INFOMARK IF-W515C IF-W515C User Manual

INFOMARK CO., LTD IF-W515C

User Manual

To get started with Spacetalk:1 Install an activated Telstra® nano-SIM into your Spacetalk GPS Smartwatch/Phone by following the detailed instructions in this guide. The Telstra® plan should include voice calls, SMS and at least 200MB of data per month. (For a list of recommended plans, visit www.allmytribe.com/support.)2 Turn on the watch by holding down the power button for a few seconds until the screen turns on. If necessary, charge your Spacetalk using the supplied charging dock.3 Download the AllMyTribe smartphone app onto your iOS® or Android™ phone. If you’re a new user, tap “Sign Up” and follow the prompts to create a new account.4 In the AllMyTribe app, select “Add Device” and follow the prompts to add the Spacetalk to your AllMyTribe account.5 Spacetalk needs a valid AllMyTribe in-app subscrip-tion, so go ahead and get one now through the AllMyTribe app. Congratulations! Your new Spacetalk GPS Smartwatch/Phone is now ready to use. For help with any of these steps or further support, visit www.allmytribe.com/support. Software made in Australia. Watch made in China.TM and © 2017 AllMyTribe Pty. Ltd.Telstra® is a registered trademark of Telstra Corporation Limited.Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.Android, Google Play and the Google Play logo are trademarks of Google Inc.IOS is a trademark or registered trademark of Cisco in the U.S. and other countriesGPS SmartwatchIF-W515CMG001 Spacetalk Smartwatch User Manual_V7.indd 1 11/4/2017 3:22:40 PM
CorrectIncorrectWelcome to the tribeYour new Spacetalk GPS Smartwatch/ Phone helps keep your child safe by tracking their location, and allows you to call them and send SMS messages. Automatic safety alerts can be sent when your child has (or hasn’t) arrived at school, home, a bus stop, or any other safe place.If your child is ever in danger, they can press and hold the SOS button on their Spacetalk. The watch will start calling emergency contacts in its address book, and you will immediately be notified by SMS and through the AllMyTribe app.All your data is safely stored in Australia under a high level of security. If you have any concerns, AllMyTribe provides 24/7 complimentary Australian based customer service ready to help you.Get to know your Spacetalk Installing the SIM cardSOS ButtonPress to go back. Press and hold when in danger to activate SOS Mode.SpeakerYou can adjust the speaker volume while on a call.MicrophoneWhen making a call, hold the watch about 30cm from your mouth and talk normally.Water ResistantSpacetalk is water resistant, but don’t immerse the watch in water or take it swimming.Power ButtonPress to go to menu. Press and hold to turn Spacetalk on or o.Charging DockTo charge, connect the small end of the supplied cable to the dock, and the other end to a USB power source such as a computer. Then, place the watch onto the dock. Magnets will hold the two together.1. Turn over the watch and use your fingernail to open the plastic SIM card panel.2. Slide the metal SIM card cover to the left to unlock it. Open the cover by lifting its edge.3. Insert a Telstra® nano-SIM into the tray with the metal contacts on the SIM card facing down.4. Close the metal SIM card cover and lock it by sliding it to the right.5. Replace the plastic panel on the watch by snapping it into place.Your SIM is in!MG001 Spacetalk Smartwatch User Manual_V7.indd 2 11/4/2017 3:22:42 PM
SARSpecific Absorption Rate (SAR) information:This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smartwatch (FCC ID: 2AP6MIF-W515C) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10 mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu