IDT Technology RTGR328NA-01 Remote Thermo-Hygro meter w/ R/C Clock User Manual RAR186 1

Download:
Mirror Download [FCC.gov]
Document ID	424047
Application ID	518gN1OMkKnvDPDq3J4pmQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.17kB (164619 bits)
Date Submitted	2004-05-20 00:00:00
Date Available	2004-05-20 00:00:00
Creation Date	2004-02-27 14:15:37
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2004-03-04 16:33:25
Document Title	RAR186 1
Document Creator	Adobe PageMaker 6.52
Document Author:	G4

Select Temperature Unit ...................................... 10
Contents ................................................................... 1
Select Sensor Channel ........................................ 10
Introduction .............................................................. 2
Minimum / Maximum Records ............................. 11
About Oregon Scientific .......................................... 2
Temperature Trend .............................................. 11
Product Overview .................................................... 3
Backlight ................................................................. 11
Front View .............................................................. 3
Reset System ......................................................... 11
Back View .............................................................. 4
Safety and Care ...................................................... 11
Remote Sensor (THN122) ..................................... 5
Warnings ................................................................. 12
Getting Started ......................................................... 6
Batteries ................................................................. 6
Troubleshooting ..................................................... 12
Change Settings .................................................... 6
Specifications ......................................................... 13
Table Stand or Wall Mount ..................................... 6
Main Unit Dimensions .......................................... 13
Remote Sensor (THN122) ........................................ 6
Remote Sensor Dimensions ................................ 13
Setup Sensor ......................................................... 7
Temperature ......................................................... 13
Data Transmission ................................................. 8
Remote Sensor (THN122) ................................... 13
Search for Sensor .................................................. 8
Clock .................................................................... 13
Clock ......................................................................... 8
Power ................................................................... 13
Turn Atomic Clock ON/OFF ................................... 9
FCC Statement ....................................................... 14
Set Clock ............................................................... 9
Switch Clock Display ............................................. 9
Alarm ......................................................................... 9
View Alarm Settings ............................................... 9
Set Alarm ............................................................... 9
Activate Alarm ...................................................... 10
Snooze Alarm ...................................................... 10
EN
Temperature ............................................................ 10
CONTENTS
EN
INTRODUCTION
ABOUT OREGON SCIENTIFIC
TM
Thank you for selecting the Oregon Scientific Wireless
Thermo Clock (RAR186). This device bundles precise time
keeping, alarm, and temperature monitoring features into a
single tool you can use from the convenience of your home.
Visit our website (www.oregonscientific.com) to learn
more about other Oregon Scientific products such as
digital cameras, hand-held organizers, health and fitness
gear, and projection clocks. The website also includes
contact information for our customer service department,
in case you need to reach us.
In this box, you will find:
• Main unit
• Remote sensor (THN122)
Keep this manual handy as you use your new product.
It contains practical step-by-step instructions, as well
as technical specifications and warnings you should
know.
EN
PRODUCT OVERVIEW
FRONT VIEW
1.
Sensor Temperature Area: Readings, trend line,
sensor reception status and channel number
2.
Indoor Temperature Area: Readings, and indoor
symbol
3.
Clock Area: Time display with seconds or days of
the week
4.
Calendar / Alarm Area: Date display and dual alarm
display
5.
MODE: Press to change display / settings
6.
MEM: Press to view current or saved max / min
temperature
7.
CHANNEL: Press to switch remote sensor
8.
((.)): Press to view dual alarm settings
TEMP
MODE
MEM
CHANNEL
EN
BACK VIEW
1.
Wall mount
2.
°C / °F Switch
3.
Alarm (On / Off)
4.
Press (up button) to increase or (down button) to
decrease settings
5.
Battery compartment
6.
Catch to open battery compartment
7.
Table stand
EN
REMOTE SENSOR (THN122)
1.
1.
LED Status indicator
Wall mount hole
2.
RESET
3.
Channel number (1 - 3)
4.
Battery compartment
(Battery compartment cover not shown)
EN
GETTING STARTED
TABLE STAND OR WALL MOUNT
BATTERIES
Product can stand on detachable base or be mounted
on a wall with a nail.
Batteries are not supplied with this product. You will need
to purchase 2 x UM-3 (AA) 1.5V alkaline batteries for
the main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteries
for the remote sensor.
Insert batteries before first use, matching the polarity as
shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press RESET after each battery change.
NOTE Do not use rechargeable batteries.
shows on LCD display when batteries are low.
REMOTE SENSOR (THN122)
CHANGE SETTINGS
1.
2.
3.
This product is shipped with a THN122 Thermo Sensor
that collects Temperature data. Data can be collected
from up to 3 sensors. Additional sensors sold separately.
Press and hold MODE for 2 seconds to enter setting
mode.
Press UP or DOWN to change settings.
Press MODE to confirm.
• Insert the batteries and select the channel and
temperature unit before you mount the sensor.
Open the remote sensor battery compartment with a
small Phillips screwdriver.
1.
Insert the batteries, matching the polarity as shown
in the battery compartment.
2.
Set the channel. The switch is located in the battery
compartment.
• Place the sensor out of direct sunlight and
moisture.
• Do not place the sensor more than 30 meters
(98 feet) from the main (indoor) unit.
SWITCH
OPTION
• Position the sensor so that it faces the main
(indoor) unit, minimizing obstructions such as
doors, walls, and furniture.
Channel
Channel 1 - 3. If you are using
more than one sensor, select a
different channel for each sensor.
• Place the sensor in a location with a clear view
to the sky, away from metallic or electronic
objects.
3.
Place the sensor near the main unit. Press RESET
on the sensor to initiate signal sending between the
sensor and the main unit. The reception icon on
the main unit will blink for approximately 3 minutes
while it is searching for the sensor. (Refer to the
Sensor Data Transmission section for more
information.)
4.
Close the remote sensor battery compartment.
5.
Secure the sensor in the desired location using the
wall mount or table stand.
• Position the sensor close to the main unit
during cold winter months as below-freezing
temperatures may affect battery performance and
signal transmission.
You may need to experiment with various locations to
get the best results.
EN
For best results:
SETUP SENSOR
EN
DATA TRANSMISSION
CLOCK
Data is sent from the sensor(s) every 30 seconds.
The reception icon shown in the Temperature Area
shows the status.
This product shows the current time, time zone, and day
of week in English, German, Italian, or French.
ICON
--- shows in Temp
Areas
DESCRIPTION
Main unit is searching for
sensors.
At least 1 channel has
been found.
Channel 1 is selected (number
will change depending on the
sensor you select)
Manually set the clock following the "Set Clock"
instructions (below).
1.
Press and hold MODE for 2 seconds. The Clock
Area will blink.
The selected sensor cannot
be found. Search for the
sensor or check batteries.
2.
Select the hour, minute, date, month, language, day
and time zone offset (-12 to +12). Press UP or
DOWN to change the setting. Press MODE to
confirm.
SET CLOCK
SEARCH FOR SENSOR
NOTE The Language settings are (E) English, (D)
German, (F) French, and (I) Italian
To search for a sensor, press and hold MEM and
CHANNEL for 2 seconds.
SWITCH CLOCK & CALENDAR DISPLAY
NOTE If the sensor is still not found, check the
batteries, obstructions, and remote unit location.
NOTE Signals from household devices such as
doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product performance.
The reception will resume once the interference ends.
Clock with Weekday, Clock with Weekday and Zone
Time, and Clock with Weekday and Zone Calendar.
EN
ALARM
TEMPERATURE
This product is equipped with a 2-minute crescendo alarm.
This product can display the following temperature
information:
VIEW ALARM SETTINGS
• Current, minimum and maximum readings
The Alarm Time and On / Off status will show in the
Calendar / Alarm Area.
• Trend line for remote sensor
Press ((.)) again for the second alarm time and status.
Data is collected by the remote sensors and displayed
every 30 seconds.
SET DUAL ALARM
1.
Press ((.)).
2.
Press and hold ((.)) again for 2 seconds. The Alarm
settings will blink.
3.
Select the hour and minute. Press UP or DOWN to
change settings. Press ((.)) to confirm.
SELECT TEMPERATURE UNIT
Slide the °C / °F switch into the desired location. The
switch is located on the back of the product.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 3.
NOTE To set second alarm perform step 1 twice,
then perform steps 2 and 3.
The icon shows the selected sensor.
ACTIVATE ALARM
Kineticwave
Icon
Press ALARM ON / OFF to activate, deactivate and toggle
between alarm settings. (Alarm symbol with #1 or #2)
shows in Calendar / Alarm Area when alarm(s) are
activated.
Designated
Display
Remote
Display
Channel 1
Remote
Display
Channel 2
Remote
Display
Channel 3
EN
MINIMUM / MAXIMUM RECORDS
SAFETY AND CARE
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the indoor reading and
the selected sensor. To clear both the indoor
thermometer and selected sensor records, press and
hold MEM for 2 seconds.
