IPAN IPAN IPN-WDCK Wireless Charger User Manual 15 IPN INT WDCK UserMan r1
IPAN IPAN Wireless Charger 15 IPN INT WDCK UserMan r1
15_IPN-INT-WDCK UserMan r1
User Manual
Thank you for buying wireless charging system IPN-INT-WDCK for
desk using . this product use QI wireless charging protocol and
compatible working with the mobile phone which have built-in QI
receiver .Details information pls refer to user manual as below .
FCC Notice
This device complies with part 15 of the FCC Rules Operation is
subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the part responsible for compliance could void the user’s authority to operate
the equipment.
FCC Radiation Exposure Statement
This equipment complied with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Read me first
Please read this manual before using the device to ensure safe
and proper use.
• Images may differ in appearance from the actual product.
Content is subject to change
without prior notice.
• Before using the wireless charger, make sure it is
compatible with your device.
Instructional icons
Warning: situations that could cause injury to yourself or
others
Caution: situations that could cause damage to your
device or other equipment
Notice: notes, usage tips, or additional information
Package content description
Check the product box for the following items:
• Power Bank
• Charging Tray (with AC/DC adapter)
• Wireless Charge mount
• Quick start guide
• The items supplied with the device and any
available accessories may vary depending on the
region or service provider.
• The supplied items are designed only for this
device and may not be compatible with other
devices.
• Appearances and specifications are subject to
change without prior notice.
• Use only mobile phone approved accessories.
Using unapproved accessories may cause the
performance problems and malfunctions that are
not covered by the warranty.
• Availability of all accessories is subject to change
depending entirely on manufacturing companies.
Using the power bank
Charging your power bank
Charging tray
1 Power on your charging tray.
Check AC/DC is plug to outlet power, and in the charging
tray.
2 Plug your power bank in the charging tray
• Rack the power bank in any slot
• Check red led blinks when charging on power bank.
3 Check power bank is charged
Check the power blank green led on still when charged,
with red led OFF. May take several hours for charge cycle
to completion
Charging your mobile device
Wireless charge mount
4Plug the power bank in the desk wireless charge mount,
lay down mobile device on charging surface.
Do not place foreign materials, such as metal objects, magnets,
and magnetic stripe cards, between the mobile device and the
wireless charger. The mobile device may not charge properly or
may be damaged due to overheating.
• Check power indicator on mobile device when charging.
5When the mobile device is charged, remove it from the
wireless charger.
Do not place foreign materials, such as metal objects, magnets,
and magnetic stripe cards, between the mobile device and the
wireless charger. The mobile device may not charge properly or
may be damaged due to overheating.
• When the mobile device is not placed on the charging surface
properly, or depending on the location of the mobile device’s
wireless charging coil, your mobile device may not charge
properly.
• Depending on the location of the mobile device’s wireless
charging coil, your mobile device may not charge properly.
• Wireless charging may not work properly if you have attached
a thick case to your mobile device. If your case is thick,
remove it before placing your mobile device on the wireless
charger.
• When a headset is connected to your mobile device, place
the mobile device in a landscape position on the wireless
charger. If you place the mobile device in a portrait position, it
may not charge.
• If you use the wireless charger in areas with weak network
signals, you may lose network reception.
• If you connect a charger to the mobile device during wireless
charging, the wireless charging feature will be unavailable.
• The wireless charger is compatible with Wireless Power
Consortium (WPC) certified devices.
• To save energy, unplug the charger when not in use. The
charger does not have a power switch, so you must unplug
the charger from the electric socket when not in use to avoid
wasting power. The charger should remain close to the
electric socket and be easily accessible while charging.
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.