Iconnect 511 802.11n 150M Ultra Wireless LAN Router User Manual QIG AIPW511V0 7

Download:
Mirror Download [FCC.gov]
Document ID	2256893
Application ID	chZt1Y0Ajk/Nf0pLOtyZSg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	81.08kB (1013544 bits)
Date Submitted	2014-05-01 00:00:00
Date Available	2014-05-02 00:00:00
Creation Date	2013-05-30 18:23:53
Producing Software	Acrobat Distiller 10.1.7 (Windows)
Document Lastmod	2014-04-24 23:44:49
Document Title	Microsoft Word - QIG-AIPW511V0.7
Document Creator	PScript5.dll Version 5.2.2
Document Author:	acer

AIP‐W511 ultra compact wireless adapter
Quick Installation Guide
Package Content
Thank you for choosing ALFA ultra compact wireless adapter. Before installing the
adapter, please verify contents inside the product box.
□
AIP‐W511 ultra compact wireless adapter
□
Quick Installation Guide
NOTE:
If any item in this package is missing or damaged, please contact the distributor
immediately.
Product Outlook
WPS button
Power
LAN
WLAN
Reset button
Mode Switch
Installation
 Default operation mode is USB wireless adapter
 Insert the ultra compact wireless adapter into the USB port of PC or your laptop
computer.

Click “Setup.exe” when window’s auto‐play menu is prompted.
Click Yes or Allow when windows User Account Control window pop‐up.
Please wait till driver of ultra compact wireless adapter is installed on your
computer. Open your web browser, and insert http://alfasetup.com in the address
bar.
NOTE: in this mode, Windows and MAC OS X (10.6 or later) drivers are supported.

Understand Product Operation Modes, and make selection
Default operation mode of ultra compact wireless adapter is wireless adapter.

Wireless adapter mode
In this mode, ultra compact wireless adapter performs as a 802.11n wireless
adapter for WLAN access. Just connect ultra compact wireless adapter to your
laptop or desktop PC, WLAN access is ready to use.
NOTE: in this mode, Windows and MAC OS X (or later) drivers are supported.

Hotel AP / Router Mode
ONLY DSL modem/cable existed in your network, ultra compact wireless adapter
is very convenient to convert Ethernet to wireless signals. It acts as a wireless
AP/router for WLAN access, and Internet sharing. Just connect Ultra compact
wireless adapter to DSL modem via Ethernet/RJ‐45 cable, it will do the tasks for
you.
NOTE: in this mode, ultra compact wireless adapter can be powered by
PC/laptop or mobile power bank.

Ethernet adapter mode
In this mode, easily connect your laptop or computer to an Ethernet network
with the ultra compact wireless adapter. Stylish and compact, it connects to the
USB 2.0 port of your laptop or computer and provides an RJ‐45 connector that
supports 10/100BASE‐T network access.

Product Configurations
In default mode, ultra compact wireless adapter is WLAN client.
To start the product configurations, connect USB cable to ultra compact wireless
adapter..
Open web browser, and enter http://alfasetup.com, product setting page will
appear as below:
WLAN client mode:
Click on Next, insert SSID of wireless AP manually or perform a Site Survey to
scan the available wireless AP nearby.
Click on Next to select, and insert suitable wireless security to connect to target
wireless AP.
Click on Finished, the ultra compact wireless adapter shall now connect to
wireless AP, and you may start Internet browsing.

WLAN AP (Access Point) mode:
Open web browser, and enter http://alfasetup.com, product setting page will
appear as below:
Please select AP in mode selection tab.
Click on TCP/IP menu, to change or keep LAN IP parameters in wireless AP
mode.
Click on Wireless ‐‐ > Basic Settings menu, to change or keep LAN IP parameters
in wireless AP mode.
Click on Wireless ‐‐ > Security Settings menu, there is a default security config
in this page. To change or keep wireless security parameters, please change the
values in this page.
NOTE: To apply the changes, please reboot the router to activate the new
configurations in the WLAN AP setting menu.

WLAN Router mode:
Open web browser, and enter http://alfasetup.com, product setting page will
appear as below:
Please select Router in mode selection tab.
Click on Setup Wizard menu, refer to the screen instructions to fill‐in required
parameters for Internet access.
NOTE: default IP address in router mode is 192.168.11.1
FURTHER INFORMATION
The steps above introduce simple installation for ultra compact wireless adapter.
For further configuration of the Wi‐Fi Protected Setup (WPS), Software AP etc,
please refer to the user’s manual. Any further questions, please contact the local
dealer or distributor where you purchased this product.
FCC ID: 2AB87511
Model No.: AIP-W511
Model name: 802.11n 150M Ultra Wireless LAN Router
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. Th
e device can be used in portable exposure condition without restriction.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 10.1.7 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2014:04:24 23:44:49+08:00
Create Date                     : 2013:05:30 18:23:53+08:00
Metadata Date                   : 2014:04:24 23:44:49+08:00
Format                          : application/pdf
Title                           : Microsoft Word - QIG-AIPW511V0.7
Creator                         : acer
Document ID                     : uuid:917ac0e1-1d6e-4250-b136-766b761429ea
Instance ID                     : uuid:0c1a88c1-3513-4b3a-9dd4-a9062e6f0575
Page Count                      : 11
Author                          : acer

EXIF Metadata provided by EXIF.tools