Clean the product with a slightly damp cloth and alcoholfree mild detergent. Avoid dropping the product or placing
it in a high-traffic location.
A beep will sound to confirm that the memory has been
cleared.
WARNINGS
This product is designed to give you years of service if
handled properly. Observe the following guidelines:
TEMPERATURE TREND
The trend line is shown next to the Temperature reading.
Trend
Rising
Steady
• Never immerse the product in water. This can
cause electrical shock and damage the product.
Falling
• Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
ICON
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
RESET SYSTEM
• Do not use rechargeable batteries with this
product.
The RESET buttons are located in the battery
compartments for the main unit and sensors. Press
RESET when you change the batteries and whenever
performance is not behaving as expected (for example,
unable to establish radio frequency link with remote
sensor.
• Remove the batteries if storing this product for a
long period of time.
• Do not scratch the LCD display.
Do not make any changes or modifications to this
product. Unauthorized changes may void your right to
use the product. The technical specification of this
product and contents of this user guide are subject to
change without notice. Images not drawn to scale.
NOTE When you press RESET, all settings will return
to default value, and you will lose all stored information.
10
EN
TROUBLESHOOTING
REMOTE SENSOR DIMENSIONS
Check here before contacting our customer service
department.
LxWxH
92 x 60 x 20 mm
(3.6 x 2.4 x .79 inches)
Weight
2.22 ounces without battery
Problem
Symptom
Remedy
Calendar
Strange date / Change language
( 9)
month
Clock
Cannot adjust Set Clock
clock
( 9)
Indoor Range
-5 °C to 50 °C
(23 °F to 122 °F)
Temp
Shows "LLL"
or "HHH"
Temperature is out-ofrange
Outdoor Range
-20 °C to 60 °C
(-4 °F to 140 °F)
Remote
sensor
Cannot locate
remote
sensor
Cannot
change
channel
Check batteries (
Resolution
0.1 °C (0.2° F)
Memory
Min / Max
Check location (
TEMPERATURE
Unit
6)
6)
Check sensors. Only
one sensor is
working( 7)
°C or °F
REMOTE SENSOR (THN122)
RF frequency
433 MHz
Range
SPECIFICATIONS
MAIN UNIT DIMENSIONS
30 meters (98 feet)
with no obstructions
Transmission
every 30 seconds
Channel No.
1-3
Unit
°C or °F
LxWxH
150 x 82 x 47 mm
(5.9 x 3.2 x 1.9 inches)
CLOCK
Weight
7.90 ounces with battery
Clock display
HH:MM:SS
Hour format
12hr AM/PM
11
EN
Time zone offset
-12 to +12 hours
Calendar
DD/MM; weekday in
4 languages (E, F, D, I)
Alarm
2-minute crescendo
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
POWER
Main unit batteries
2 x UM-3 (AA) 1.5V
alkaline
Sensor batteries
2 x UM-4 (AAA) 1.5V
alkaline
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
DECLARATION OF CONFORMITY
The information below is not to be used as contact for
support or sales. Please call our customer service number
(listed on our website at www.oregonscientific.com, or on
the warranty card for this product) for all inquiries instead.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
12
EN
We
Name:
Oregon Scientific, Inc.
Address:
19861 SW 95th Place,
Tualatin, Oregon 97062 USA
Telephone No.:
1-800-853-8883
Fax No.:
1-503-684-8883
declare that the product
Product No.:
RAR186
Product Name:
Remote Thermo Clock
Manufacturer:
IDT Technology Limited
Address:
Block C, 9/F, Kaiser Estate,
Phase 1, 41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1)
This device may not cause harmful
interference.
2)
This device must accept any interference
received, including interference that may
cause undesired operation.
13
EN
Wireless Thermo Clock
Model : RAR186
User Manual
14
EN
© 2004 Oregon Scientific. All rights reserved.
P/N.: 086-003347-02
15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2004:02:27 14:15:37Z
Subject                         : RAR186 1
Modify Date                     : 2004:03:04 16:33:25+08:00
Page Count                      : 15
Creation Date                   : 2004:02:27 14:15:37Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Keywords                        : 
Author                          : G4
Mod Date                        : 2004:03:04 16:33:25+08:00
Metadata Date                   : 2004:03:04 16:33:25+08:00
Description                     : RAR186 1
Title                           : RAR186 1
Creator                         : G4

EXIF Metadata provided by EXIF.tools