IR TEC HS1X0900 TRANS-HFD User Manual 058 10900 002 IM EN LMS 109
IR-TEC International Ltd. TRANS-HFD 058 10900 002 IM EN LMS 109
IR TEC >
Contents
- 1. User Manual (LMD-109).pdf
- 2. User Manual (LMD-509).pdf
- 3. User Manual (LMS-109).pdf
User Manual (LMS-109).pdf
OVERVIEW LMS-109 series Line Voltage Occupancy Sensor INSTALLATION INSTRUCTIONS APPLICATION NOTES The LMS-109 series is a line voltage occupancy sensor designed for OEM lighting fixture integration to provide occupancy sensing control. This occupancy sensor employs an advanced High Frequency Doppler (HFD) sensing technology to provide superior sensing performance of minor motion like typing, writing, or reading. The HFD technology operates with high frequency radio waves which are capable of detecting the occupant's presence and movements without requiring unobstructed line-of-sight like PIR sensors. Thus, the HFD sensor can detect through non-metallic material like plastic, glass, plywood or plaster board. Avoid placing the sensor in an area surrounded with metallic wall which may block or absorb the radio wave. If possible, place the sensor to the opening as close as possible. Fluorescent light may cause interference to the HFD sensor operation, and result in lighting permanent on. If possible, avoid placing the HFD sensor within 1m (3ft.) of fluorescent light. Avoid sensor placement facing doors, corridors or exits as HFD sensor may detect the traffics at adjacent area. The Accu-Set digitalized potentiometers make setting the sensor easier, faster and more accurate than conventional analog ones. 4 levels of sensitivity can be selected via DIP switch settings to provide different coverage. An exclusive Hybrid Switching technology makes the LMS-109 series perfect to control lighting with exceptionally high inrush current (HIC) during switching, such as multiple LED lights connected in parallel. The sensor comes with an ambient light sensor (ALS) to inhibit switching on the light if the ambient light level is higher than the threshold set. DIMENSIONS Indoor dry location use only Utilisation a L'interieur Uniquement 3.6mm (0.14”) CAUTION Risk of Electric Shock - Disconnect power supply before servicing. Open Type Photoelectric Switches. Install the sensor at least 1ft. away from any occupant. LMS-109 92mm (3.6”) 84mm (3.3”) PRUDENCE Risque de choc électrique - Débranchez l'alimentation avant l'entretien. Ouvrir Type commutateurs optoélectroniques. 43mm (1.69”) IR-TEC hereby declares that the LMS-109 complies with Directive 2014/53/EU issued by the Commission of the European Community. The complete declaration of conformity is available on our website: www.irtec.com Federal Communication Commission Interference Statement FCC ID:NRIHS1X0900 www.irtec.com -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. P/N: 058-10900-002 Printed in Taiwan This product may be covered by one or more U.S. patents or patent applications. Please visit www.irtec.com for more information. The HFD sensor is more sensitive to the movements “toward” than “across” the sensor, so ensure to place the sensor at the position “toward” the movements of occupant. DETECTION PATTERN Mounting Height Coverage* *Sensitivity 100% 3 m (10 ft) 180 m2 (2,000 ft2) (m) Minor motion Major motion 6 m (20 ft) 100 m2 (1,200 ft2) (ft) 10 29mm (1.69”) 30 The frequency and maximum transmitted power in EU are listed as 5800 MHz: -11.28dBm. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: HFD sensors are best for use in areas with partitions and high dividers, or high level of minor motion activities. 20 Industry Canada statement: IC IC:ID:22993-X09HS1AC602 22993-X09HS1AC602 10 This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. IR-TEC International Ltd. 6 Rong An Road Luzhu Taoyuan 338 TAIWAN IR-TEC America, Inc. 590 W. Central Avenue Suite C Brea, CA 92821 USA 20 20 9 (m) 30 (ft) Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. N N OPERATION SENSOR SETTINGS The LMS-109 series is a line voltage operating occupancy sensor with hybrid switching output to control the operation of connected load. The sensor will switch on the light when it detects the presence and movement of a moving object (human, or vehicle) within its coverage, and automatically shut off the light after the delay time elapses. Different delay times can be programmed by an Accu-Set digital potentiometer. An ambient light sensor is built-in to inhibit switching on the light when ambient light level is higher than the threshold set. The LMS-109 provides 7 different light-Off delay time and daylight threshold settings via 2 potentiometers marked T and L respectively. 4 levels of sensitivity can be set via combination DIP switch #1 and #2. POS. 1 TIME TEST 1 LUX 5 10 WIRING DIAGRAM ON Various control modes may be achieved by different wiring connections. Basic wiring diagrams are included as below for reference. Consult with an IR-TEC team member if a more complex control is required. Red Black White White Line 5 10 20 30 20 25 60 24H TIME (Factory set) (10 minutes) (Factory set) SW1 & 2 (100% Sensitivity) SW3 & 4 (No Function) LMS-109 120/240/277VAC, 50/60 Hz Maximum load 120VAC 240VAC 277VAC -Incandescent/Halogen 800/*500W(VA) 5A 1200/*750W(VA) -Fluorescent Ballast/CFL 800/*500W(VA) 5A 1200/*750W(VA) -Ballast Electronic (LED) 540/*500VA 5A 1200/*750VA HFD sensitivity 25/50/75/100% selectable via DIP switch setting Load switching Zero-cross Hybrid-Switching HIC protection Max. 80A for 16.7msec. Detection range Up to 180 sq. m. @ 3 m (2,000 sq. ft @ 10 ft) Mounting height 2.4 ~ 6 m (8 ~ 20 ft) Ambient light level 7 level Accu-Set digital potentiometer T (min.) T* 1’ 3’ 5’ 10’ 20’ 30’ Delay time setting T/1'/3'/5'/10'/20'/30' , T=10 sec. for testing 10 15 20 25 60 24H Op. humidity Max. 95% RH Op. temperature -40°C~70°C (-40°F~158°F) Dimensions H92 x W43 x D29mm (H3.6"x W1.69"x D1.14") Factory Set *T=10 seconds shorten delay for testing convenience. The sensor will automatically resume to the factory default delay setting after 10 minutes, if the potentiometer has not been adjusted to other position. *Max load for operating temperature at 55°C~70°C (131°F~158°F) T - Delay Time The potentiometer T sets the period of delay time that sensor will turn off the connected lights after the area is vacated. L - Ambient Light Level N N Power supply Position L (lux) Load 15 LUX (ALS disabled) Neutral SPECIFICATIONS LMS-109 The potentiometer L sets the ambient light level that the sensor will activate occupancy sensing control. Sensitivity The sensitivity and detection pattern of HFD sensor may vary with the furniture placement, partition layout, wall material, and shape of the space. For example, the detection pattern will become long rectangular if sensor is placed in a long corridor. 4 levels of sensitivity can be set via combinations of DIP switch #1 and #2. Sensitivity DIP switch setting 100% 75% 50% 25% ON ON ON ON ON-ON ON-OFF OFF-ON IR-TEC International Ltd. warranties this product to be free of defects in materials or workmanship for a period of five years from date of shipment. There are no obligations or liabilities on the part of IR-TEC International Ltd. for consequential damages arising out or in connection with the use or performance of this product or other indirect damages with respect to loss of property, revenue, profit, or cost of removal, installation or reinstallation. OFF-OFF NOTE: DIP switch #3 and #4 are not functional for LMS-109. WARRANTY www.irtec.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : 058-10900-002_IM-EN_LMS-109 Creator Tool : Adobe Illustrator CS6 (Windows) Create Date : 2018:05:04 10:04:18+09:00 Modify Date : 2018:05:04 13:22:55+08:00 Metadata Date : 2018:05:04 13:22:55+08:00 Thumbnail Width : 256 Thumbnail Height : 184 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5197 bytes, use -b option to extract) Document ID : xmp.did:D49A5AE8384FE8118521DC163049D5AE Instance ID : uuid:9f9307ce-956d-445c-97a9-7f9008f7502e Original Document ID : uuid:204986159B0AE111BDC19448B1A00566 Rendition Class : proof:pdf Derived From Instance ID : uuid:c1ced891-10b5-47e7-8de6-5d611c51bb8d Derived From Document ID : xmp.did:99FB2CA89A43E8119E168B1DDD26F879 Derived From Original Document ID: uuid:204986159B0AE111BDC19448B1A00566 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:690747482FECE111A2868A1CFD8DCAE5, xmp.iid:D49A5AE8384FE8118521DC163049D5AE History When : 2012:08:22 15:59:21+08:00, 2018:05:04 10:04:15+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Producer : Adobe PDF library 10.01 N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 29.699996 Max Page Size H : 20.999993 Max Page Size Unit : Centimeters Font Name : ArialMT, Humanist521BT-Bold, Swiss721BT-Bold, Swiss721BT-Roman, Txt, AdobeMingStd-Light Font Family : Arial, Humanst521 BT, Swis721 BT, Swis721 BT, Txt, Adobe 明體 Std Font Face : Regular, Bold, Bold, Roman, Regular, L Font Type : Open Type, TrueType, Open Type, Open Type, TrueType, Open Type Font Version : Version 6.98, mfgpctt-v1.52 Wednesday, January 13, 1993 4:39:52 pm (EST), Version 1.01 emb4-OT, Version 1.01 emb4-OT, Macromedia Fontographer 4.1.3 4/14/97, Version 6.008;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False Font File Name : arial.ttf, HUM521B_0.TTF, tt0005m_.ttf, tt0003m_.ttf, txt_____.ttf, AdobeMingStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 預設色票群組 Swatch Group Type : 0 Swatch Colorant Swatch Name : 白色, 黑色, 炭筆色, 石墨色, 煙灰, 霧灰色, 拿鐵色, 卡布奇諾色, 摩卡奇諾色, 摩卡咖啡色, 火星紅, 紅寶石, 紅色, 南瓜黃, 潑濺, 陽光, 純黃色, 橄欖綠, 嫩芽綠, 翡翠色, 薄荷玫瑰露, 寶石綠, 海洋綠, 加勒比海藍, 純青色, 夏威夷藍, 昏黃藍, 星空藍, 深海藍, 亮淡紫色, 紫色, 水晶紫, 紫紅色, 純洋紅色, 整體紅色, 整體壓縮, 整體純黃色, 整體綠色, 整體純青色, 整體深海藍, New Color Swatch 2, New Color Swatch 10, New Color Swatch 3, New Color Swatch 7, New Color Swatch 6, AutoCAD Color, AutoCAD Color 2, AutoCAD Color 6, AutoCAD Color 3, AutoCAD Color 4 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 15.999996, 32.000000, 42.999996, 25.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 50.000000, 50.000000, 75.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 75.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000000, 100.000000, 100.000000, 92.941200, 10.196100, 92.941200, 92.941200, 10.196100, 92.971703, 92.971703, 54.924797, 0.000000, 54.924797 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 23.000002, 37.000000, 48.000000, 52.000000, 100.000000, 100.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 25.000000, 25.000000, 0.000000, 25.000000, 50.000000, 75.000000, 100.000000, 75.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 50.000000, 0.000000, 0.000000, 0.000000, 100.000000, 87.843102, 0.000000, 87.843102, 87.843102, 0.000000, 87.972801, 87.972801, 0.000000, 96.020401, 0.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 33.000000, 58.000000, 76.000000, 80.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 89.019600, 82.745102, 89.019600, 89.019600, 82.745102, 89.019600, 89.019600, 17.715700, 94.604401, 17.715700 Swatch Colorant Black : 0.000000, 100.000000, 75.000000, 60.000004, 45.000000, 30.000002, 0.000000, 0.000000, 19.999998, 38.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 25.000000, 25.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000000, 0.000000, 80.000000, 80.000000, 0.000000, 79.998497, 79.998497, 0.000000, 0.000000, 0.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Has XFA : No Page Count : 2 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools