language. 8. UP / DOWN button • Press to increase or decrease a setting. • Press and hold for 2 seconds to activate or deactivate atomic clock. • Press to increase or decrease the soothing sound volume. RMR939PA English R7 10/20/04, 10:34 AM EN BACK VIEW 1. Projector FOCUS knob • Twist to focus the projected image. 2. Projector IMAGE ROTATION knob • Twist to get the best viewing angle of the projected image. 3. PROJECTION ON switch • Slide to ON for continuous image projection when the AC power is connected. 4. Projector 180° ROTATION button • Press to rotate the image upside down. 5. 6V AC / DC Power Socket 6. Battery Compartment (cover on) • Uses 4 x UM-3 / AA 1.5V batteries. 7. RESET hole • Insert a thin blunt instrument to return all values to the default settings. 8. °C / °F switch • Press to select between °C / °F display format. RMR939PA English R7 10/20/04, 11:38 AM EN LCD DISPLAY 1. SOUND 10 • Appears when the sleep function is activated. 2. Battery Low icon • Appears when the clock batteries are low or, no batteries are installed and only the AC adaptor is connected. 11 12 13 14 15 16 17 18 19 3. Time • HH / MM, 12- / 24-Hour, AM / PM. 4. ZONE • Appears when you are in the Time and Zone Hour Offset display. 5. Channel 1 / 2 • Ch.1 or Ch.2 will appear when the related motion sensor is activated. 6. Motion Alarm ON icon 7. Calendar • DD / MM / YY or MM / DD / YY. 8. Temperature • °C / °F. 9. Atomic Clock Signal Reception icon • Shows the strength of the reception signal. RMR939PA English R7 10/20/04, 10:34 AM EN 10. MIN • Appears when the sleep function is activated. 11. Time Zone Hour Offset / Day of the Week • Offsets the atomic clock time setting when you are in a different time zone (+ / -23 hours). • Name of day available in 1 of 5 languages. 12. START • Start time for the motion sensor to be activated. 13. Alarm 1 • Indicator to show this is alarm 1. 14. Alarm 1 / 2 Time • Shows alarm times / AM or PM. 15. Melody Alarm icon • Shows when the clock alarm is set. 16. Vibration Alarm icon (Wake-Up Vibration Alarm optional item) • Appears on the display when the vibrating alarm has been set. 17. Alarm 2 • Indicator to show this is alarm 2. 18. STOP • Stop time for the motion sensor. 19. Motion Alarm Settings icon RMR939PA English R7 10/20/04, 10:34 AM EN REMOTE MOTION SENSOR (MSR939A) - BACK VIEW 1. Wall Mount 2. Battery Compartment (cover on) • Uses 3 x UM-3 / AA 1.5V batteries. 3. CHANNEL 1 / 2 • Slide to select either Channel 1 or Channel 2. 4. CODE switch • Slide to change the Code. 5. RESET hole • Insert a thin blunt instrument to return all values to the default settings. RMR939PA English R7 10/20/04, 10:34 AM EN SAFETY AND CARE • Keep your product away from hot, humid conditions or strong sunlight. SAFETY PRECAUTIONS • Every effort has been made to ensure the highest standards of reliability for your clock with remote motion sensor. However, if something does go wrong, please do not try to repair it yourself - consult your supplier. • Do not use your product outdoors in the rain, or handle it with wet hands - water can damage electrical equipment. Please observe the following safety precautions when setting up and using this product. • LCD panel - The LCD panel is made of glass, and may break if the unit is dropped. • Heat sources - Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products. • Water and moisture - Do not use the product in or near water or in high moisture areas, such as a bathroom. • Power source - The product may be susceptible to power surges. It should be unplugged during severe storms or whenever you will be away for a long time. Only use the type of power source specified in this manual. Do not overload power strips and extension cords, as this can cause a fire hazard. GETTING STARTED PACKAGE CONTENTS When you unpack your clock with remote motion sensor, make sure you keep all the packing materials in a safe place, in case you need to later transport the device or return it for servicing. CARING FOR THIS PRODUCT In the box, you will find: To ensure you receive the maximum benefit from using this product, please observe the following guidelines. • • Remote Motion Sensor • • 4 x UM-3 / AA 1.5V Batteries for the Clock Do not clean any part of the product with benzene, thinner or other solvent chemicals - this may cause permanent damage that is not covered by the guarantee. When necessary, clean it with a damp cloth. Clock Unit • 6V AC / DC Adaptor for the Clock • 3 x UM-3 / AA 1.5V Batteries for the Remote Motion Sensor 10 RMR939PA English R7 10 10/20/04, 10:34 AM The clock uses: • 4 x UM-3 / AA 1.5V batteries. The motion sensor uses: • 3 x UM-3 / AA 1.5V batteries. The optional wake-up vibration alarm VR101A (not included in the package) uses: • 2 x UM-3 / AA 1.5V batteries. To install the motion sensor batteries: NOTE It is recommended that you use alkaline batteries with this product for longer performance. To install the batteries, simply insert them making sure they match the correct polarities (+ and -). For best results, install batteries in the motion sensor before the clock. Press RESET after each battery change. NOTE Do not use rechargeable batteries for the clock or remote motion sensor. 