User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3947105 |
| Application ID | Fg8MirTwy1xWVypdyHUUMA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 57.72kB (721525 bits) |
| Date Submitted | 2018-08-01 00:00:00 |
| Date Available | 2018-08-01 00:00:00 |
| Creation Date | 2017-04-11 15:22:40 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-07-26 16:34:42 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2017 (Windows) |
To get started with Spacetalk: 1 Install an activated Telstra® nano-SIM into your Spacetalk GPS Smartwatch/Phone by following the detailed instructions in this guide. The Telstra® plan should include voice calls, SMS and at least 200MB of data per month. (For a list of recommended plans, visit www.allmytribe.com/support.) 2 Turn on the watch by holding down the power button for a few seconds until the screen turns on. If necessary, charge your Spacetalk using the supplied charging dock. 3 Download the AllMyTribe smartphone app onto your iOS® or Android™ phone. If you’re a new user, tap “Sign Up” and follow the prompts to create a new account. 4 In the AllMyTribe app, select “Add Device” and follow the prompts to add the Spacetalk to your AllMyTribe account. 5 Spacetalk needs a valid AllMyTribe in-app subscription, so go ahead and get one now through the AllMyTribe app. Congratulations! Your new Spacetalk GPS Smartwatch/Phone is now ready to use. For help with any of these steps or further support, visit www.allmytribe.com/support. MG001 Spacetalk Smartwatch User Manual_V7.indd 1 Software made in Australia. Watch made in China. TM and © 2017 AllMyTribe Pty. Ltd. Telstra® is a registered trademark of Telstra Corporation Limited. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google Play and the Google Play logo are trademarks of Google Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries GPS Smartwatch IF-W515C 11/4/2017 3:22:40 PM Welcome to the tribe Get to know your Spacetalk Your new Spacetalk GPS Smartwatch/ Phone helps keep your child safe by tracking their location, and allows you to call them and send SMS messages. SOS Button Press to go back. Press and hold when in danger to activate SOS Mode. Installing the SIM card Speaker You can adjust the speaker volume while on a call. Automatic safety alerts can be sent when your child has (or hasn’t) arrived at school, home, a bus stop, or any other safe place. If your child is ever in danger, they can press and hold the SOS button on their Spacetalk. The watch will start calling emergency contacts in its address book, and you will immediately be notified by SMS and through the AllMyTribe app. All your data is safely stored in Australia under a high level of security. If you have any concerns, AllMyTribe provides 24/7 complimentary Australian based customer service ready to help you. 2. Slide the metal SIM card cover to the left to unlock it. Open the cover by lifting its edge. Microphone When making a call, hold the watch about 30cm from your mouth and talk normally. Power Button Press to go to menu. Press and hold to turn Spacetalk on or off. 3. Insert a Telstra® nano-SIM into the tray with the metal contacts on the SIM card facing down. Incorrect Correct Charging Dock To charge, connect the small end of the supplied cable to the dock, and the other end to a USB power source such as a computer. Then, place the watch onto the dock. Magnets will hold the two together. Water Resistant Spacetalk is water resistant, but don’t immerse the watch in water or take it swimming. MG001 Spacetalk Smartwatch User Manual_V7.indd 2 1. Turn over the watch and use your fingernail to open the plastic SIM card panel. 4. Close the metal SIM card cover and lock it by sliding it to the right. 5. Replace the plastic panel on the watch by snapping it into place. Your SIM is in! 11/4/2017 3:22:42 PM SAR Specific Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smartwatch (FCC ID: 2AP6MIF-W515C) has also been tested against this SAR limit. This device was tested for typical bodyworn operations with the back of the phone kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10 mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Create Date : 2017:04:11 15:22:40+09:30 Metadata Date : 2018:07:26 16:34:42+08:00 Modify Date : 2018:07:26 16:34:42+08:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:9a62bf09-6dcf-478c-bb06-ea5fa5208334 Original Document ID : xmp.did:917e7bca-a3f8-45d8-9f6b-e30ba6de54b2 Document ID : xmp.id:59adb0e5-61c9-2840-b765-0c85ab357a74 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7b790500-3289-cf44-9d4b-266799a92f57 Derived From Document ID : xmp.did:f7241175-a702-d149-9e0e-cce80c09b1db Derived From Original Document ID: xmp.did:917e7bca-a3f8-45d8-9f6b-e30ba6de54b2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:04:11 15:22:40+09:30 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 3 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools