IXI Mobile OCHS01 OgoClip Handset User Manual QSG indd
IXI Mobile, Inc. OgoClip Handset QSG indd
user manual

Cover
back
QuickStart Guide
OgoClip Handset
OC-HS1
Insertion & Removal
Overview
How to Use
1) Turn ON by pressing the Volume Up button for 3 seconds
(The LED should light up in blue color at regular intervals).
The Handset will automatically recognize and connect with
the Ogo during the first insertion
Tips:
• To verify, click on the OgoClip icon on your Ogo home screen
and look for the Handset option
• To turn OFF, press the Volume Down button for 3 seconds
2) For incoming calls, pull the slider out to answer the call
3) To end the call, simply push the slider back in
4) To redial the last number called, press on the Volume Up
button for 3 seconds
Tips:
• For call-waiting during an active call,
press the Volume Up button for 3 seconds
to switch calls
• You can clip the Handset onto your shirt
or a pocket as shown
• Insert the Handset into the Ogo when not
in use for storage and battery charging
There’s an OgoClip for everyone
Slider
Volume Down button
LED Light
Volume Up button
Speaker
Insertion
Align the tab on the Ogo with the
one on the OgoClip as shown and
then insert the OgoClip in the slot
Removal
Push the OgoClip with your finger
as shown and then pull it out of
the slot
OgoClip Handset
World’s smallest
receiver
OgoClip Lights
Playful lights with
cool patterns
OgoClip Stream
Music (and calls)
to my ears!
OgoClip Bottle Opener
Cheers!
Copyright © 2000-2007 IXI Mobile, Inc. All rights reserved. IXI Mobile, Ogo and OgoClip are trademarks of
IXI Mobile, Inc.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment must not be co-located or operating in
conjunction with any other antenna or transmitter.
"This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference and(2) this device must accept any
interference received, including interference that may cause undesired operation ."
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.