11 RMR939PA English R7 11 10/20/04, 10:34 AM EN To install the clock batteries: BATTERIES • Press and hold the • The atomic clock reception icon will disappear from the display. button for 2 seconds. TURNING THE ATOMIC CLOCK SIGNAL ON / OFF To turn the atomic clock signal reception ON: CLOCK / CALENDAR • Press and hold the • The atomic clock reception icon will appear and flash on the display to indicate it is searching for the atomic clock signal. button for 2 seconds. CLOCK / CALENDAR DISPLAY There are 3 types of clock display: Calendar / Clock / Sec Calendar / Clock / Day Calendar / Clock / Offset Once batteries have been installed in the clock, the reception icon will flash to indicate it is searching for a signal. When the reception signal has been received the reception icon will show the signal strength by displaying between 0 and 3 waves: Strong Signal Weak Signal Press the CLOCK button to toggle between the 3 types of display. No Signal 13 RMR939PA English R7 13 10/20/04, 10:34 AM EN To turn the atomic clock signal reception OFF: NOTE For best results, place the clock away from metal or electrical objects, and near a window with a clear view to the sky. EN 6. Press CLOCK ALARM or MOTION ALARM to exit the Clock Setting Mode. SETTING THE CLOCK / CALENDAR Before you can manually set the clock and calendar, you must specify the current time zone you live in and the time format (12- or 24-hour) as follows: You can select 1 of the 5 following languages: SYMBOL 1. Press and hold the CLOCK button for 2 seconds. The time zone offset hour digits will flash. The default setting will be -8 which stands for Pacific time. Select the following for different US time zones: LANGUAGE English German -7 : Mountain time French -6 : Central time Italian -5 : Eastern time Spanish BACKLIGHT Press SNOOZE / LIGHT to activate the backlight for 5 seconds. TEMPERATURE 2. Enter the value by pressing the or buttons. To choose between °C / °F, press the °C / °F button to select the setting you want. 3. Confirm the entry by pressing the CLOCK button. The 12- or 24-hour display format will flash. 4. Repeat (2) and confirm the entry by pressing the CLOCK button. 5. Repeat the above procedures to set the hour, minute, year, MM / DD or DD / MM format, month, day and day of the week language. RMR939PA English R7 14 14 10/20/04, 10:34 AM ALARM DISPLAY The melody and vibration alarm icons indicate the daily alarm settings. Any disabled alarm will show no melody or vibration alarm icons. • Press the CLOCK ALARM button to toggle between alarm 1 and alarm 2 ON / OFF. • When the melody or vibration alarm icons appear on the display the alarm is activated. When the icons do not appear the alarm is deactivated. ALARM SOUND Alarm 1 (Melody) Alarm 2 Disabled When activated, the alarm icon flashes, the backlight will come on for 8 seconds and the alarm melody or beep sound will play. If no key is pressed the alarm will play for 2 minutes. Alarm 2 (Wake-Up) Alarm 2 Melody + Wake-Up SETTING THE ALARM(S) NOTE See "Setting the Alarm(s)" section to choose the alarm melody / beep alarm and / or the vibration alarm. 1. Press and hold CLOCK ALARM for 2 seconds to enter the Alarm Setting Mode. and 2. Alarm 1 will start flashing. Use the buttons to toggle between alarm 1 and 2. Then press CLOCK ALARM to select alarm 1 or 2. The hour will start flashing. 3. Enter the value by pressing the or SNOOZE / TURNING THE ALARM OFF To silence the alarm: • buttons. 4. Confirm the entry by pressing the CLOCK ALARM button and move on to the next setting. 5. Repeat (3 and 4) to set alarm 1 / alarm 2 - minute, melody alarm and / or vibration alarm (optional). If the melody alarm is selected, repeat (3 and 4) to select the melody / beep alarm sound and volume. OR • 6. The daily alarm will be on automatically after setting. Press CLOCK at any time to exit the Alarm Setting Mode. RMR939PA English R7 15 Press SNOOZE / LIGHT to silence it for 8 minutes. The alarm 1 or alarm 2 icon will flash to show snooze is enabled. Press and hold for 2 seconds to turn off snooze. Press any key except SNOOZE / LIGHT to mute the alarm and activate it again in 24 hours. 15 10/20/04, 10:34 AM EN ACTIVATING / DEACTIVATING THE ALARM(S) ALARM EN NOTE If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again in 24 hours. SETTING THE MOTION ALARM The motion alarm has a security / monitoring function, whereby when the motion sensor detects movement, it sets off the clock alarm for 5 minutes and the backlight will turn on for 10 seconds. The clock will also show which sensor has been activated - Ch.1 or Ch.2 will appear in the top left hand corner of the display. MOTION ALARM MOTION ALARM SETTING DISPLAY The motion sensor icon indicates the motion alarm setting. You can set the motion alarm to be activated over a set period of time i.e. during night time, by entering values next to the Start / Stop Hour in the process detailed below. However, it is important that you set the Code on the clock display to match the Code on the back of the motion sensor(s) so that the items can interact with each other. This process is also detailed below. 1. Press and hold MOTION ALARM for 2 seconds to enter the Motion Alarm Setting Mode. 1. Code icon 2. The Code will start flashing. Use the and buttons to choose the same Code setting as that displayed on the back of the motion sensor. Then press MOTION ALARM to select your chosen option. The start hour digits will start flashing. 2. Motion Sensor icon 3. Enter the value by pressing the or buttons. 4. Confirm the entry by pressing the MOTION ALARM button and move on to the next setting. 5. Repeat (3 and 4) to set the stop hour, beep / melody and volume. 6. The motion alarm will be on automatically after setting. 16 RMR939PA English R7 16 10/20/04, 10:34 AM EN Press CLOCK or CLOCK ALARM at any time to exit the Motion Alarm Setting Mode. TURNING THE MOTION ALARM OFF Press any button on the clock to turn the motion alarm off. It will sound again when the remote motion sensor unit detects a motion again. SLEEP TIMER 2. Press the SOUND / SLEEP button to set the sleep timer to turn off after 120 90 60 30 15 or 0 minutes. When 0 minutes is selected the soothing sound will automatically turn off after a few seconds. You can choose 1 of 6 soothing sounds to play for a set time while you fall asleep: • Bird • Wind • River • Raindrop • Waterfall • Ocean Wave 3. Use the volume. or buttons to change the soothing sound 4. SOUND will flash on the LCD display to indicate that the sleep timer is activated. To select the soothing sound: To set the sleep timer and soothing sound volume: 1. Press and hold the SOUND / SLEEP button for 2 seconds when the soothing sound is on. The soothing sound number will flash. 1. Press the SOUND / SLEEP button once. The soothing sound will turn on and the sleep timer will display the last setting. 17 RMR939PA English R7 17 10/20/04, 10:34 AM EN NOTE You can also press the SNOOZE / LIGHT button to project the time and alarm status for 5 seconds. MOTION SENSOR (MSR939A) The motion sensor has a security / monitoring function. It can set off your motion alarm on the clock for 5 minutes and turn the backlight on for 10 seconds when it detects movement. or 2. Use the soothing sound. buttons to change the type of Data can be collected from up to 2 sensors. Additional sensor sold separately. 3. Press the SOUND / SLEEP button to confirm the setting. SETUP SENSOR 1. Slide the motion sensor battery door open. PROJECTION UNIT 2. Insert the batteries, matching the polarity (+ and -) as shown in the battery compartment. The projection unit can display both time and alarm status. To use this feature: • Slide the PROJECTION switch to ON to activate continuous projection. However, this function will not work unless the AC / DC adaptor is used. • Adjust the FOCUS knob to make the image clearer. • Adjust the IMAGE ROTATION knob to rotate the image clockwise or anti-clockwise. • Manually tilt the projection unit to position the image or press the 180° ROTATION button to reverse the image and turn it upside down. 18 OPTION Channel Channel 1-2. If you are using more than one sensor, select a different channel for each sensor. 3. Set the channel by sliding the CHANNEL switch to 1 or 2. The switch is located in the battery compartment. 18 RMR939PA English R7 SWITCH 4. Set the code by sliding the CODE switches to the same setting as the Code on the clock display. This enables the clock and motion sensor to interact with each other. 10/20/04, 10:34 AM You may need to experiment with various locations to get the best results. 6. Secure the sensor in the desired location using the wall mount or table stand. WAKE-UP VIBRATION ALARM - VR101A (OPTIONAL) 7. Twist the motion sensor knob to direct the sensor to the position you want. 8. Slide the POWER ON / OFF switch to turn the motion sensor ON or OFF. The vibrating alarm receives a signal from the clock and performs a wake-up function by vibrating. It is designed to go under your pillow. 9. Slide the ALARM SOUND ON / OFF switch to ON to activate the alarm sound function. The motion sensor alarm will now sound for 20 seconds if it detects movement. Slide to OFF to deactivate this function. The device has a range of roughly 50 feet and has an LED indicator to show data transmission and battery level. NOTE Once it has power, the motion sensor takes 2 minutes to warm up. The switch within the vibrating alarm can adjust to alarm 1 or alarm 2, or both. Simply select the alarm time on the clock unit when you want the vibrating alarm to wake you up. For best results: • Insert the batteries and select the channel before you mount the sensor. • Place the sensor out of direct sunlight and moisture. • Do not place the sensor more than 98 feet (30 meters) from the main (indoor) unit. • Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. • NOTE The vibrating alarm is powered by 2 x UM-3 / AA 1.5V batteries (included). It is also compatible with rechargeable batteries (not included). RESETTING THE CLOCK Insert a thin blunt instrument into the hole below RESET to return to the default settings. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. 19 RMR939PA English R7 19 10/20/04, 10:34 AM EN 5. Press the RESET button. Close the motion sensor battery compartment. EN The default settings are: • Do not tamper with the internal components. • Do not mix new and old batteries or batteries of different types. Clock Time: 12.00 PM Date: 1st January 2004 • Do not use rechargeable batteries with this product. Time Offset: -8 (Pacific Time) • Alarm 1 and 2 Time: 6.00 AM Remove the batteries if storing this product for a long period of time. Alarm Melody: #1 with low volume • Do not scratch the LCD display. Daily Alarms: Disabled Motion Alarm Start Time: 12.00 AM Motion Alarm Stop Time: 6.00 AM Motion Alarm: Disabled Display Setting: 12hr, MM / DD, °F NOTE The technical specification of this product and contents of this user manual are subject to change without notice. Images not drawn to scale. TROUBLESHOOTING WARNINGS This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. Observe the following guidelines: • Never immerse the product in water. This can cause electrical shock and damage the product. • Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity. PROBLEM SYMPTOM REMEDY Clock time is not correctly set. No atomic clock signal reception. Place the clock far away from PCs, phones, and other electronic equipment and near a windowsill. Wait for at least 24 hours. No alarm. Alarm does not sound. Turn on the alarm setting. 20 RMR939PA English R7 20 10/20/04, 10:34 AM ABOUT OREGON SCIENTIFIC STATEMENT OF RESPONSIBILITY Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads. Oregon Scientific will not be held liable for any bodily injury, death, property damages, or any other claims of whatever nature resulting from the misuse or negligence of the product, whether intentional or unintentional. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any approved alternations or repairs of the product. We hope you will find all the information you need on our website, however if you'd like to contact the Oregon Scientific Customer Care department directly, please visit: www2.oregonscientific.com/service/support OR Call 949-608-2848 in the US. For international enquiries, please visit: www2.oregonscientific.com/about/international/ default.asp 23 RMR939PA English R7 23 10/20/04, 10:34 AM EN NOTICES EN FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 24 RMR939PA English R7 24 10/20/04, 10:34 AM The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific.com), or on the warranty card for this product) for all inquiries instead. 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. We Name: Oregon Scientific, Inc. Address: 19861 SW 95th Place, Tualatin, Oregon 97062 USA Telephone No.: 1-800-853-8883 Fax No.: 1-503-684-3332 declare that the product Product No.: RMR939PA Product Name: POLERMO Projection Clock with Motion Alert Manufacturer: IDT Technology Limited Address: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong Kong 25 RMR939PA English R7 25 10/20/04, 10:34 AM EN is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: DECLARATION OF CONFORMITY © 2004 Oregon Scientific. All rights reserved. P/N: 000-000000-000 RMR939PA English Back R7 10/20/04, 10:34 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:10:20 10:34:57Z Modify Date : 2004:11:17 10:35:24+08:00 Page Count : 27 Creation Date : 2004:10:20 10:34:57Z Mod Date : 2004:11:17 10:35:24+08:00 Producer : Acrobat Distiller 5.0.2 for Macintosh Author : G4-5 Metadata Date : 2004:11:17 10:35:24+08:00 Creator : G4-5 Title : RMR939PA English R7 Has XFA : NoEXIF Metadata provided by EXIF.tools