Illumina TR00144 TR-001-044 User Manual RFID Reader
Illumina, Inc. TR-001-044 RFID Reader
Illumina >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2043361 |
| Application ID | kUVFHsEJYPFTgd3Gi1zyGw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 22.16kB (276975 bits) |
| Date Submitted | 2013-08-15 00:00:00 |
| Date Available | 2014-02-11 00:00:00 |
| Creation Date | 2013-06-25 15:04:42 |
| Producing Software | Acrobat Distiller 10.1.5 (Windows) |
| Document Lastmod | 2013-06-25 15:16:47 |
| Document Title | RFID_Reader.book |
| Document Creator | FrameMaker 9.0 |
| Document Author: | ctillotson |
RFID Reader - Model # TR-001-44 User Guide Introduction Specifications FCC Compliance IC Compliance Conformité IC Precautions of Use Technical Assistance ILLUMINA PROPRIETARY Part # 15041950 Rev. A DRAFT June 2013 This document and its contents are proprietary to Illumina, Inc. and its affiliates (ʺIlluminaʺ), and are intended solely for the contractual use of its customer in connection with the use of the product(s) described herein and for no other purpose. This document and its contents shall not be used or distributed for any other purpose and/or otherwise communicated, disclosed, or reproduced in any way whatsoever without the prior written consent of Illumina. Illumina does not convey any license under its patent, trademark, copyright, or common‐law rights nor similar rights of any third parties by this document. The instructions in this document must be strictly and explicitly followed by qualified and properly trained personnel in order to ensure the proper and safe use of the product(s) described herein. All of the contents of this document must be fully read and understood prior to using such product(s). FAILURE TO COMPLETELY READ AND EXPLICITLY FOLLOW ALL OF THE INSTRUCTIONS CONTAINED HEREIN MAY RESULT IN DAMAGE TO THE PRODUCT(S), INJURY TO PERSONS, INCLUDING TO USERS OR OTHERS, AND DAMAGE TO OTHER PROPERTY. ILLUMINA DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE IMPROPER USE OF THE PRODUCT(S) DESCRIBED HEREIN (INCLUDING PARTS THEREOF OR SOFTWARE) OR ANY USE OF SUCH PRODUCT(S) OUTSIDE THE SCOPE OF THE EXPRESS WRITTEN LICENSES OR PERMISSIONS GRANTED BY ILLUMINA IN CONNECTION WITH CUSTOMERʹS ACQUISITION OF SUCH PRODUCT(S). © 2013 Illumina, Inc. All rights reserved. Illumina, IlluminaDx, BaseSpace, BeadArray, BeadXpress, cBot, CSPro, DASL, DesignStudio, Eco, GAIIx, Genetic Energy, Genome Analyzer, GenomeStudio, GoldenGate, HiScan, HiSeq, Infinium, iSelect, MiSeq, Nextera, NuPCR, SeqMonitor, Solexa, TruSeq, TruSight, VeraCode, the pumpkin orange color, and the Genetic Energy streaming bases are registered trademarks or trademarks of Illumina, Inc. All other brands and names contained herein are the property of their respective owners. The RFID Reader is a compact module designed for use within a host device for short range reading of high frequency (HF) tags. The module consists of a radio module, loop antenna, and a UART host interface on a single footprint of 40 mm x 40 mm x 6.5 mm. Figure 1 RFID Reader ‐ Model # TR‐001‐44 Figure 2 Host UART Interface Connections RFID Reader - Model # TR-001-44 User Guide Introduction Introduction Specifications Power Specification Input Voltage 2.7–5.5 VDC Supply Current 120 mA Environmental Specification Value Operating Temperature Storage Temperature Radio Frequency (RF) Specification RF Operating Frequency RF Output Power Value 0°C to 35°C (32°F t o 95°F) ‐20°C to 85°C (‐4°F t o 185°F) Value 13.56 MHz 200 mW Part # 15041950 Rev. A DRAFT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense. CAUTION Modifications to this unit not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules. NOTE The antennas used for this transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Host Device Labeling If the RFID Reader is not visible when installed in the host device, the host device must include one of the following exterior labels: Contains Transmitter Module FCC ID: ZWF‐TR00144 Contains FCC ID: ZWF‐TR00144 RFID Reader - Model # TR-001-44 User Guide FCC Compliance FCC Compliance Human Exposure to Radio Frequency This equipment complies with maximum permissible exposure (MPE) limits for the general population per Title 47 CFR § 1.1310 Table 1. This equipment complies with the limitations of human exposure to electromagnetic fields (EMFs) for devices operating within the frequency range 0 Hz to 10 GHz used in radio frequency identification (RFID) within an occupational or professional environment per EN 50364:2001 sections 4.0. Part # 15041950 Rev. A DRAFT This Class A digital apparatus meets all requirements of the Canadian Interference‐ Causing Equipment Regulations. This device complies with Industry Canada licence‐exempt RSS standards. Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (IC ID: 9859A‐TR00144) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. RFID Reader - Model # TR-001-44 User Guide IC Compliance IC Compliance Conformité IC Le dispositif numérique Classe A répond à toutes les exigences des Règlements canadiens sur le matériel brouilleur. Le présent appareil est conforme aux CNR dʹIndustrie Canada applicables aux appareils radio exempts de licence. Lʹexploitation est autorisée aux deux conditions suivantes : Lʹappareil ne doit pas produire de brouillage. Lʹutilisateur de lʹappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible dʹen compromettre le fonctionnement. Conformément à la réglementation dʹIndustrie Canada, le présent émetteur radio peut fonctionner avec une antenne dʹun type et dʹun gain maximal (ou inférieur) approuvé pour lʹémetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à lʹintention des autres utilisateurs, il faut choisir le type dʹantenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas lʹintensité nécessaire à lʹétablissement dʹune communication satisfaisante. Le présent émetteur radio (IC ID: 9859A‐TR00144) a été approuvé par Industrie Canada pour fonctionner avec les types dʹantenne énumérés ci‐dessous et ayant un gain admissible maximal et lʹimpédance requise pour chaque type dʹantenne. Les types dʹantenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour lʹexploitation de lʹémetteur. Part # 15041950 Rev. A DRAFT Read the following precautions before using the RFID Reader and card. Adhere to the precautions to avoid malfunctions and failures caused by misuse. Avoid using the RFID Reader in the presence of strong electomagnetic waves. The RFID Reader supplies power to the card or tag using an electromagnetic wave to communicate with the card or tag. The presence of strong electromagnetic waves affects communication between the RFID Reader and card or tag, causing reduced access area or inability to access the card. Test the RFID Reader using the actual power source in the installation location environment before use. Keep precision devices that might be affected by electromagnetic waves away from the RFID Reader. Because the RFID Reader constantly emits an electromagnetic wave of about 13.56 MHz, placing precision devices that might be affected by electromagnetic waves near the reader can cause malfunction or failure of the devices. When operating the reader, keep precision devices away from the RFID Reader. If such precision devices must be located near the RFID Reader, shield the precision devices with a metal cover and test the devices to check for any influence. Avoid using multiple RFID Readers in proximity to each other. The RFID Reader supplies power to the card or tag using an electromagnetic wave to communicate with the card or tag and constantly emits an electromagnetic wave of about 13.56 MHz. Using multiple readers in proximity to each other causes interference, interrupts communication between the card and reader, and prevents access to the card. Safety Information To maintain compliance with the FCC RF exposure guidelines, install and operate this equipment with a minimum distance of 20 cm between the radiator and your body. Use only with the supplied antenna. Unauthorized antenna, modification, or attachments can damage the transmitter and violate FCC regulations. RFID Reader - Model # TR-001-44 User Guide Precautions of Use Precautions of Use 10 Part # 15041950 Rev. A DRAFT For technical assistance, contact Illumina Customer Support. Table 1 Illumina General Contact Information Illumina Website http://www.illumina.com Email techsupport@illumina.com Table 2 Illumina Customer Support Telephone Numbers Region Contact Number Region Contact Number North America 1.800.809.4566 Italy 800.874909 Austria 0800.296575 Netherlands 0800.0223859 Belgium 0800.81102 Norway 800.16836 Denmark 80882346 Spain 900.812168 Finland 0800.918363 Sweden 020790181 France 0800.911850 Switzerland 0800.563118 Germany 0800.180.8994 United Kingdom 0800.917.0041 Ireland 1.800.812949 Other countries +44.1799.534000 MSDSs Material safety data sheets (MSDSs) are available on the Illumina website at http:// www.illumina.com/msds. Product Documentation Additional product documentation in PDF is available for download from the Illumina website. Go to http://www.illumina.com/support, select a product, and then click Documentation & Literature. RFID Reader - Model # XXX-XX User Guide Technical Assistance Technical Assistance Illumina San Diego, California 92122 U.S.A. +1.800.809.ILMN (4566) +1.858.202.4566 (outside North America) techsupport@illumina.com www.illumina.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : ctillotson Create Date : 2013:06:25 15:04:42Z Modify Date : 2013:06:25 15:16:47-07:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : FrameMaker 9.0 Metadata Date : 2013:06:25 15:16:47-07:00 Format : application/pdf Title : RFID_Reader.book Creator : ctillotson Producer : Acrobat Distiller 10.1.5 (Windows) Document ID : uuid:db78513c-9ff6-41b0-8564-b9afbe9a01e8 Instance ID : uuid:9eff1d3e-47ac-471b-9e9e-dde7028440ae Page Mode : UseOutlines Page Count : 12 Signing Date : 2013:06:25 15:16:47-07:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, ExportEXIF Metadata provided by EXIF.tools