Identiv TSSPSC-02 uTrust TS-Scramblepad SC User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3785320
Application ID	n9BJzGnHjgz0bBxcYEadRg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.71kB (971354 bits)
Date Submitted	2018-03-17 00:00:00
Date Available	2018-06-15 00:00:00
Creation Date	2018-01-31 13:29:11
Producing Software	Microsoft: Print To PDF
Document Lastmod	2018-01-31 13:29:11
Document Title	Microsoft Word - 8336 uTrust TS SCRAMBLE PAD SC Reader Installation and User manual - Rev1.1
Document Author:	Sixtus

Installation and User manual
For
uTrust TS ScramblePad SC Reader
Version 1.1
Confidential
Author
Version
Date
Document no
Sixtus Stanly
1.1
31-Jan-2018
833601
Document History
Version
1.0
1.1
Date
10-Jan-18
31-Jan-18
Description of Change
Initial version
Updated comments from uL
Author
Sixtus Stanly
Sixtus Stanly
uTrust TS Scramblepad SC
Contents
1.0
Introduction ................................................................................................................................ 4
2.0
Reader ......................................................................................................................................... 4
2.1
2.2
2.3
Functionality.............................................................................................................................. 4
Front/Top Casing with Contact Card ........................................................................................ 4
Rear view with back plate and metal bracket ........................................................................... 5
3.0
Product details ........................................................................................................................... 5
4.0
Specifications ............................................................................................................................. 6
4.1
Rated current - PoE operating voltage range ........................................................................... 6
5.0
Power up and Testing ................................................................................................................ 6
6.0
Product Label ............................................................................................................................. 7
7.0
Installation .................................................................................................................................. 8
8.0
Certifications .............................................................................................................................. 9
8.1
8.2
8.3
FCC........................................................................................................................................... 9
IC .............................................................................................................................................. 9
UL 294 ...................................................................................................................................... 9
Page 3 of 9
uTrust TS Scramblepad SC
1.0 Introduction
This document details the Physical Access Control Reader uTrust TS ScramblePad SC, Model
Number: 8336) and its user instruction and installation procedures. The 8336 reader extends the
features already supported by the uL 294 certified 8330 readers, by adding an interface for accessing
a Contact Smart Card. This is achieved by the addition of two add-on boards to the 8330 hardware
that provides the Contact Smart card functionality. The interfaces to the control panel and all external
cabling are identical to that of the 8330 readers.
2.0 Reader
2.1
Functionality
TS ScramblePad reader is a physical access control smart card reader that can read HF and LF
contactless credentials, conforming to the following standards: ISO 14443 A & B, ISO15693 with a
randomly displayed keypad pin entry for additional security. The reader addition of the contact
interface enables the reader to access ISO-7816 complaint contact smart cards in the ID-1 form
factor. The reader can interface with an access control system equipped with a Wiegand, RS485 halfduplex or the Ethernet interface. Interface to the control unit via Ethernet is not evaluated by uL.
2.2
Front/Top Casing with Contact Card
Page 4 of 9
uTrust TS Scramblepad SC
2.3
Rear view with back plate and metal bracket
3.0 Product details
Product Name
: uTrust TS ScramblePad SC
Model Name
: 8336
Device Type
: Physical Access control Reader (accessory equipment) that has
RFID reader, 13.56MHz (HF) / 125 KHz (LF), Scramble Keypad and
Contact Smart Card interface.
Type of equipment
: Suitable for Indoor use
Interface Type
: Phoenix connectors and RJ45
Voltage Rating
: 12V DC (or) 48V on RJ45 Connector (POE)
Current Rating @12V
Current rating via POE
: Max Current : 300 mA, Typ Current : 270 mA
: Max Current : 82mA , Typ Current : 68mA
Communication protocol
: Wiegand; Shielded cable ,Max length - 500ft ,Min AWG - 22
RS485 (2wire - Half Duplex); Shielded twisted pair; Max length
1000ft, Min AWG -24
Page 5 of 9
uTrust TS Scramblepad SC
10BaseT ETH – Not evaluated by uL
4.0
Specifications
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes,
and the authorities having jurisdiction.
Model
Operating Voltage
Current
12 VDC
Typ: 270 mA
Max: 300 mA
8336
POE@ 48VDC




Operating
temp
Operating
humidity
0 to +49C
85 +/-5 % RH
Typ: 68 mA
Max: 82 mA
Class 2 listed power supply with 12VDC to be used to power the reader
POE sourcing equipment shall be UL Listed. Eg ALTRONIX NetWay8M
When the readers use POE as a power source, the power input wiring from the control unit
(i.e. Red and Black for 8336) shall be disconnected
The maximum length of the Ethernet cable when using POE as the power source in UL
installations is limited to 30 meters (98.5 feet)
4.1
Rated current - PoE operating voltage range
Voltage (V)
44
46
48
50
52
54
56
57
Max Current (mA)
87
84
82
78
75
73
72
70
Typ Current (mA)
73
70
68
65
64
67
60
59
5.0 Power up and Testing
Turn power on
The LED blinks 3 times green with a long beep, then turns Blue
Insert a Contact Smart Card in the Contact Slot.
Scrambling display comes up with buzzer tone. LED glows Orange.
Flash a Contactless card on the reader face
The LED glows Orange, and turns to blue when the card is removed.
Press Start Key
Scrambling display with buzzer tone & displays scrambled key
Wiegand / RS485
Communication to the Panel is done through Wiegand / RS485.
RJ45 Ethernet cable
Reader can be powered from POE. Communication happens through Ethernet also, but not
evaluated by uL.
Page 6 of 9
uTrust TS Scramblepad SC
This is the default reader behavior in a standalone condition.
6.0 Product Label
SHIELD – should be connected to the cable shield.
Caution:
During wiring make sure that the PWR lines does not contact any other conductors, as it might affect
reader functionality / cause damage to the reader.
Page 7 of 9
uTrust TS Scramblepad SC
7.0 Installation
All cabling and wiring shall be uL Listed and/or uL Recognized.




Install the required mounting box to the wall
Take the cable from the rear side of the reader as per the pin outs in the label drawing
Secure the reader unit with four screws at the corner into the mounting box
Fix the bezel on the top of the casing
Page 8 of 9
uTrust TS Scramblepad SC
8.0 Certifications
8.1
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Information to user
Changes or modifications not expressly approved by Identiv could void the user's authority to operate
the equipment.
8.2
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
8.3
UL 294
Access control performance levels
Destructive attack
Line Security
Endurance
Standby Power
IV
Page 9 of 9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (92 0 obj) not found at 969159

EXIF Metadata provided by EXIF.tools