User manual
Wireless M2M Router iR700B Delivery Specification Version 1.4 Systena America, Inc. iR700B Delivery Specification 1. Scope This specification document applies to the wireless M2M router (model name: iR700B series) delivered by IDY Co., Ltd. (Eye-Dee-Why). 2. Overview This product is a 4G-WiFi wireless M2M router for business using 4G wireless communications modules such as LTE and WiMAX2+, as well as 3G and PHS wireless communication module. By using mini PCI-Express card slot for the internal interface, it is possible to equip with every type of wireless WAN certified communications module, including 4G LTE, WiMAX2 +, 3G HSPA, and PHS. The list of available communications modules includes not only full and half-size mini PCI-Express cards, but through the use of a conversion adapter, M.2 (NGFF) standard modules can be installed as well. Also, by equipping with RS232/RS485 interface compliant serial data D+/D- terminal, WiFi, and Ethernet, you can connect the router directly to existing equipment. 3. Constitution This product will be configured as follows. 1) iR700B Main Body 2) Wireless WAN communication module (* 1) a. This will be built into Main Body at our factory. 3) Antenna a. Antenna for WiFi x 1 b. Wireless WAN antenna (* 2) 4) AC adapter 5) Rubber foot x 4 (*1) Wireless WAN communication module can accommodate selection of communication network in accordance with your application. Router is compatible with both full and half-size cards. The customer must provide the SIM card for the communications module. Please contact us to request our recommendation of SIM cards. (*2) Depending on communications card, 1 or 2 Wireless WAN antennae may be required. The included antennae are certified as a set with the communications module. Please be sure to use with the included antennae. -1SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 4. Specification Item Remarks Specifications CPU:MIPS24KEc (580MHz) Remarks RALINK MT7620A SPI FLASH:8MB DDR2 SDRAM:64MB LED display WiFi LED upper x1 green wireless LAN status display WiFi LED low r x1 blue / red for extension (not used) WWAN LED upper x1 green wireless WAN status display WWAN LED low r x1 blue / red wireless WAN receiving electric field intensity STAT LED x1 orange body status display PWR LED x1 green power indicator LAN/WANx1, LANx3 green wired LAN status display LTE ASKEY module Each communication module is certified. Telit module Please refer to the attachment for a detailed display Wireless WAN specification of the communication module, 3G ASKEY module such as support band. u-blox AG module Model number is different for each module. Telit module PHS ABIT Corporation module WiMAX2+ Shinsei Corporation module WiFi IEEE802.11b/g/n(1T1R) construction design certification (TELEC) acquired Security SSIDx2 (standard) can be up to eight by the options No security encryption WPA encryption scheme WPA TKIP、AES、authentication method: PSK WPA2 WPA2 encryption scheme WPA/WPA2 TKIP、AES、TKIP/AES、authentication SSID notification (enable / disable) MAC address filtering method: PSK WPA/WPA2 encryption method TKIP、AES、TKIP/AES、authentication method: PSK Router function address translation NAT,NAPT(IP masquerade) Firewall function Port forwarding, virtual DMZ Dynamic DNS DDNS WWAN monitoring LTE Monitoring method is different by each function 3G communication module. PHS WiMAX2+ -2SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification Item Specifications Remarks Front USB USB2.0 Host(High-Speed USB compatible) Interface Micro SD SDHC/SDXC compatible Reset button The body of the reset and initialized (factory) during use Rear DC 5V jack Connect the AC adapter of the body attached interface RS232 / 485 (silver RJ-45) x 1 Use the option of a dedicated conversion cable (RJ-45 to D-sub 9-pin conversion cable) It can be used as a RS232C or RS485 LAN / WAN combination, LAN dedicated port 4 ports can be used as LAN or 3 ports can be (Black RJ-45) x 4 used as LAN and 1 port can be used as WAN. DIOx1 By customizing the software of external devices data input, it can be used for the output of the control signal. Mode button By customizing the software, it can be used as any of the function buttons. Side For wireless WAN antenna Depending on the number of antennas is 1 or interface SMA connector (Receptacle / Normal-Type) 2. * Waterproof external antenna options are available. SMA connector for WiFi antenna (Receptacle / 2.4GHz support of WiFi antenna Reverse-Type) Bottom SIM slot x 1 Micro SIM interface * It becomes the inside of the screwing cover *Standard size SIM can be available as an option DC 5V power input Rated voltage DC 5V ± 5% (@ load current 0 ~ More than DC5.5V voltage (overshoot, 3.0A) that surge, etc.) is not applied. ripple voltage not more than 200mVp-p AC adapter Input: AC100V-240V, 50 / 60Hz PSE acquisition Output: DC5V 3A Power consumption Operation: 5W (max) During use of Wireless WAN, WiFi, WAN, or LAN, It will differ by each communication module. External dimensions vertical 76x horizontal 121x high 25 (mm) excluding protrusions Mass 275g A communication module is not included. Operating 0 ℃ ~ 50 ℃ (body) AC adapter is not included. temperature range Storage -20 ℃ ~ 70 ℃ temperature range Humidity range 10% to 95% (with no condensation) *Please contact us for information about customizing the software. -3SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 5. External view - Overall Appearance - - Front View - - Rear View - -4SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification - Right View – - Left View - - Top View - -5SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification - Bottom View - -6SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 6. Packaging Specification 6-1. Carton Composition Packaging Specification Overview PAPER BOARD BOX (10SET) PAPER BOARD Paper Board: 2 Pcs (435x330x7mm) Box Size: 10 Pcs (220x175x65mm) Carton Size: 1 Pcs (460x360x230mm) Total Weight: 7.6Kg (Ref.) CARTON -7SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 6-2. SHIPPING MARK Our company’s standard SHIPPING MARK is stamped on the outer carton. If you have a specific request [for markings], please inform us when placing your order. Side Items Marking Note Shipping Carton No. C/NO: n-mmth item in master carton Mark . (Printed on carton, or written on label.) Country of MADE IN XXXXX Manufacture Country of Manufacture is sometimes changed. (Printed on carton, or written on label.) Care Mark Product Name MODEL: iR700B (Printed on carton, or written Quantity QTY : 10 PCS Total Weight G.W. : (10pcs/7.6kg) Carton MEAS: 46 X 23 X 36 cm on label.) Dimensions -8SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 7. Label Specification Below is the explanation of the product label on the bottom surface of the main body. 7-1.S/N: Serial Number Serial Numbers are assigned according to the code below. 0 B 2 5 0 0 0 0 0 0 0 0 1 Product Serial Number (000001 - 999999) Model Number (00 - 99) Factory Number (0 - 9) Day of Producted Date (0 - 31) Month of Producted Date (1 - C) A:Oct, B:Nov, C:Dec End Digit of A.D. (0 - 9) (*1) Model Number:11 (11 is for iR700B standard model. For customized models, a different number is allocated.) (*2) Factory ID: Fixed as 0. -9SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 7-2.Ethernet MAC:MAC address Device is shipped with IDY MAC(1C:06:56:xx:xx:xx). If you need a specific MAC address, please provide it when placing your order. 7-3.WiFi MAC:MAC address Device is shipped with IDY MAC(1C:06:56:xx:xx:xx). If you need a specific MAC address, please provide it when placing your order. 7-3.WiFi Manufacture Design Certification Number For this product, it is “208-140077”. 7-4.Manufacture Design Certification Number for Wireless WAN Communications Module For type with Wireless WAN Communications Module: Displayed on communications module inside main body For type without Wireless WAN Communications Module: No Manufacture Design Certification Number. -10SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification 8. Shipping Inspection Test Environment:Temperature 15~30°C, Humidity 50~80% RH Power setting: Voltage 5V±5%, Current limit depends on Communications module (*) Product condition: SIM card, WiFi/WWAN Antenna equipped 8-1.Inspection Items Category Item Inspection Detail Judgment Criteria Power-up Initial Power-up After feeding power, device able to power up. LED Display WiFi LED Upper Green: Blinks 20 seconds after feeding power WiFi LED Lower Blue: Illuminated up to 15 seconds after feeding power. Red: WWAN LED Upper Green: Illuminated 20 seconds after feeding power. WWAN LED Lower Blue: Illuminated up to 15 seconds after feeding power. Electrical Inspection Red: STAT LED Orange: Illuminated 15 to 60 seconds after feeding power. PWR LED Green: Illuminated while feeding power. LAN/WAN, LAN x 3 Green: Illuminated by LAN cable connection with PC. WiFi Wifi Connection Able to connect to PC via Wifi WWAN SIM Card Able to read SIM phone number. Communication Main Body-Communications between Comm. Modules: Able to Module read IMEI Coaxial connection: No anomalies when checking RSSI values on Live Network USB USB Memory Able to Write/Read to connected USB drive Access Micro SD Micro SD Card Able to Write/Read to inserted Micro SD Access AC Adapter Power Transmission Able to connect to iR700B main body & operate. FW Version Read via Inspection Tool Has correct Firmware MAC Address (WLAN/LAN/WAN) Read via Inspection Tool Correct value/No duplication IMEI Check While checking Comm. Correct value Module -11SYSTENA AMERICA INC. CONFIDENTIAL External Appearance iR700B Delivery Specification Shape Dents, Welds Per our external appearance external appearance external appearance standards Scratches Length, Depth Per our standards Printing Stains, Fading Per our standards *Current consumption limit value differs based on Communications module. Example: ASKEY Computer Corporation LTE module : 1000mA Shinsei Corporation WMAX/WIMAX2+ module: 1500mA -12SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification Exhibit.1 iR700B-WW Product Composition Chart Included Items Model No. Qty Notes iR700B Main Body iR700B-WW LTE Antenna W50-S-V3-I WiFi Antenna AN2400-5510RS AC Adapter SWI18-5-N DOE Level 6, 5V 3A LTE Communications Telit LN930 Built into the iR700B Main Body Module -13SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification Exhibit.2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. -14SYSTENA AMERICA INC. CONFIDENTIAL iR700B Delivery Specification Exhibit.3 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. -15SYSTENA AMERICA INC. CONFIDENTIAL Contact Us Systena America, Inc. 1660 S. Amphlett Blvd., Suite 114 TEL: +1 (650) 346-6531
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 17 Language : ja-JP Tagged PDF : Yes Author : "IDY Yosuke Nakayama"EXIF Metadata provided by EXIF.toolsCreator : Microsoft® Word 2010 Create Date : 2016:04:06 16:05:16+09:00 Modify Date : 2016:04:06 16:05:16+09:00 Producer : Microsoft® Word 2010