IPAN IPAN IPN-WDCK Wireless Charger User Manual 15 IPN INT WDCK UserMan r1
IPAN IPAN Wireless Charger 15 IPN INT WDCK UserMan r1
15_IPN-INT-WDCK UserMan r1
User Manual Thank you for buying wireless charging system IPN-INT-WDCK for desk using . this product use QI wireless charging protocol and compatible working with the mobile phone which have built-in QI receiver .Details information pls refer to user manual as below . FCC Notice This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Read me first Please read this manual before using the device to ensure safe and proper use. • Images may differ in appearance from the actual product. Content is subject to change without prior notice. • Before using the wireless charger, make sure it is compatible with your device. Instructional icons Warning: situations that could cause injury to yourself or others Caution: situations that could cause damage to your device or other equipment Notice: notes, usage tips, or additional information Package content description Check the product box for the following items: • • • • Power Bank Charging Tray (with AC/DC adapter) Wireless Charge mount Quick start guide • • • • • The items supplied with the device and any available accessories may vary depending on the region or service provider. The supplied items are designed only for this device and may not be compatible with other devices. Appearances and specifications are subject to change without prior notice. Use only mobile phone approved accessories. Using unapproved accessories may cause the performance problems and malfunctions that are not covered by the warranty. Availability of all accessories is subject to change depending entirely on manufacturing companies. Using the power bank Charging your power bank Charging tray 1 Power on your charging tray. Check AC/DC is plug to outlet power, and in the charging tray. 2 Plug your power bank in the charging tray • • Rack the power bank in any slot Check red led blinks when charging on power bank. 3 Check power bank is charged Check the power blank green led on still when charged, with red led OFF. May take several hours for charge cycle to completion Charging your mobile device Wireless charge mount 4Plug the power bank in the desk wireless charge mount, lay down mobile device on charging surface. Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. The mobile device may not charge properly or may be damaged due to overheating. • Check power indicator on mobile device when charging. 5When the mobile device is charged, remove it from the wireless charger. Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. The mobile device may not charge properly or may be damaged due to overheating. • When the mobile device is not placed on the charging surface properly, or depending on the location of the mobile device’s wireless charging coil, your mobile device may not charge properly. • Depending on the location of the mobile device’s wireless charging coil, your mobile device may not charge properly. • Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the wireless charger. • When a headset is connected to your mobile device, place the mobile device in a landscape position on the wireless charger. If you place the mobile device in a portrait position, it may not charge. • If you use the wireless charger in areas with weak network signals, you may lose network reception. • If you connect a charger to the mobile device during wireless charging, the wireless charging feature will be unavailable. • The wireless charger is compatible with Wireless Power Consortium (WPC) certified devices. • To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and be easily accessible while charging. • The socket-outlet shall be installed near the equipment and shall be easily accessible.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Warning : Invalid secondary xref table Page Count : 9 Language : zh-CN Tagged PDF : Yes Author : Richard Amancio Creator : Microsoft® Office Word 2007 Create Date : 2018:05:04 01:43:09+08:00 Modify Date : 2018:05:04 01:43:09+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools