Identiv CLOUD4000F-001 Dual Interface Smart Card Reader Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2068066
Application ID	EB7Bvsrj0hTE4q4sJst0xg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.08kB (63446 bits)
Date Submitted	2013-09-10 00:00:00
Date Available	2013-09-10 00:00:00
Creation Date	2013-09-04 11:45:39
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2013-09-04 11:45:39
Document Title	Microsoft Word - Identive Cloud 4000 F DTC User manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Calai

Identive Cloud 4000 F DTC – User Manual
User manual
For
Identive Cloud 4000 F DTC
Version 1.0
Author
Version
Date
Version: 1.0
Sudhan
1.0
28-August-2013
Page 1 of 5
Identive Cloud 4000 F DTC – User Manual
Document History
Version Date
1.0
29-August-13
Version: 1.0
Description of Change
Initial version
Page 2 of 5
Author
Sudhan
Identive Cloud 4000 F DTC – User Manual
Table of Contents
Scope of the document ..................................................................................................... 4
About Identive Cloud 4000 F DTC reader ......................................................................... 4
Driver Installation in Windows ........................................................................................... 4
Communication with Card ................................................................................................. 4
Certifications ..................................................................................................................... 5
FCC ..................................................................................................................................... 5
IC ......................................................................................................................................... 5
Version: 1.0
Page 3 of 5
Identive Cloud 4000 F DTC – User Manual
Scope of the document
The user manual specifies the basic application of the reader by the customer.
About Identive Cloud 4000 F DTC reader
Identive Cloud 4000 F DTC is a USB based dual interface reader capable of reading ISO7816
Contact smart cards and ISO14443 Contactless cards. The reader connects to a host PC via USB 2.0
Full speed interface.
Driver Installation in Windows
Follow the sequence of steps to install the driver




Plug in the reader to a Windows PC
The PC prompts for a driver
Select Microsoft CCID driver and install the driver
The device enumerates with Identive VID and PID strings
Communication with Card
Follow the sequence of steps to communicate with the contact card,




Plug in the reader to a Windows PC and load the driver
Launch the PCSCDIAG Utility
Insert the contact card into the card slot of the reader
Check the ATR of the card being displayed in the PCSCDIAG Utility
Follow the sequence of steps to communicate with the contactless card,




Version: 1.0
Plug in the reader to a Windows PC and load the driver
Launch the PCSCDIAG utility
Place a contactless card on top of the reader
Check the ATR of the card being displayed in the PCSCDIAG Utility.
Page 4 of 5
Identive Cloud 4000 F DTC – User Manual
Certifications
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Information to user
Changes or modifications not expressly approved by Identive could void the user's authority
to operate the equipment.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement
Version: 1.0
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Calai
Create Date                     : 2013:09:04 11:45:39-07:00
Modify Date                     : 2013:09:04 11:45:39-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - Identive Cloud 4000 F DTC User manual.doc
Creator                         : Calai
Document ID                     : uuid:91d96aa3-02ba-4cbc-b88c-52781e98de2a
Instance ID                     : uuid:48ea106d-ee25-4da2-b6f0-d25e81087d27
Page Count                      : 5

EXIF Metadata provided by EXIF.tools