ITEAD Intelligent Systems SONOFF Temperature And Humidity Monitoring WiFi Smart Switch User Manual

ITEAD Intelligent Systems Co., Ltd Temperature And Humidity Monitoring WiFi Smart Switch

User Manual

Overviewonoff TH10/16 is a Sonoff version that canmonitor and set temperature and humidity throughthe APP eWeLink. Just as the name indicats, thenew version Sonoff TH device supports two powersupply specifications: 10A or 16A. Sonoff TH 10/16supports presetting range for temperature orhumidity, when the temperature or humidity of theenvironment falls into the range, it willautomatically turn on or turn off connecteddevices.The device supports connecting to three kinds of temperature and humidity sensors(AM2301, DS18B20, DHT11). Actually, Sonoff TH 10A/16A Sonoff TH 10A/16A can workas a Sonoff when without connecting to a sensor. But compared to Sonoff, Sonoff10/16 is more safer, less radiation and in bigger size, easy operation. Mostimportantly, with the support of latest ewelink app, you can create chains of simpleconditional statements(Smart Scene). This means you can use them with temperatureand humidity sensors (AM2301, DS18B20, DHT11) to collect temperature and humiditydata, while these data can be used to trigger ON/OFF other smart devices(Sonoff,Sonoff RF, Sonoff SV, Slampher, smart socket, etc.) under your account. This deviceis perfect to work with electric fan, air conditioner, humidifier. Please note thatthis version does not have 433MHz RF function.We are selling two kinds of sensors: AM2301 and DS18B20. We've customize aninterface for Sonoff TH10/TH16 to easily connect with the sensor, just plug and play.Note that the sensor should be plug into Sonoff TH before you power it up, don'tplug or unplug the sensor in power on status. AM2301 is non-waterproff, while DS18B20can work in water.FeaturesSupports 90 ~ 250V AC inputSupport max 10A /16A inputSupport fast configure SSID and password connection through APPSupport automatic connect to server, register and update status info.Support tracking device status and timely remote control through APPSupport setting single/repeat/countdown timing tasksSupport real-time temperature and humidity displayingSupport 3 temperature and humidity sensors (AM2301, DS18B20, DHT11)Support preset temperature and humidity range to turn on/off
WIFI Characteristics802.11 b/g/n• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominantfrequency support 80 MHz and 160 MHz, support RTOS• Built-in TCP/IP protocol stack• Built-in TR switch, balun, LNA, power amplifier and matching network• Built-in PLL, voltage regulator and power supply management components, 802.11bmode +20 dBm output power• A-MPDU&A-MSDU aggregation and 0.4μs guard interval• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode• Support cloud OTA upgrade• Support STA/AP/STA + AP mode• Standby power consumption is less than 1.0 mW (DTIM3)• Other parameters are as followsCategory Parameters DescriptionWirelessParameterWireless standard 802.11 b/g/nFrequency range 2.4GHz-2.5GHz (2400M-2483.5M)HardwareParameterData portUART/I2CGPIO/PWMOperating voltage 3.0~3.6V(recommend 3.3V)Operating current Average： 80mAOperatingtemperature 0ºC-40ºC(32°F-104°F)OperatingHumidity 5%-90%RH, Non-condensingPCBA size 89.1mm*45.0mm*1.2mmSoftwareParameterWireless networkmode station/softAP/SoftAP+station
Securitymechanism WPA/WPA2Encryption type WEP/TKIP/AESFirmwareupgrationLocal serial programming/Cloud Upgrade/Hostdownload programmingSoftwaredevelopment Support secondary developmentNetwork protocols IPv4, TCP/UDP/HTTP/FTPUserconfiguration cloud server, Android/iOS APPSpecificationElectrical CharacteristicsHardwarePCB_Size 89.1X45.0X1.2mmInterface DHT11/DS18B20/AM2301Indicator LED WiFi, on or off state
Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 

Navigation menu