INNERTRON IT-132J001 Dual Band Booster User Manual
INNERTRON, INC Dual Band Booster Users Manual
Users Manual
Direct Connection Dual-Band Amplifier/Booster Installation and Operation manual
Innertron, Inc.
www.Innertron.com
Best Call
Direct Connection Dual-Band Amplifier / Booster
Installation and Operation Manual
Innertron, Inc.
96B 5L 663-4 Gojan-dong, Namdong-gu,
Incheon-city 405-310 Korea
Phone : +82-32-816-1456 / 1458
Fax : +82-32-816-1457
Mobile : +82-10-6602-6980
Website: www.innertron.com
Email: sales@innertron.com
Direct Connection Dual-Band Amplifier / Booster
Installation and Operation Manual
Congratulations on the purchase of our Best Call Cellular/PCS Booster!
How it Works
Best Call Direct Connection Dual-Band Amplifier / Booster has been developed to enhance the
performance of cell phone in vehicle. Its advanced technology is designed to significantly improve
voice and reduce disconnects and drop-outs. The amplifier works with one antenna : communicates
with the cell site and one cable : connected to cell-phone. The antenna will collect the outside signal
and send it through a cable to the booster. The signal is then boosted and sent through a cable to a
cell-phone.
Direct Connection Dual-Band Amplifier/Booster Kit Contents
1. Direct Connection Amplifier/Booster Unit
2. Magnet Dual-Band Monopole Antenna Unit
3. Cable
4. DC Plug-in Power Supply
5. Cable Wrench
Installing your Best Call Booster
1. Antenna must be mounted a minimum distance of 50 cm (1.64ft) away from any person(s).
2. You may place your amplifier anywhere inside your vehicle (except as mentioned above).
3. The amplifier’s location should be easily accessible and mounted away from moving parts,
excessive heat or moisture.
4. The exterior antenna must be mounted outside the vehicle and at a distance that can be
reached from the supplied antenna cable.
Direct Connection Dual-Band Amplifier/Booster Installation and Operation manual
Innertron, Inc.
www.Innertron.com
Installation Cautions
1. Use caution to avoid drilling through or near fuel lines or fuel tanks; brake lines; or electrical
wiring.
2. Do not mount the amplifier or its associated wiring in a location that may interfere with the
safe operation of the vehicle.
Caution: Connection to the negative side with the positive lead will cause damage to the amplifier.
Installation of In-Vehicle
To meet the FCC Exposure Guidelines, the antenna should be installed so there is at least 20 cm of
separation between the body of the user or nearby persons and the antenna.
NO. Parameter Specification
Frequency Cellular : 824~849MHz
1 Gain 10dB norminal
2 Channel Power 12dBm
3 Flatness 4dB
4 Moudlation CDMA Only
Frequency Cellular : 869~894MHz
5 Gain 10dB norminal *Downlink RF Power:-5dBm
6 N.F. 4dB norminal
7 Flatness 4dB
8 Moudlation CDMA Only
Frequency PCS : 1850~1910MHz
9 Gain 10dB norminal
10 Channel Power 12dBm
11 Flatness 6.5dB
12 Moudlation CDMA Only
Frequency PCS : 1930~1990MHz
13 Gain 10dB norminal*Downlink RF Power:-5dBm
14 N.F. 4dB norminal
15 Flatness 6.5dB
16 Moudlation CDMA Only
17 Power Requirements 9V/600mA (Norminal) , 9V/2A (Max)
18 Connectors SMA
19 Dimensions 91x100x32
20 Weight 0.50 kg
Direct Connection Dual-Band Amplifier/Booster Technical Specification
s
Notice
Trademark
R-tron is a registered trademark of R-tron Inc.
Other products and company names mentioned here in this manual might be trademarks or
trade names of their respective owners.
Copyright
Copyright © R-tron Inc. 2000-2010
All Rights Reserved
Any reproduction, distribution, or revisions of any or all portions of this manual is prohibited
without written permission from R-tron Inc.
Notice
This document describes the specifications, installation, and operation of the OTA repeater.
Hardware and software mentioned in this document are subject to continuous development
and improvement. Consequently, there may be minor discrepancies between the information
in the document, performance, and design of the product.
Specifications, dimensions, and other statements mentioned in this document are subject to
change without notice.
Questions or Comments
Address: R-tron America Inc. 6402 College Boulevard, Overland Park, KS 66211
Phone: +1-913-344-9977, 1-888-31R-TRON
Fax: +1-913-344-9988
E-mail: info@r-tronamerica.com
Website: www.rtronamerica.com
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to The following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) made to this device that are not
expressly approved by the manufacturer may void the user's authority to operate the
equipment.
RF Exposure Statement
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation
exposure limits set forth for an uncontrolled environment. This device and its antenna must
not be co-located or operating in conjunction with any other antenna or transmitter.