Identiv CLOUD3701F-001 RFID Smartcard Reader User Manual

Identiv, Inc RFID Smartcard Reader Users Manual

Users Manual

Identive Cloud 3701 F – Operation Manual Version: 0 Page 1 of 5 Operation Manual for Cloud 3701F Version 0
Identive Cloud 3701 F – Operation Manual Version: 0 Page 2 of 5 Document History Version Date Description of Change Author 0.0 06 May 2014 Initial version Sarav
Identive Cloud 3701 F – Operation Manual Version: 0 Page 3 of 5 Table of Contents 1 Scope of the document ....................................................................................................... 4 2 About the reader.................................................................................................................. 4 3 Operating conditions ........................................................................................................... 4 4 Driver installation ................................................................................................................. 4 5 Communication with a card ................................................................................................. 4 6 Certification - FCC ............................................................................................................... 5 7 Certification – CE ................................................................................................................ 5
Identive Cloud 3701 F – Operation Manual Version: 0 Page 4 of 5 1 Scope of the document The document provides the Operational description of Cloud 3701F reader. 2 About the reader Identive Cloud 3701F is a USB based Contactless smartcard reader capable of reading ISO14443 Contactless cards. The reader connects to a host PC via USB2.0 Full speed interface. 3 Operating conditions Operating temperature : 0 to 50 C Storage temperature : -25 to 85 C Humidity : 95%RH 4 Driver installation Follow the sequence of steps • Plug in the reader to a Windows • The PC prompts for a driver • Select Microsoft CCID driver and install the driver • After the driver installation, the reader is ready for use 5 Communication with a card Follow the sequence of steps to communicate with the contactless card, • Plug in the reader to a Windows PC and load the driver • Launch the PCSCDIAG utility • Place a contactless card on top of the reader • Check the ATR of the card being displayed
Identive Cloud 3701 F – Operation Manual Version: 0 Page 5 of 5 6 Certification - FCC This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause interference harmful to radio communications. However, there is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or TV technician for help. Information to user Changes or modifications not expressly approved by Identive could void the user’s authority to operate this equipment. 7 Certification – CE Identive hereby declares that the Identive CLOUD 37001F devices mentioned herein are in compliance with the essential requirements and other relevant portions of the Directive R&TTE.

Navigation menu