Igloohome IGB4 Igloohome Smart Deadbolt 2S User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4187287
Application ID	nmhgWzh6RFqOw57sxB86HQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.02kB (437779 bits)
Date Submitted	2019-03-03 00:00:00
Date Available	2019-03-03 00:00:00
Creation Date	2019-02-25 11:40:34
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2019-02-25 12:10:06
Document Title	Microsoft Word - user manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Igloohome Smart Deadbolt 2S
Model No.: IGB4
1. Dimensions and weight
Front ‐ Height
Front ‐ Width
Front ‐ Thickness
Back ‐ Height
Back ‐ Width
Back ‐ Thickness
144.5 mm
60 mm
13 mm (11 mm without rubber)
160mm
64.5mm
52mm
Gross
Net
1.64 kg
1.28 kg
2. Overall Design
Front:
3. Door Compatibility
Door thickness
range is 35mm to
60mm
If 60mm door thickness, no need to cut tailpiece
during installation.
If 55mm door thickness, cut 1 notch of tailpiece.
If 50mm door thickness, cut 2 notch of tailpiece.
If 45mm door thickness, cut 3 notch of tailpiece.
If 40mm door thickness, cut 4 notch of tailpiece.
If 35mm door thickness, cut 5 notch of tailpiece.
When standing in front of the door:
 If the door lock in front of you is at the RIGHT, it is a LEFT HANDED DOOR.
 If the door lock in front of you is at the LEFT, it is a RIGHT HANDED DOOR.
Note that the LH/RH orientation does not depend on the bolt coming out
direction.
4. Material:
 Body: Zinc Alloy
 Battery Compartment: ABS
 Faceplate: Acrylic
5. Environmental and Reliability
 Operating Temperature: ‐25 to 55 Degree Celsius
 Storage Temperature: ‐40 to 70 Degree Celsius
 Operating Humidity: 0 to 95% Relative Humidity (Rh)
 Dust and Water Resistance: Product must pass IP65 certification
6. Battery Life
 Battery used: 4 x AA
 Up to 1 year
7. Buttons and LED
 12 Buttons (4 x 3)
 Keypad LED
 UNLOCK Icon
8. Audio and LED indications
Digit
Unlock icon
Clear icon
Bluetooth connection
Successfully unlocked
Successfully locked
Incorrect PIN
Reached max no of digits (16)
Keypad Disabled Mode activated
Keypad Disabled Mode
deactivated
Keypad Security Lockout Alarm
1 short Beep
1 short Beep
2 short beeps
UNLOCK icon flashes BLUE
A‐B‐C‐D beeps after unlocked
1 long beep after locked
4 short beeps
4 short beeps
Very Long beep
2 short beeps
Keypad Security Lockout
deactivated
Tamper Alarm
2 long beeps
Keep long beep
Low Battery Alert
D‐C‐B beeps when keypad woken up
low‐high siren
Obstruction Alarm
6 x 4 short beeps
Deleted PIN Alert / OTP used PIN 3 x 4 short beeps
Alert
Factory Reset
D‐C‐B‐A beeps
9. Masking PIN
 Maximum = 16 digits including masking pin
 Product will allow up to 8 masking pins before the actual PIN code (8
digits).
 Product will allow up to 9 masking pins before the actual PIN code (7
digits).
 Product will allow up to 10 masking pins before the actual PIN code
(6 digits).
 Product will allow up to 11 masking pins before the actual PIN code
(5 digits).
 Product will allow up to 12 masking pins before the actual PIN code
(4 digits).
10.Emergency Jumpstart
 If internal batteries are fully drained or low Battery, user can use a 9V
Battery to stay in contact to 2 conical contact pins (about 12mm
apart) to jumpstart the product.
 When that 9V battery contacts with the 9V contact, there will be one
single beep and keypad lights up for user to use any entry methods to
unlock the product.
