Ibis Networks 301 Single InteliSocket User Manual DataSheet IS 301x

Download:
Mirror Download [FCC.gov]
Document ID	3266082
Application ID	GR/6vLDe+kDk/npKpQ/yqQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.7kB (133749 bits)
Date Submitted	2017-01-20 00:00:00
Date Available	2017-01-20 00:00:00
Creation Date	2016-03-10 09:25:25
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2016-03-10 09:25:25
Document Title	Microsoft Word - DataSheet-IS-301.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ibisadmin

IS-301
Single InteliSocket™
FEATURES
•
•
•
•
•
•
120V 15A
UL Certification
ZigBee Pro
17dBm RF Power
Surge Protected
RoHS Compliant
DESCRIPTION
The IS-301 is a smart socket which meters plug load energy usage and provides device on/off
capability. It works with other InteliSocketsTM to form a secure wireless mesh network for
control and reporting of data. Each network is anchored by an InteliGatewayTM base station
providing connectivity to the InteliNetworkTM, a cloud-based data collection and analysis
application.
PERFORMANCE
Parameter
Input Voltage (RMS)
Input Frequency
Output Current (RMS)
Output Power
Power Consumption
Reporting Interval
Accuracy (Energy)
Accuracy (Voltage)
Accuracy (Interval)
Resolution
RF Range
RF Transmit Power
Sockets per Network
ZigBee Channels
ZigBee Hive
Size
* Channel 26 limited to 3dBm
Ibis Networks
02/24/16
Symbol
VIN
Min
108
Typ
120
60
IOUT
POUT
Max
132
15
1800
15
255
0.5
50
17
Units
Hz
ms
W-s
dBm
120
26*
0x3FFF
11
0x3000
3.0 x 1.5 x 1.4
¡ 841 Bishop Street Suite 1601 ¡ Honolulu, HI 96813 ¡ www.ibisnetworks.com
inches
IS-301
Single InteliSocket™
COMPLIANCE
Agency
UL916 – Energy Management Equipment
ZigBee Profile (Plover)
FCC
File
0x114B
ENVIRONMENTAL
Parameter
Operating Temperature
Storage Temperature
Relative Humidity
Symbol
TO
TS
RH
Min
-40
Typ
25
Max
40
100
95
Units
InteliSockets are for indoor use only.
PROTOCOL
InteliSockets use Ibis’ custom Plover profile for commands, acknowledgements, and reporting
of data.
DATA
InteliSockets report data typically every 15 seconds. Each report packet is comprised of socket
type, ZigBee channel, ZigBee hive (PANID), interval (seconds), voltage (RMS), frequency (Hz),
energy (watt-seconds), and power factor (fraction). From these data we can calculate
instantaneous power (watts) and current (amps).

 

  
 


   ¡  
The InteliGateway appends additional information (IP, timestamp, location, etc.) before
uploading to the InteliNetwork. This allows any socket in the world to be located and
addressed individually.
Ibis Networks
02/24/16
¡ 841 Bishop Street Suite 1601 ¡ Honolulu, HI 96813 ¡ www.ibisnetworks.com
IS-301
Single InteliSocket™
PUSHBUTTON
The illuminated pushbutton provides addition control features. First and foremost, it is a
manual override for turning the outlet on (green) and off (red). If pressed and held for at least
three seconds it causes a reboot of the socket. If held in for ten seconds (two reboots) it
reverts back into factory mode settings. This is a useful feature for maintenance purposes or
when a socket gets moved from one location to another. A blinking backlight indicates the
socket has not associated with a mesh network yet.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the
approval of manufacturer could void the user’s authority to operate this equipment.
To satisfy RF exposure requirements, this device and its antenna must operate with a
separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
Ibis Networks
02/24/16
¡ 841 Bishop Street Suite 1601 ¡ Honolulu, HI 96813 ¡ www.ibisnetworks.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2016:03:10 09:25:25
Modify Date                     : 2016:03:10 09:25:25
Title                           : Microsoft Word - DataSheet-IS-301.docx
Creator                         : PScript5.dll Version 5.2.2
Author                          : ibisadmin

EXIF Metadata provided by EXIF.tools