INTO TECH LIVE240 DVR BOARD User Manual USERS MANUAL 1

Download:
Mirror Download [FCC.gov]
Document ID	549766
Application ID	Lbd/E1/a3FAeOUUx0vel+Q==
Document Description	USERS MANUAL 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.24kB (1665479 bits)
Date Submitted	2005-06-09 00:00:00
Date Available	2005-06-06 00:00:00
Creation Date	2005-06-06 15:40:59
Producing Software	ezPDFGate with Acrobat Distiller
Document Lastmod	2005-06-06 15:41:16
Document Title	ÀÎÅõÅظŴº¾ó³»Áö72p-¿µ¹®
Document Author:	0

Contents
Ⅰ Installation Manual
1. Hardware Installation
2. Software Installation
Ⅱ User Manual
3. User Manual- Server
01. Main Program
02. Search Program
03. AVI Backup Manager
04. Backup Manager
4. User Manual- Client
01. NetClient Program
02. WebClient Program
※ Annex
Annex 1. I/O Device
Annex 2. Dynamic IP
Annex 3. IP Router
Ⅰ Installation manual - Hardware Installation
2. DVR Audio Installation
1. Hardware Installation
Please check contents before installation: DVR Board, Extension
Cable, Audio & PTZ Installation, etc., if you are missing any parts
please contact your local dealer.
2-1. Prepare DVR PC and MIC.
2-2. Connect the MIC to the Mainboard MIC Port of DVR PC OR
the Audio IN port on DVR Board. Please connect the Speaker to
the back panel of DVR PC.
1. DVR Board & Extension Cable Installation
1-1. Insert the DVR Board to an empty PCI Slot in DVR PC.




Either connect the MIC to Audio IN port of DVR Board OR Mainboard MIC port.

- H Board: Connect the 4CH MIC(B) to DVR Board(A) starting
from the left.

1-2. Use Extension Cable to connect cameras.
<4CH>




Ⅰ Installation manual - Hardware Installation
- HP Board: Connect the 8CH MIC(B) to DVR Board(A) starting
from the top.
3. P/T/Z Installation
3-1. P/T/Z Cable
[A] Cable : Connect to COM port of DVR PC
[B] Cable : Connect to DVR Board
[C] Cable : Connect to Receiver Cable
<8CH>




- RC Board: Connect the 4CH MIC(B) to DVR Board(A) starting
from the left.
4. Real Display(RD) Board Installation
4-1. Insert the Real Display Board into an empty PCI Slot in DVR PC.
4-2. Use Cable to connect Real Display Board with DVR Board.
<4CH>



Real Display Board cannot be used alone, it must be used with S, H, HPLUS

DVR Boards.
Ⅰ Installation manual - Software Installation
5. I/O Board Installation
1. Software Installation
5-1. Prepare Sensor, Alarm, I/O Board and I/O Extension Board for I/O
Board Installation.
< 8 port In/Out Connection>
4CH Input
5CH Output
You can install SmartDVR Software by using SmartDVR Formula CD
or downloading from INTOTECH website, www.intotech.co.kr.
Software CD consists of Server Package (Main program, WebClient
program, Apache HTTP Server program), Client Package (NetClient
program) & AVI Codec. User Manual is also available from SW CD.
[Main Program Installation]
I/O Extension Board

Insert SmartDVR Formula CD into CD-ROM drive or run
DvrSetup.exe file; the following installation screen will appear .
4CH Input
3CH Output

A : Industrial Case System can use In/Out port separately when additional
Back Panel is available.
< 16 port In/Out Connection>
To use 16 port In/Out,
A : Slave Board must remove jumper.
B : Master Board must install jumper.
Click the icon below and Main Program installation will
automatically proceed.
Installation Step : Apache HTTP Server (Web Server) ->
WebClient -> SmartDVR Formula


Ⅰ Installation manual - Software Installation
1. SmartDVR Apache HTTP Server (Web Server) Installation
1-1 Installation wizard tool will appear. Click [Next].
1-2 Read the License Agreement and if you agree to the
contents, select [I accept…] and click [Next].
1-3 Click [Next] after checking server information of Apache
HTTP Server.
1-4 Insert Network Domain, Server Name, Administrator’s
E-mail Address.
(This procedure is only a formality. In general cases, follow example)
Select [Run as a service for All Users – Recommended]
and click [Next].
10
11
Ⅰ Installation manual - Software Installation
12
1-5 Select Setup Type as [Complete] and click [Next].
1-7 After the setting is finished, click [Install] and start installation.
1-6 Click [Next] without change of setting. Note: Do not change
the directory!
1-8 After the installation is done, click [Finish].
13
Ⅰ Installation manual - Software Installation
1-9 After the installation is finished, a message confirming the
change of the Server port of Apache will appear.
2-2 Check the contents of License Agreement; if you agree to the
contents, click [Yes].
2 SmartDVR WebClient Installation
2-1 After the Installation Wizard Tool is appeared, click [Next].
2-3 After the installation is done, click [Finish].
14
15
Ⅰ Installation manual - Software Installation
3 SmartDVR Formula Installation
3-1 After Installation Wizard Tool is appeared, Click [Next].
3-2 Check the details of License Agreement; if you agree to the
contents, click [Yes].
16
3-3 After choosing [Destination Folder] for installation, click
[Next].
3-4 After the installation is done, click [Finish].
17
Ⅰ Installation manual - Software Installation
3-5 Driver Installation: Wizard automatically installs drivers
according to each board type.
5 NetClient Installation
5-1 After the Installation Wizard Tool is appeared, click [Next].
3-6 Reboot PC after all the installation.
4. SmartDVR Formula Uninstallation
4-1 Goto [Start] – [Control panel] and click [Add/Remove
Program].
4-2 Select [SmartDVR Formula] and click [Change/Remove].
5-2 After choosing [Destination Folder] for installation, click [Next].
Click the icon below and NetClient Program installation will proceed.
18
19

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:ba8e3760-c601-4a38-b077-31a0737babf7
Modify Date                     : 2005:06:06 15:41:16-04:00
Create Date                     : 2005:06:06 15:40:59-04:00
Metadata Date                   : 2005:06:06 15:41:16-04:00
Document ID                     : uuid:33197065-9f95-4a27-8d10-98f4f31f2787
Format                          : application/pdf
Title                           : ÀÎÅõÅظŴº¾ó³»Áö72p-¿µ¹®
Creator                         : QuarkXPress 3.3K: AdobePS 8.7.2 .6š
Author                          : 0
Producer                        : ezPDFGate with Acrobat Distiller