→ Search Icon Configuration Icon ← Recording Icon ← → Lock Icon → All Icon - Search Icon: Search Option. →❶ →❷ →❸ ❺ ❹ 1 : Control Panel 2 : Screen Partition Panel 3 : Pan/Tilt Control Panel 4 : Camera Selection Panel 5 : Audio Volume Control Bar 6 : Status Information Panel 22 ❻ - Configuration Icon: To change setup of program. - Lock Icon: Supports password lock function for Server security. - Recording Icon and All Icon: Record only certain channels – Enable users to manually select certain channels for recording. Record all channels – Click [All] icon and click [REC] icon to record all channels. 1-2 Screen Partition Panel Support 7 kinds of various screen partitions, full-screen and sequence rotation display mode etc. [Screen Partition Panel] 1-3 Pan/Tilt Control Panel Use of Pan/Tilt Camera, 1.Select correct [Receiver] protocol from [Configuration]. 2. Select the channel which is connected to Pan/Tilt camera. 3. Click various buttons from Pan/Tilt Control Panel to control camera. (Pan/Tilt/Zoom/Focus). Pan/Tilt Zoom/Focus Button 23 Ⅱ User Manual - Main Program 1-4 Camera Selection Panel Click specific channel from Camera Selection Panel to enlarge and view images. 1-5 Audio Volume Control Bar If Audio input is configured from [Configuration] - [General], audio volume can be controlled from Audio Volume Control Bar. Disk Full Internet(TCP) Conection CH No. Modem Conection CH No. 2 Configuration Configuration Folder consists of [General], [Channel], [Store], [Network], [Schedule], [Maintenance], [Event], [Receiver], [Video Out] and [User Management] sub-panels. Configuration is used for setting Resolution, Image Quality, Motion Detected Recording, I/O, Schedule, Pan/Tilt Receiver Protocol, Network IP setup, etc. 1-1 General 1-6 Status Information Panel Indicates number of connection from Internet( T C P ) & modem. Disk Full will be indicated in red color if there is no space left in HDD. Start Section - Auto Start: DVR program automatically executed when system is turned on. - Max size at starting: DVR Program is setup as the exact size of monitor resolution to prevent display of other programs. Exit Section Option: Only DVR program shuts down after closing DVR Program OR the complete system shuts down. (Computer Power OFF). 24 25 Ⅱ User Manual - Main Program Audio Input Setup the Gain of Audio Input. - AUD1 ~ AUD8 is gain control for Audio Input from Capture Board. Set the gain to minimum(0) when use of amplified mic. (e.g.: camera built-in mic) - Snd Card is audio volume control using Sound Card as output device. 2 Channel Video/Audio Setup - Setup Camera Input Type NTSC – Korea, USA, Japan, Australia(some region), North Amercia(some region) etc. PAL – Region excluding NTSC area(China, Europe, South America, etc.) - Channel Selection – Select channel for surveillance - Resolution Setup – Image Resolution Setup(320X240 OR 640X480) Channel(Caption) Input Insert description of camera surveillance area Caption Setup - Surveillance Mode – Setup to indicate channel number and camera surveillance area caption in Main Program. - Search Mode – Setup to indicate channel number and recorded time in Search Program. ※ Caption Font and Color Setup – Setup caption font & color of caption according to channel number, camera surveillance area, recorded time etc. ※ Video Source – Setup Brightness, Contrast, Hue, Saturation and Sharpness. 26 27 Ⅱ User Manual - Main Program 2 Store 3 Network ※ Store Disk – Indicates installed HDD Capacity. Check(√) HDD to use as recording device Notice) Recommend to disable C Drive(Operating System installed) as recording device and use other drives(D, E, C). ※ Server Setup - Enable the Network Server: Setup System to be used as Internet Server. Server image can be viewed from remote Client Program OR Internet Web Browser by using private line connected to internet. ※ Overwrite – Setup overwrite to delete the oldest data when free HDD is lesser than minimum free space allowed. - Enable the Modem Server: Setup System to be used as PSTN Network Server. Server image can be viewed from remote Client Program by using modem connected through PSTN Network(Internet Web Browser not supported.). ※ Setup compression quality & max stored-frame per second. Recording size of 1 frame according to image quality & resolution is as followings: 28 Image Quality Resolution Recording Size(KB) Low 320X240 2.5 Low 640X480 Medium 320X240 3.7 Medium 640X480 10 High 320X240 5.0 High 640X480 15 ※ Watermark Use Watermark to prevent image tampering of every recorded frame. - Default: Watermark will be inserted as the word ‘ VR’. - User Define Mark: Watermark will be inserted as user defined word for easy identification or organization. ※ Network Information System IP Address & MAC Address - Direct connection to Server is possible from remote Client Program OR Internet Web Browser when use of Fixed IP. - Direct connection to Server is possible through DHS Server from remote Client Program by using DHS Service provided by our company when use of Dynamic IP. ※ User Limit - IP Router User: Check [User of Sharing IP] if DVR System is connected to internet using IP Router. - Register Dynamic IP User ID: ID must be registered to use DHS Service when use of Dynamic IP. Contact our company for more detailed information regarding Dynamic IP. 29 Ⅱ User Manual - Main Program 4 Schedule Recording Modes: Full Recording, Motion Detected Recording, Sensor Recording is possible for a specific date, time and channels. 5 System Auto Reboot Setup specific time to automatically reboot system. e.g.) Setup Recording Schedule for Monday 0~12 hour, Setup Motion Detection Recording Schedule for Tuesday 13~23 hour, Setup Sensor Recording Schedule for Wednesday 0~24 hour. 30 31 Ⅱ User Manual - Main Program 6 Event ※ Sensor Input - Check [Enable the Sensor] and configure the channel of camera and sensor input channel. ※ Enable Event Recording - Use Digital Output OR auto-recording when there is sensor input signal. 7 Receiver ※ Port Setup: Select serial port to use PAN/TILT Camera OR Receiver. ※ Device Type: Select protocol of receiver from Device Type Panel. 8 Video Out e.g.) Configure 1,2,3,4 Sensor Input for CH1 Camera & 5,6,7,8 Digital Output. Enable Event Recording & Warning Sound from speaker. ※ Motion Detection Motion Detection Area Setup, Motion Detection Sensitivity Setup Setup MD Area: Setup rectangular area in screen using the mouse. Motion Display: Indicate the specific area by changing color when motion is detected. Motion Recording: Record when there is movement in image 32 Video Out function can be used by Loop-Through to analog monitor. ※ Enable the TvOut Rotation : One channel can be viewed during the directed time gap or various selected channels can be viewed in timed sequence. ※ Single Mode : Only the selected one channel is viewed 33 Ⅱ User Manual - Search Program 9 User Management 02.Search Program Search Program allows users to search by time/date & play recorded images and audio. Support saving of still image by .bmp format, printing of still image, watermarked .bmp file of each image. User Managemet can give different authorization levels for management in accord to user IDs. Insert & Modify User Information Insert ID & Password and click [Modify User Information] icon to add new user. ※ 1-1 Control Panel Accessible local Functions Function to manage DVR System in installation site – Support setup for all the functions of DVR. ※ Serveillance Mode Icon Load Data Icon Accessible Network Functions Setup of only limited function is available for users connecting from outside using client program ※ Accessible Channels Direct only certain channels to be viewed according to user IDs. ※ 34 Save Icon → Watermark Viewer Icon Print Icon - Surveillance Mode Icon: Exit search program and converts to Survillance Mode(Main Program). - Load Data Icon: Open Calendar for loading data. 35 Ⅱ User Manual - Search Program Calendar 1-2 Playback Control Panel [Playback Control Panel] MD ONLY Icon: Load Motion Detected data only. LOAD Icon: Load data of selected date from calendar. - Save Icon: Save image of selected channels - Print Icon: Print image of selected channels using printer. Supports playback options: 1x, 4x playback, reverse playback, frame by frame playback. 1-3 Screen Partition Panel [Screen Partition Panel] Support 8 kinds of various screen partition display. 1-4 Data Search Process Bar Hour Button ← Minute Bar ← - Hour Button: Recorded data of selected hour is indicated in red color. - Minute Bar: Minute of recorded data is indicated 0~59min. and recorded data is indicated in red color. 1-5 Search Audio Volume Control Bar Control audio volume when replay of recorded data. Print Channel: Select channel for printing images. Option: Print image with caption OR goto printer setup. Print Type: Setup print layout Watermark Viewer Icon: Run Watermark Viewer. Watermark Viewer 36 Open saved .bmp file to check if there is any image tampering & check if watermark is identical with original image. 37