ION Audio ISP95 Wireless Stereo Speaker With Classic Car Design User Manual ISP95 SP827 User Manual
ION Audio, LLC Wireless Stereo Speaker With Classic Car Design ISP95 SP827 User Manual
User_Manual
ISP95 Bluetooth Stereo Speaker User’s Manual 1. Notice Before Using Thank you for purchasing MUSTANG STEREO. Please read this User's Manual completely before use. ISP95 designed for enjoy the high quality wireless music stream with a carriable size that based on the latest Bluetooth® wireless technology, it’s also built in FM/AM radio function. ISP95 can be easily connected to a mobile phone or other Bluetooth®‐enabled devices, such as Notebook PC, Tablets, iPod, etc., for music listening. ISP95 is compliant with Bluetooth v4.2 specification, supports A2DP and AVRCP profiles. For more details, please read the user guide following. 2. Specification Bluetooth specification: V4.2 Bluetooth operation frequency: 2.402‐2.48GHz Supported profile: A2DP, AVRCP Bluetooth Operation range: Up to 10 meters FM frequency range: 88~108MHz AM frequency range: 520~1710KHz Output power: 6W+6W Play time: 5 hours in maximum volume Charge time: 6 Hours Battery type: 2500mAh/7.4V, Rechargeable 3. ISP95 Bluetooth speaker overview ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ 11 12 13 ① Power Radio mode Play/Pause Previous Next BT mode BT mode Indicator FM mode indicator AM mode indicator AUX mode indicator Charging indicator AUX IN port Charging Port 4. Package contents list: 1) 2) 3) 4) 5) 6) ISP95 Bluetooth Speaker AC/DC adapter USB Charging Cable Audio Cable User Manual Quickstart Guide 5. Battery information The device is equipped with an integrated lithium‐ion battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging‐discharging cycles. Disconnect the ISP95 from the power supply as soon as the battery is fully charged. A charged battery will lose its capacity if it is not used regularly. Important: Ensure that the battery is fully charged if the device is going to be left unused for a long period of time. 6. Charging the battery Charge the battery completely before its first use. Read the section "Battery information" before start charging. 1) Use supplied USB cable and AC/DC adaptor to charge. 2) When the charger is connected to the speaker, the charging indicator will turn red. Charging the battery fully may take up to 6 hours. 3) When the battery is fully charged, the indicator light will turn green. Disconnect the charger from the speaker and the outlet. The speaker is ready to use. NOTE: ‐ Give your speaker a full charge before using for the first time. ‐ Supplied AC/DC adaptor can be a power supplier for playing while charging in Bluetooth mode. But it’s not recommended for radio mode. ‐ The fully charged battery has power for up to 5 hours music playing time in Bluetooth mode. When the battery power is low, the red indicator light starts to flash. 7. Turning on /off Turn on ISP95 ‐ ‐ Press POWER button for 3 seconds to turn on ISP95. The default mode is Bluetooth mode after powered on. If your speaker has been paired to a mobile phone, it will connect to the one last connected automatically when it’s turned on. Please ensure your phone's Bluetooth® function is active. Or else, the blue indicator starts to flash, it’s now in pairing mode. Refer to “Pair to your Bluetooth Phone” to get pairing done. Press RADIO button to enter radio mode and come back to Bluetooth mode by pressing BT button. Turn off ISP95 Press POWER button for 3 seconds to turn off your speaker, whatever which mode it is working. Note: To conserve power, ISP95 will turn off automatically if not connected to a device over 10 minutes in Bluetooth mode. 8. Pair to your Bluetooth® phone Before you use your speaker with Bluetooth connection the first time, you must pair the device with a Bluetooth® enabled mobile phone. Pairing is only required for the first connection with a Mobile phone. The ISP95 can connect to two mobile phones simultaneously. 1) While the “BT” indicator flashing after powered on or switch to Bluetooth mode by pressing Bluetooth button, enter the Bluetooth® setting of your mobile phone and start the search for Bluetooth® devices. (For further details, please read the operating instructions of your Mobile phone). 2) From the found devices list, select the "Mustang Stereo". 3) If required, enter the PIN code "0000" and confirm the entry. Once the pairing process is successful, the ISP95 will connect to mobile phone automatically then switch to standby mode, the indicator will keep blue. Note: If paring is not completed within 10 minutes, the speaker will turn off. If this happens, please repeat the paring steps. 9. Play music in Bluetooth mode Play/Pause Press PLAY/PAUSE button to play or pause the song. Increase/Decrease volume Wheel the volume knob to increase volume or decrease volume. Next/Previous song Press Next button to skip to next song, Press Previous button to skip to previous song. Note: The music will be paused automatically while a call is dialed out or incoming, and resume when the call has hanged up. 10. Using in Radio mode ISP95 is built‐in AM and FM radio function. Switch the AM or FM mode by pressing RADIO button, the indicator will light up accordingly. Wheel the tuning knob to turn the pointer towards to frequency mark on the panel, then fine tuning back and forth to get best receiving. Note: Depends on the strength of radio signal, you may need to change the location to get the better signal in house. 11. Using in external audio input ISP95 supports the AUX input for the wired external audio source connection. When the audio cable connected, ISP95 will switch to AUX mode. The green indicator lights up. ISP95 will return the last working mode when the audio cable is pulled out. 12. Safety and general information 1) 2) 3) 4) 5) 6) 7) Please read this User's Manual carefully and follow all instructions. To avoid any damage or malfunction of the device do not drop the device from high places. Keep device away from humidity, water and any other liquid. If the device is exposed to water, moisture and other liquids do not operate it to avoid any electrical shock, explosion and damage to the device or yourself. Do not place or keep this device near any heat sources, such as, direct sunlight, radiators, stoves or other apparatus that produce heat. This may cause an explosion, degrade the performance and/or reduce battery life. Do not modify, repair or disassemble device (Especially the battery). Doing this will void the warranty. Do not place heavy objects on the device. Use only the supplied and approved chargers. 8) 9) Unplug this device when unused for long periods of time or during lightning storms. The battery used in this device may present a risk of fire or chemical burn if mistreated. 13. FCC & IC Statement Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. 14. EC Declaration of Conformity Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). This declares that this product is in compliance with the essential requirements 10 and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland. 15. Warranty The condition of this warranty and supplier's responsibilities under this warranty are as follows: Warranty is non‐transferable and is limited to the original purchaser only. ‐ You must be able to prove the date of original purchase of the unit with a dated receipt. ‐ The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by an unauthorized third party. ‐ Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion. ‐ Specifically exempt from any warranty are limited‐life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. ‐ Supplier is not responsible, for failure resulting from accident, abuse, misuse, or any unauthorized repair, or modification. ‐ Modification and repair of the unit should be done by an authorized and qualified service center or returned to the manufacturer. 11 ‐ This warranty gives you specific legal rights, and you may also have other rights, which vary under local laws. FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Industry Canada’s licence‐exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 12 FCC VOC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. 13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2018:04:24 11:01:47+08:00 Modify Date : 2018:04:24 11:01:47+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Microsoft Word - ISP95_SP827_?User?Manual Creator : Administrator Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:07e9f83a-6b63-4d12-ad51-181276a82a92 Instance ID : uuid:050680fa-9fba-4dd8-9208-ce5e85cf17c2 Page Count : 13EXIF Metadata provided by EXIF.tools