INNERTRON IT-132J001 Dual Band Booster User Manual

INNERTRON, INC Dual Band Booster Users Manual

Users Manual

Direct Connection Dual-Band Amplifier/Booster Installation and Operation manual Innertron, Inc. www.Innertron.com Best Call Direct Connection Dual-Band Amplifier / Booster Installation and Operation Manual Innertron, Inc. 96B 5L 663-4 Gojan-dong, Namdong-gu, Incheon-city 405-310 Korea Phone : +82-32-816-1456 / 1458 Fax : +82-32-816-1457 Mobile : +82-10-6602-6980 Website: www.innertron.com Email: sales@innertron.com Direct Connection Dual-Band Amplifier / Booster Installation and Operation Manual Congratulations on the purchase of our Best Call Cellular/PCS Booster! How it Works Best Call Direct Connection Dual-Band Amplifier / Booster has been developed to enhance the performance of cell phone in vehicle. Its advanced technology is designed to significantly improve voice and reduce disconnects and drop-outs. The amplifier works with one antenna : communicates with the cell site and one cable : connected to cell-phone. The antenna will collect the outside signal and send it through a cable to the booster. The signal is then boosted and sent through a cable to a cell-phone. Direct Connection Dual-Band Amplifier/Booster Kit Contents 1. Direct Connection Amplifier/Booster Unit 2. Magnet Dual-Band Monopole Antenna Unit 3. Cable 4. DC Plug-in Power Supply 5. Cable Wrench Installing your Best Call Booster 1. Antenna must be mounted a minimum distance of 50 cm (1.64ft) away from any person(s). 2. You may place your amplifier anywhere inside your vehicle (except as mentioned above). 3. The amplifier’s location should be easily accessible and mounted away from moving parts, excessive heat or moisture. 4. The exterior antenna must be mounted outside the vehicle and at a distance that can be reached from the supplied antenna cable.
Direct Connection Dual-Band Amplifier/Booster Installation and Operation manual Innertron, Inc. www.Innertron.com Installation Cautions 1. Use caution to avoid drilling through or near fuel lines or fuel tanks; brake lines; or electrical wiring. 2. Do not mount the amplifier or its associated wiring in a location that may interfere with the safe operation of the vehicle. Caution: Connection to the negative side with the positive lead will cause damage to the amplifier. Installation of In-Vehicle To meet the FCC Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user or nearby persons and the antenna.
NO. Parameter SpecificationFrequency Cellular : 824~849MHz1 Gain 10dB norminal 2 Channel Power 12dBm3 Flatness 4dB4 Moudlation CDMA Only Frequency Cellular : 869~894MHz5 Gain 10dB norminal *Downlink RF Power:-5dBm6 N.F. 4dB norminal7 Flatness 4dB8 Moudlation CDMA Only Frequency PCS : 1850~1910MHz9 Gain 10dB norminal10 Channel Power 12dBm11 Flatness 6.5dB12 Moudlation CDMA Only Frequency PCS : 1930~1990MHz13 Gain 10dB norminal*Downlink RF Power:-5dBm14 N.F. 4dB norminal15 Flatness 6.5dB16 Moudlation CDMA Only 17 Power Requirements 9V/600mA (Norminal) , 9V/2A (Max)18 Connectors SMA19 Dimensions 91x100x3220 Weight 0.50 kgDirect Connection Dual-Band Amplifier/Booster Technical Specifications
Notice Trademark R-tron is a registered trademark of R-tron Inc. Other products and company names mentioned here in this manual might be trademarks or trade names of their respective owners. Copyright Copyright © R-tron Inc. 2000-2010 All Rights Reserved Any reproduction, distribution, or revisions of any or all portions of this manual is prohibited without written permission from R-tron Inc. Notice This document describes the specifications, installation, and operation of the OTA repeater. Hardware and software mentioned in this document are subject to continuous development and improvement. Consequently, there may be minor discrepancies between the information in the document, performance, and design of the product. Specifications, dimensions, and other statements mentioned in this document are subject to change without notice. Questions or Comments Address: R-tron America Inc. 6402 College Boulevard, Overland Park, KS 66211 Phone: +1-913-344-9977, 1-888-31R-TRON Fax: +1-913-344-9988 E-mail: info@r-tronamerica.com Website: www.rtronamerica.com FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to The following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. RF Exposure Statement FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu