IXI Mobile OCHS01 OgoClip Handset User Manual QSG indd

IXI Mobile, Inc. OgoClip Handset QSG indd

user manual

Cover backQuickStart Guide OgoClip HandsetOC-HS1Insertion & RemovalOverviewHow to Use1) Turn ON by pressing the Volume Up button for 3 seconds (The LED should light up in blue color at regular intervals). The Handset will automatically recognize and connect with the Ogo during the first insertionTips: • To verify, click on the OgoClip icon on your Ogo home screen and look for the Handset option• To turn OFF, press the Volume Down button for 3 seconds2) For incoming calls, pull the slider out to answer the call3) To end the call, simply push the slider back in4) To redial the last number called, press on the Volume Up button for 3 secondsTips: • For call-waiting during an active call, press the Volume Up button for 3 seconds to switch calls• You can clip the Handset onto your shirt or a pocket as shown • Insert the Handset into the Ogo when not in use for storage and battery chargingThere’s an OgoClip for everyoneSliderVolume Down buttonLED Light Volume Up buttonSpeakerInsertionAlign the tab on the Ogo with the one on the OgoClip as shown and then insert the OgoClip in the slotRemovalPush the OgoClip with your finger as shown and then pull it out of the slotOgoClip HandsetWorld’s smallest receiverOgoClip LightsPlayful lights with cool patternsOgoClip StreamMusic (and calls) to my ears!OgoClip Bottle OpenerCheers!Copyright © 2000-2007 IXI Mobile, Inc. All rights reserved. IXI Mobile, Ogo and OgoClip are trademarks of IXI Mobile, Inc.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. "This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference and(2) this device must accept any interference received, including interference that may cause undesired operation ." FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Navigation menu