Icon Research WMS30 WMS-30 WiFi Module User Manual wms 30 user guide rev 1 0

Download:
Mirror Download [FCC.gov]
Document ID	2326465
Application ID	5K5qtihHPb536WNhuZwdAg==
Document Description	User guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.69kB (221116 bits)
Date Submitted	2014-07-16 00:00:00
Date Available	2014-07-16 00:00:00
Creation Date	2014-07-14 16:01:08
Producing Software	Acrobat Elements 10.0.0 (Windows)
Document Lastmod	2014-07-14 16:01:08
Document Title	Microsoft Word - wms-30 user guide rev 1-0.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	James Edgar

WMS-30
User Guide
Revision 1.0
May 2014
PRELIMINARY
NOTICE
Information contained in this document is believed to
be accurate and reliable. However, due to ongoing
product developments and revisions, Icon Research
Ltd cannot guarantee the accuracy of this document
after the date published nor can it accept
responsibility for errors or omissions.
This document, and the software and/or hardware
which it describes, is subject to change without notice.
Icon Research Ltd acknowledges that various
products or trademark names referred to in this
document are subject to copyright and/or trademark
by their respective registered holders.
CONTENTS
CHAPTER 1 – WMS‐30 Operation ................................................................................ 1‐1
1.1 Overview ............................................................................................................. 1‐1
1.2 Specification ........................................................................................................ 1‐2
1.3 Types of Antenna ................................................................................................ 1‐2
CHAPTER 2 – Setting Up ............................................................................................... 2‐1
2.1 Regulatory Power Settings ................................................................................. 2‐1
2.2 Information for OEM Installers ........................................................................... 2‐1
CHAPTER 3 – Compliance Statements .......................................................................... 3‐1
3.1 FCC Compliance Statements ............................................................................... 3‐1
3.2 IC (Industry Canada) Compliance Statements ..................................................... 3‐1
3.3 Agency label Informations .................................................................................. 3‐2
Chapter 1 – WMS‐30 Operation
Chapter 1 – WMS‐30 Operation
1.1
Overview
The WMS‐30 is single band (2.4GHz) 802.11b/g/n SDIO wireless LAN module
based on the Qualcomm Atheros AR6013 integrated wireless chip.
It is designed for use with a single external omnidirectional antenna up to a
maximum gain of 5dBi. The connector is a type MMCX which can support
direct connection to an antenna or indirect connection via a suitable cable
assembly.
The device is designed for integration into a host system which runs an
appropriate driver for the installed operating system, or runs bespoke
embedded software. The device has full modular certification so can be
incorporated into a host device without further testing provided that the
installation and regulatory compliance rules in this manual are followed.
A block diagram of the device is shown below. As can be seen, it is a highly
integrated design which results in a compact and low power solution for wifi
communication.
A photograph of the unit is shown below. It fits into a standard size SDIO
socket. A mounting hole, diameter 3.5mm is provided in the upper left
corner to assist with locking the unit in place, if desired. Always use plastic
mounting hardware. A green LED is fitted below the mounting hole which
illuminates when power is applied.
1‐1
Chapter 1 – WMS‐30 Operation
LED
1.2
Specification
Wireless
Operational frequency range
2.4Ghz to 2.483GHz
SDIO
Host Interface
Supports SDIO 1.x and 2.0
Speed
50MHz (4‐bit and 1‐bit)
Power Input
3.3V +/‐5%
Environmental
1.3
Dimensions
42.0mm x 24.0mm
Operating temperature
‐20⁰C to +85⁰C
Type of Antenna
The WMS‐30 module can be used with any omnidirectional antenna with a
maximum gain of 5dBi. No allowance is made for losses in any
interconnecting cable (ie. losses are assumed to be 0dBi). The WMS‐30 is
fitted with a gold‐flashed MMCX jack connector (part number MMCX‐J‐P‐H‐
1‐2
Chapter 1 – WMS‐30 Operation
ST‐SM1 from Samtec, impedance 50 ohm). A mating 50 ohm impedance
connector and interconnecting cable must be used.
One recommended antenna is the OD24M‐5 from Laird. This is incorporates
an N‐type connector. Therefore a MMCX‐to‐N‐type cable assembly is
required. This is available from Icon Research, or Icon Research can provide
assistance for you to have this manufactured to the length you require.
1‐3
Chapter 1 – WMS‐30 Operation
1‐4
Chapter 2 – Setting Up
Chapter 2 – Setting Up
2.1
Regulatory Power Settings
The WMS‐30 responds to channel calibration and power level settings as
specified in .bin files that are available from Icon Research Ltd. The OEM
installer must ensure that the correct .bin file is installed in the host device
to meet the regulatory requirements of the geographical area in which the
device is to be used.
Contact Icon Research for issue of the .bin file(s) that you require.
2.2
Information for OEM Installers
The following points must be followed when installing the WMS‐30 in a
host system or device:
1.
The WMS‐30 device must be professionally installed.
2.
A label must be fitted to the outside of the final system or host device
identifying the FCC ID of the WMS‐30. Suitable wording is Contains
FCC ID: RO7‐WMS30 or Contains transmitter module FCC ID: RO7‐
WMS30.
3.
The same label must contain the IC ID of the WMS‐30. Suitable
wording is Contains IC: 12031A‐WMS30 or Contains transmitter
module IC: 12031A‐WMS30.
4.
The WMS‐30 module must be installed and used in strict accordance
with the manufacturer’s instructions. Attention is especially drawn to
the type of antennae allowed.
2‐1
Chapter 2 – Setting Up
2‐2
Chapter 3 – Compliance Statements
Chapter 3 – Compliance Statements
3.1
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co‐located or operated in conjunction with any other antenna or
transmitter.
The antenna must be installed to provide a separation distance of at least 20
cm from all persons.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
3.2
IC (Industry Canada) Compliance Statements
English
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada licence‐exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
French
Conformément à la réglementation d'Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention
des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte
3‐1
Chapter 3 – Compliance Statements
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
3.4
Agency Label Information
FCC ID: RO7‐WMS30
IC: 12031A‐WMS30
3‐2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : James Edgar
Create Date                     : 2014:07:14 16:01:08+01:00
Modify Date                     : 2014:07:14 16:01:08+01:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Elements 10.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - wms-30 user guide rev 1-0.doc
Creator                         : James Edgar
Document ID                     : uuid:0f002d7f-5faa-417a-aafa-c63d9b180ab4
Instance ID                     : uuid:f4cda93d-7425-4a1d-a841-cf76ae3ebe5e
Page Count                      : 12

EXIF Metadata provided by EXIF.tools