Impex Fitness Mwb 500 Owners Manual PARTS LIST
Impex-Fitness-Mwb-500-Owner-S-Manual impex-fitness-mwb-500-owner-s-manual
2015-06-15
: Impex-Fitness Impex-Fitness-Mwb-500-Owners-Manual-746832 impex-fitness-mwb-500-owners-manual-746832 impex-fitness pdf
Open the PDF directly: View PDF
Page Count: 10
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE IDENTIFIER.....…....................................................................…. 3
- ASSEMBLY INSTRUCTIONS........................................................................…. 4
- EXPLODED DIAGRAM………………………………………………………………. 7
- PARTS LIST...............................................................................................……. 8
- WARRANTY.................................................................................................…. 9
- ORDERING PARTS.......................................................................................… 9
- ASSEMBLY INSTRUCTION
- Insert the Leg Developer Holder (#7) into the top opening on the Main Seat Support (#1). Thread a ½” Philips Screw to secure the sleeve on the Leg Developer Holder. Secure the Leg Developer with a M12 Lock Knob (#36).
- Attach the Leg Developer (#9) to the Leg Developer Holder. Secure it with an Axle (#46), two M10 x 5/8” Allen Bolts (#39) and ( ¾” Washers (#41).
- Insert one Foam Tube (#12) halfway through the hole on the Leg Developer Holder. Insert two Foam Tubes halfway through the holes on the Leg Developer (#9). Push six Foam Rolls (#16) onto the Tubes from both ends. Plug six (2 ½” End Caps to the end of th
- Attach the Olympic Sleeve (#23) onto the weight post on the Leg Developer. Attach a ( 2” Spring Clip (#26) to the Sleeve.
- 20 ( 2 ½” End Cap 6