Identiv PAT1322-0300 RFID Reader User Manual Revised Manual

Download:
Mirror Download [FCC.gov]
Document ID	659514
Application ID	zV25qjE+1W18ChLmot1HNA==
Document Description	Revised Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.09kB (38687 bits)
Date Submitted	2006-05-18 00:00:00
Date Available	2006-05-18 00:00:00
Creation Date	2006-05-16 15:26:18
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-05-16 15:26:44
Document Title	Microsoft Word - PAT 13x2- Installation and Operation Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Bob Cole

Installation and Operation Manual
PAT 13x2
Rev 1.0
18th November 2005
PACT 13x2 Outdoor reader- Installation and Operation Manual
Page 1 of 5
Installation Instructions:
•
•
Fix the mounting plate in an appropriate position on the wall, where the cable can be easily
connected to the back of the reader.
Place the reader on the mounting plate and fix it by using mounting screw.
This is shown in the picture below.
Connector
Male - female
Cable
Unit
Screw
Mounting
plate
PACT 13x2 Outdoor reader- Installation and Operation Manual
Page 2 of 5
Mounting plate details
Fig 1.1 Mounting plate (Horizontal view)
Fig 1.2 Mounting plate (Normal view)
PACT 13x2 Outdoor reader- Installation and Operation Manual
Fig 1.3 Mounting plate (Vertical view)
Page 3 of 5
Pin details
Connector details for Wiegand/Magstripe – 10pin connection
Pin Number
10
Signal Name
Relay IN1
Relay IN2
Relay IN3
Relay GND
Wiegand Data0 / Mag Data
Wiegand Data1 / Mag CLK
Wiegand LED IN
Wiegand Buzzer IN
Wiegand GND
Wiegand +12V
Connector details for RS485 – 8pin connection
Pin Number
Signal Name
(Full Duplex Operation )
Signal Name
(Half Duplex Operation)
RX_A
RX_B
TX_A
TX_B
RS485 GND
SHIELD
Power +12V
Power GND
RX/TX_A
RX/TX_B
No connection
No connection
RS485 GND
SHIELD
Power +12V
Power GND
A – Non-inverted RS485 differential signal; B – Inverted RS485 differential signal
**Only for reader installed at the ends in the RS485 network
Testing:
•
•
•
•
•
•
•
Connect the reader to the host through Wiegand/Magstripe/RS485 interface
Switch on the power to the reader and check if the keypad LED glows. This signifies that the reader is
waiting for the PIN
Enter the PIN
Check if the contactless LED glows. This activity of the reader signifies that the PIN has been
successfully accepted and the reader is waiting for the contactless card.
Wave the Contactless Test card in front of the reader.
Check for the contact less LED to blink steadily .This activity of the reader signifies that the reader is
reading the data from the card and passing it to the host.
For a successful read, the access control LED bar should glow in GREEN and a short beep sound
must be heard from the reader.
Note: The Product is to be connected to a UL Listed compatible Access Control System.
PACT 13x2 Outdoor reader- Installation and Operation Manual
Page 4 of 5
CAUTION
Changes or modifications to hardware that are not expressly approved by SCM Microsystems shall void the
user’s authority to operate the equipment.
PACT 13x2 Outdoor reader- Installation and Operation Manual
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2006:05:16 15:26:18-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:05:16 15:26:44-07:00
Metadata Date                   : 2006:05:16 15:26:44-07:00
Format                          : application/pdf
Creator                         : Bob Cole
Title                           : Microsoft Word - PAT 13x2- Installation and Operation Manual.doc
Document ID                     : uuid:86ca7d7e-1aba-4d86-880f-ab7fa3db0a7b
Instance ID                     : uuid:0f40829a-e342-4968-b4fc-e7facee22bcb
Page Count                      : 5
Author                          : Bob Cole

EXIF Metadata provided by EXIF.tools