Imation TDKA73 TDK WIRELESS BOOMBOX User Manual Usermanual

Imation Corp. TDK WIRELESS BOOMBOX Usermanual

Users Manual

Wireless BoomboxOPERATION63952712-AGENERAL:Power Source........DC 18V, 2A Adapter (Center Pos.)Power (DC) .........Internal NiMH rechargeable batteryDimensions .......... .17 (W) x 11.5 (H) x 4 (D) inchesWeight .. ....................................................... XXXlbs Speakers.........2 x 2 inch full-range drivers, 1 x 5.25.......inch subwoofer, 2 x 5.25 inch passive radiatorsThe TDK Life on Record Logo is a trademark of TDK Corporation and is used under license.All other trademarks and logos are property of their respective owners.Output Power ............. . 7W x 2 + 15W (subwoofer)Wireless Audio ...... Bluetooth version 2.1-A2DP profileLine-input Audio ................ 3.5mm stereo jack up to ...............................................2.5Vrms input signalUSB Port.............................5 V @ 2.1 A charge onlyRADIO SECTION:Frequency Range (FM)....................... 87.5-108MHzFrequency Range (AM) ..................... 530-1710KHzSPECIFICATIONS AND COMPATIBILITYTDKperformance.euA73User GuidePlease read these instructions completely before operating this productHeadphone Jack (Rear of Unit)For private listening, simply plug headphones into the Headphone jack Xon the rear of this unit. The speaker’s sound will be muted when headphones are inserted.AUX Jack (Rear of Unit)Insert one end of an audio cable (not included) into the LINE OUT jack on your external audio unit and the other end into the AUX jack Uon the rear of this unit. To listen to the external audio unit, turn this unit on and turn on the external unit as well. Press the Source/Select control x once so all the modes light. Rotate the Source/Select control xto the AUX position to select the Line In mode. Start playback of the external unit and the external audio unit’s output sound will be heard through this unit’s speakers. Turning the Unit On and Off:1. The main power switch is on the rear of the unit. Slide to the ON position to turn the unit on and activate the Power/Volume control on the main unit and the Power button on the remote. 2. Once the main power switch is turned on, you can turn the unit on or off by pressing the Power/Volume control v on the main unit. If using the remote, press the Power button am to turn the unit on. Press the OFF button al to turn the unit off.Pairing a Bluetooth Device1. Turn the unit on; the previously listened to source and volume will be selected.2. Press the Source/Select control x once so all the modes light. Rotate the Source/Select control xto the Bluetooth ( ) position to select the Bluetooth mode.3. Press and hold the Source/Select control xfor approximately 3 seconds until the Bluetooth indicator blinks quickly to make the speaker “discoverable”.4. On the bluetooth device, enable bluetooth and select “A73” from the Device List. If the bluetooth device asks for a passkey, use “0000”. Some bluetooth devices will ask you to accept the connection. If the units are paired properly, the speaker will beep and the Bluetooth indicator will light solid. If it failed, the Bluetooth indicator will blink slowly.Note: After you pair a device, this unit will remember it for future use.Using a Bluetooth Device1. Turn the unit on; the previously listened to source and volume will be selected.2. With a unit paired (see previous section), press the Source/Select control x once so all the modes light. Rotate the Source/Select control xto the Bluetooth ( )positionto select the Bluetooth mode.3. Operate your bluetooth device and its sound will be heard through this unit’s speakers.4. Adjust the volume using the Power/Volume control v on this unit, or the Volume AC CONNECTION / RECHARGING THE BATTERYLOCATION OF CONTROLSThis unit has a built-in rechargeable battery that will automatically be charged as long as the unit is plugged in. When charging, the Battery indicator will light red. When fully charged, the indicator will turn off.If the battery is low, the Battery indicator will fade in and out in a red hue. Note: The battery will provide approximately 6 hours of operation at 50% volume or 2 hours at 100% volume.1. Carrying Handle2. Power/Volume Control3. Display4. Source/Select Control5. Remote SensorNotes:t 0OMZVTFUIFTVQQMJFE"$BEBQUFSt 3FNPWFCPUIUIF%$QMVHBOE"$*/QMVHUPEJTDPOOFDU"$BEBQUFSXIFOOPUJOVTFt %JTDPOOFDUUIF"$DPSEUPVTFXJUI%$QPXFSSFDIBSHFBCMFCBUUFSZWireless BoomboxUS ACPlugShown1. Select the appropriate plug for your country and connect it to the AC power adapter.2. Connect the AC power adapter jack to the DC IN jack Won the rear of the unit and then connect the plug to a 100V-240V wall outlet.Rechargeable Battery Notes:t &BDIUJNFZPVDIBSHFBOE EJTDIBSHF UIF CBUUFSZDIBSHFDZDMFTCBUUFSZ DBQBDJUZslightly diminishes. Rechargeable batteries have a limited number of charge cycles and need to be replaced eventually.t :PVNBZXJTIUPSFQMBDFZPVSCBUUFSZXIFOPSCFGPSFUIFCBUUFSZEPFTOPUTVQQMZFOPVHIpower to operate your device. Also, proper disposal is essential from environmental and safety point of view. Putting any battery directly in the trash will harm the environment.t %POPUJODJOFSBUFReplacing the Remote Control Battery:1. Remove the Battery Compartment by pressing in on the tab and then sliding the compartment out.2. Install a CR2025 battery, paying attention to the polarity diagram in the compartment (positive side up).3. Replace the Battery Compartment.Replacing the Rechargeable Battery:If the battery does not supply enough power (see note in Rechargeable Battery Notes box below), replace the rechargeable battery as follows:1. Remove the screws on the bottom of the unit and remove the bottom plate.2. Unplug the rechargeable battery and replace with battery pack with the following specs, (xxxxx,xxxxx,xxxxx ADVISE SPECS)3. Replace the bottom plate and tighten the screws.2143512. OFF Button13. Power Button14. Bluetooth Button15. SEEK Buttons16. AUX Button17. FM Button18. AM Button19. Mute Button20. Volume Buttons21. Preset ButtonsLOCATION OF CONTROLS (CONTINUED)OFFAUXFMAM1234X13121416151718192021control on the Bluetooth device, and adjust the Bass and Treble as described later in this guide.5. To mute the sound, press the Mute button as on the remote control. IMPORTANT: After step 2, you have two minutes to pair the units.Charging a Bluetooth Device with this UnitOn the rear of this unit is a USB jack that can be connected to a USB device, which will charge if the unit is connected to AC power.Using the AM or FM Radio1. Rotate the Volume/Power control v to turn the unit on; the previously listened to source and volume will be selected.2. Press the Source/Select control x once so all the modes light. Rotate the Source/Select control xto the AM or FM position to select the radio mode.3. When AM or FM appears in the display, the unit is in Tuner mode, so use the Source/Select control x to select a station. If all the indicators appear around the Source/Select control, the unit is in Select mode; in this case press the Source/Select control xto make it operate as a tuning control.4. To have the unit automatically scan for the next strong station, press the SEEK Up or Down button ao on the remote control. 5. Adjust the volume using the Volume/Power control v and adjust the Bass and Treble as described later in this guide.6. To select another source, press the Source/Select control x to enter the Select mode and make it operate as a source selector. 7. To mute the sound, press the Mute button as on the remote control. AM Antenna: Insert the AM Antenna plug into the AM Antenna jack on the rear of the unit for best AM reception. Assemble the stand by rotating and inserting the tabs until they click.Setting the FM Presets1. Turn the unit on and select a station as described in steps 1 through 3 above.2. Press and hold the desired Preset button bk on the remote control for three seconds. The Preset number will blink three times in the display to confirm setting.3. To call up a preset, simply press and release the Preset number bk on the remote control.Changing the FM regionThis unit allows you to set the desired radio region as follows:With the power on, press and hold the Volume/Powervand Source/Selectxcontrolssimultaneously for at least four seconds to enter the radio region setting mode. Scroll through the menu using the Source/Select control x to select the desired region, then press the Source/Select x control to confirm. When finished, scroll using the Source/Select control x to select “EXIT”, then press the Source/Select control x.Region 1 – United States (87.5MHz to 108MHz)Region 2 – Europe (87.5MHz to 108MHz)Region 3 – Japan (76MHz to 108MHz)Setting the EQ and Bass1. Press the Source/Select control x once so all the modes light. Rotate the Source/Select control xto the BAS (Bass) or TRE (Treble) position.2. Adjust the setting using the Volume/Power control v.Note: If no setting has taken place for five seconds, the unit will exit the Bass/Treble setting mode and will revert to the previous mode.Auto Power OffIf the unit has no audio signal, and/or a USB device is not charging, for 20 minutes, the unit will turn itself off.Press one of the Mode buttons (Bluetooth, AUX, FM or AM) to access the respective mode.6. AUX Jack7. Main Power (OFF/ON) Switch8. DC IN Jack9. Headphone Jack10. AM Antenna Jack11. USB CHARGE Jack76810911Specifications are subject to change without notice.OPERATION (CONTINUED)Greg,The contact info is on the second page.
TDKperformance.euA73User GuidePlease read these instructions completely before operating this productWireless BoomboxTHIS WILL GO AT THE END OF THE MANUAL --------------------------Technical AssistanceAssistance techniqueTechnische HilfeTechnische assistentieAssistenza tecnicaAsistencia técnicaAssistência técnicaТехническая помощьPomoc technicznaTechnická pomocᢇ⾙ᨥᥴὤ㍔ 㫴㠄Vᡕ㸨ᬄᧉᡕᴄतࡾΊUS ....................................................................................................800-285-2783DE/AT/CH ...................................................................................+49 2131 226 311IT ...............................................................................................+39 022 1043 818ES/PT ...........................................................................................+34 900 993 166UK/IE......................................................................................+44 (0)1344 402201NL/Other EU ............................................................................ +31 (0)23 521 2605SG ....................................................................................................65-6499-7199AU/NZ .................................................................................................800-225-013JP.....................................................................................................0120-81-0536CN ................................................................................................8621-6121-2122KR.......................................................................................................02-2012-999HK...................................................................................................852-2161-2888Imation Enterprises Corp.1 Imation Way, Oakdale, MN 55128-3414 USA www.tdkperformance.comImation Europe B.V.Siriusdreef 46-522132 WT HoofddorpThe Netherlandswww.tdkperformance.euImation Singapore Pte. Ltd.Unit 02-02 New Tech Park 151 Lorong ChuanSingapore 556741www.tdk-media.com.sgImation ANZ Pty LtdUnit 2, 1 Coronation Avenue Kings Park, NSW 2148www.tdkperformance.com.auኁኾዙኔዄዐ㪹㆞↩䯍ᇽ㨀℻掌䂚廆◉䯭⸽ⓜ槡⼀ኇዙክወኰወZZZWGNPHGLDMS㊰㟞≰᧤ₙ䀆᧥㦘棟⏻⚇₼⦌ₙ䀆㈟㻖◉䁽䀆₼恾⚆䓀初浧⮶☵⸳ZZZLPDWLRQFRPFQ㊰㟞≰氨䂾㦘棟⏻⚇氨䂾▦屡喀䤖拢壮噾㑚ℳ㢢ㅲ⫃,,㦮ⷦ㲢ZZZLPDWLRQFRPKN늱넩ꐉ넩ꬍ뤉ꍡ껹7'./R5ꩡ꽺ꜵ꫑끭겑ꍽ붡霡뗲놹鶎ꖭ덵ꠁ點럪隕闒ꩶ鲩겙ZZZLPDWLRQFRNU

Navigation menu