11.Tamper Alarm
 If the main cable between the front panel and back panel is
disconnected, it will trigger the tamper alarm. If the cable is
connected back, it will recover.
12.Manual Relock
 Hold on UNLOCK Button for one second to manual relock
 Can turn thumbturn or use physical key to physically relock
13.Auto Relock
 If Sensor Relock is ON, the lock will relock after the door is closed. If
the lock is unlocked and door is kept closed, the lock will relock after
30 seconds (fixed).
14.Obstruction Alarm
 If the lock cannot be fully locked or unlocked, there will be
Obstruction Alarm.
15.Hard Reset and Factory PIN
 To hard reset, user needs to hold the CLEAR button and Privacy
lockout button together for 3 seconds.
 Unpaired product can be unlocked with Factory Pin code of
1234567890 (to test all buttons) followed by the Unlock Icon.
16.Connectivity
 Bluetooth 4.2 – Bluetooth Low Energy (BLE)
17.Volume Control
 Volume can be changed via Bluetooth
 10 levels
18.Keypad Security Lockout
 Security Lockout will be triggered if Incorrect pins are attempted for a
number of consecutive times.
 Keypad Security Lockout can be activated regardless of the lock
status.
 User is able to Enable and disable Security Lockout via BT
 User is able to configure 1 to 10 incorrect pins (default = 5)
 When “Security Lockout” is triggered 1st time:
 There will be siren for 30 seconds
 Keypad will not accept any pin codes for 1 minute
 When “Security Lockout ” is consecutively triggered 2nd time:
 There will be siren for 60 seconds
 Keypad will not accept any pin codes for 5 minutes
 When “Security Lockout” is consecutively triggered 3rd and
subsequent times:
 There will be siren for 90 seconds
 Keypad will not accept any pin codes for 10 minutes
 If Security Lockout Attempt is changed via Bluetooth, the number of
time security lockout is triggered will reset.
 Security Lockout can be deactivated by:
 After 1 / 5 / 10 minutes (depending)
 Any Bluetooth Unlock
 Unlock via Physical Key
 Unlock via Thumbturn
 When “Security Lockout” is deactivated (by any method, there will a
clear Audio indicator. Refer to “Audio and LED Indications” section
for details.
 During Security mode, single Flash White LED when keypad is
triggered.
19.Keypad Disabled Mode
 Keypad Disabled Mode can be activated by pressing the Function
button for 3 seconds and keypad will not accept any pin codes.
 Keypad Disabled Mode can be activated regardless of the lock status.
 When “Keypad Disabled Mode” is activated, there will be a clear
audio indicator. During Keypad Disabled Mode, double Flash White
LED when keypad is triggered.
 When “Keypad Disabled Mode” is activated, Auto Relock will not
function to eliminate the case where user will get locked out if auto
relock is allowed.
 Keypad Disabled Mode can be deactivated by:
 Holding on to Function button for 2 seconds
 Any Bluetooth Unlock
 Unlock by Physical Key
 Unlock by Thumbturn
20.Passage Mode
 When the lock is unlocked, Hold the Function button for 3 seconds to
activate Passage mode. When passage mode is activated, lock will
not relock when door is closed and keypad is disabled.
21.Access requirements
 Master BT Key
 Guest BT Key
 Master PIN
 Permanent PIN
 Duration PIN
 One Time PIN
 Recurring PIN
o Weekly PIN
o Monthly PIN
o Weekday PIN
o Weekend PIN
 Algo generated (7 to 9 digits)
 BT generated (4 to 6 digits)
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2019:02:25 11:40:34+08:00
Modify Date                     : 2019:02:25 12:10:06+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - user manual
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2019:02:25 12:10:06+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:6859ffdb-834c-4f48-aa53-c8d4d99e31ef
Instance ID                     : uuid:f76580e8-3ecb-47ff-845e-26fb88c59c63
Page Count                      : 7

EXIF Metadata provided by EXIF.tools