Intech Electronics CS8110 Bluetooth Car Kit User Manual MCB 8110010 0A A

In Tech Electronics Ltd Bluetooth Car Kit MCB 8110010 0A A

UserManual.wiki >

Intech Electronics >

CS8110 User Manual >

Contents

Manual

7810965II-14 Adjust the Speaker VolumeII-15 Turn off the Hands-free Car KitII-16 Auto connection to the Mobile PhoneWhile a call is in session, pressing and releasing “Volume Up” will increasethe speaker volume, and pressing and releasing “ Volume Down ” willdecrease the speaker volume. A double tone will be heard whenever thevolume limit is reachedWhen the hands-free Car Kit is on, press and hold “On/Off ” for 5 seconds. Along tone will indicate that the Car Kit starts to power off. LED continues toflash for a few seconds. At last LED will turn off and the Car Kit is poweredoff.The Car Kit has already been paired with a Bluetooth mobile phone. If it isturned off and turned back on again, it will search for available Bluetoothlink. If the previously paired mobile phone’s Bluetooth feature is on, theCar Kit and the mobile phone will re-establish the Bluetooth linkautomatically..Bluetooth1 Tomuteacall2 Toun-muteacall2.2 Put through the callAfter the beep tone on the hands - free Car Kit, you can make a voicedial and the call will be connected in a few seconds.During the active call in session if another call is coming, pressing“VolumeDown” for 2 seconds will make the mobile phone switch to the waiting calland place the active call on hold. Press “Volume Down” for 2 secondsagain, mobile phone will come back to the first active call.Press Volume Up for about 2 seconds and a beep tone will indicate themicrophone is muted. A periodic reminder tone will be heard while the mutefunction is active.When the microphone is muted, press Volume Up for about 2 seconds.Then the mute function will end and the periodic reminder tone will stop.While a call is in session on the hands-free Car Kit, press “ On / Off ” and youwill disconnect the call. A long tone will indicate that the call has endedAfter the call is disconnected, the blue LED will flash normally.When the hands -free Car Kit is ringing, press “On/Off ” for 2 seconds.Ringing will stop and a long tone will indicate that the call is rejected.To redial the last dialed number, press “ Volume Down” for 2 seconds whenthe Car Kit is standby, a beep tone will indicate an attempt to redial.II-9 Answer the call waitingII-10 Mute the MicrophoneII-11 End a CallII-12 Reject a CallII-13 Redial Last Dialed Number.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate thisequipment.In-Tech declares that CS8110 (FCC ID: NV6-CS8110) is limited in CH1~CH11for 2.4 GHz by specified firmware controlled in U.S.A.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operatedwith minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.,Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one of the following measures:II-6 Answer an Incoming CallII-7 Transfer Calls between This Hands-free Car Kit and YourPhoneII-8 Make a New Call by Using Voice DialingWhen an incoming call is present, the hands-free Car Kit will ring. Press “On/ Off ” and you can answer the call. The blue LED will continue to flash oncea second while the call is in session.When you are in session, calls can be transferred from your Phoneto the hands-free Car Kit and vice versa.1 From Phone to the Car KitPress “On / Off ” once, the call will be transferred to the Car Kit.2 From Car Kit to the PhonePlease follow the operation manual of your phone.1.1 Press “On / Off ” on the hands-free Car Kit shortly when the Car Kit isstandby.1.2 Put through the callAfter the beep tone on the hands - free Car Kit, you can make a voicedial by saying the name of the person on the hands-free Car Kit. Thecall will be connected in a few seconds.2.1 Press “On / Off ” on the hands-free Car Kit shortly when the Car Kit isstandby.BluetoothBluetoothBluetoothBluetooth1 When using a Mobile Phone:2 When using a mobile phone without built-in and requiring adongle:BluetoothBluetoothBluetoothNote: Make sure that the voice dialing function is properly set up in themobile phone and it is within the range of the hands-free Car Kit.Note: Make sure that the voice dialing function is properly set up in theMobile phone and it is within the range of the hands-free Car Kit.2 Put your mobile phone in pairing mode3 Pair the hands-free Car Kit with your Mobile PhoneBluetoothBluetooth2.1 Follow the operation manual of your mobile phone to start thepairing process. Typically, this has to be done by going to a setup orconnect menu and then selecting the options to discoverdevices. may take several seconds to establish a connection.2..2 Your phone's display will indicate that it has found the new device “BT70P ”. When you want to pair it, the phone's display would demand apasskey or PIN, then you can enter a sequence of “0000”.The blue LED of hands-free Car Kit will flash every 3 seconds indicatingsuccessful pairing. The phone may also ask whether you want to change theCar Kit's name. We recommend you should approve the name of “BT 70P ”and do not change it..After pairing, the mobile phone should have “connect” menu. Please select it toestablish the link. A beep tone will indicate that the Car Kit is connected. Nowyou are ready to make and answer calls on the hands-free Car Kit.Insert the microphone plug into the external microphone socket as shown inFig. 2.BluetoothBluetoothBluetoothNote: Make sure if pairing does not occur as expected, turn off the hands-freecar kit and your phone, then wait for 10 seconds. Turn on them again andrepeat from Step 1 to Step 3Note: For other phones, please follow their operation manuals to establish theII-4 Establish LinkII-5 External MicrophoneBluetoothlink!(please refer to Fig.2 )III.IV.Maintenance and Safe UseAccessory◎◎◎Use dry cloth to clean hands-free car kit!Do not expose the car kit to liquid or moisture!Do not expose the car kit to fire or open flames!External Microphone (Provided)Note:BQB, CE and FCC approvedThe word mark and logos are owned by the SIG, Inc.And any use of such marks by In-Tech Electronics Ltd is under license. Othertrademarks and trade names are those of their respective owners.Bluetooth BluetoothBluetooth functions and operations may not be available or may varydepending on different mobile phones.