Identiv CLOUD3701F-001 RFID Smartcard Reader User Manual
Identiv, Inc RFID Smartcard Reader Users Manual
Identiv >
Users Manual
Identive Cloud 3701 F – Operation Manual
Version: 0 Page 1 of 5
Operation Manual for Cloud 3701F
Version 0
Identive Cloud 3701 F – Operation Manual
Version: 0 Page 2 of 5
Document History
Version
Date
Description of Change
Author
0.0 06 May 2014 Initial version Sarav
Identive Cloud 3701 F – Operation Manual
Version: 0 Page 3 of 5
Table of Contents
1 Scope of the document ....................................................................................................... 4
2 About the reader.................................................................................................................. 4
3 Operating conditions ........................................................................................................... 4
4 Driver installation ................................................................................................................. 4
5 Communication with a card ................................................................................................. 4
6 Certification - FCC ............................................................................................................... 5
7 Certification – CE ................................................................................................................ 5
Identive Cloud 3701 F – Operation Manual
Version: 0 Page 4 of 5
1 Scope of the document
The document provides the Operational description of Cloud 3701F reader.
2 About the reader
Identive Cloud 3701F is a USB based Contactless smartcard reader capable of reading
ISO14443 Contactless cards. The reader connects to a host PC via USB2.0 Full speed interface.
3 Operating conditions
Operating temperature : 0 to 50 C
Storage temperature : -25 to 85 C
Humidity : 95%RH
4 Driver installation
Follow the sequence of steps
• Plug in the reader to a Windows
• The PC prompts for a driver
• Select Microsoft CCID driver and install the driver
• After the driver installation, the reader is ready for use
5 Communication with a card
Follow the sequence of steps to communicate with the contactless card,
• Plug in the reader to a Windows PC and load the driver
• Launch the PCSCDIAG utility
• Place a contactless card on top of the reader
• Check the ATR of the card being displayed
Identive Cloud 3701 F – Operation Manual
Version: 0 Page 5 of 5
6 Certification - FCC
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instructions, may cause interference harmful to radio communications. However, there
is no guarantee, however, that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio or TV technician for help.
Information to user
Changes or modifications not expressly approved by Identive could void the user’s authority
to operate this equipment.
7 Certification – CE
Identive hereby declares that the Identive CLOUD 37001F devices mentioned herein are in
compliance with the essential requirements and other relevant portions of the Directive R&TTE.