Impex Fitness Me 709 Owners Manual PARTS LIST
Impex-Fitness-Me-709-Owner-S-Manual impex-fitness-me-709-owner-s-manual
2015-06-15
: Impex-Fitness Impex-Fitness-Me-709-Owners-Manual-746518 impex-fitness-me-709-owners-manual-746518 impex-fitness pdf
Open the PDF directly: View PDF
Page Count: 17
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 5
- EXPLODED DIAGRAM………………………………………………………………. 10
- PARTS LIST...................................................................................................… 11 COMPUTER................................................................................................…… 12
- WARRANTY.................................................................................................…. 16
- ORDERING PARTS.....................................................................................….. 16
- Part# Description Identifier
- ASSEMBLY INSTRUCTION
- Attach the Seat Support (#25) to bracket on the Sliding Frame (#26). Secure it with two M8 x 2 ¾” Hex Bolts (#31), two Ø 5/8” Washers (#27), and two M8 Aircraft Nuts (#33).
- Attach the Backrest Board (#28) to the Seat Support. Secure it with four M8 x 5/8” Allen Bolts (#8) and four Ø 5/8” Washers (#27).
- Attach the Seat Pad (#32) to the Seat Support. Secure it with four M8 x 5/8” Allen Bolts (#8) and four Ø 5/8” Washers (#27).
- Pull up the Quick Release Knob (#24), slide the Sliding Frame to desired position, and release the Knob to lock the Seat in position.
- Attach the Handle (#22) to the Seat Support (#25). Secure it with two M8 x 2 ¾” Hex Bolts (#31), two Ø 5/8 Washers (#27), and two M8 Aircraft Nuts (#33).
- Connect Upper Computer Wire (#10) to the wire on the Computer. Remove the two M5 x 3/8” Philips Screws (#3) from Computer. Slide the Computer onto the bracket on Front Post. Secure it with the two Screws.
- Thread the left Pedal (#17L) Counterclockwise into the left Crank #21). Thread the right Pedal (#17R) Clockwise into the Crank on the other side.
- 24 Quick Release Knob 1
- ASSEMBLY INSTRUCTION
- CURRENT SPEED