Intech Electronics CS8112 Bluetooth Car Kit User Manual 8112 77P Abe Logo

In Tech Electronics Ltd Bluetooth Car Kit 8112 77P Abe Logo

User manual

324I-2 FunctionI-2-1 On/OffI-2-2 Volume UpI-2-3 Volume DownI-2-4 LEDI-2-5 DC SocketI-2-6 MicrophoneI-2-7 SpeakerI-2-8 Battery Door(please refer to Fig.1)If you press “On/Off ”, you can:Switch on and OffPairAnswer a new callReject a callMake a new call using voice dialingIncrease the speaker volumeTo mute/un-mute the microphoneRedial the last dialed numberDecrease the speaker volumeAnswer call waitingThere are two LED colors (blue and red) to indicate the state of thisCar-KitIt serves as a recharging power socket for rechargeable batteries orsupplies the power to the Car Kit when the car charger is connectedto your car.Loading and unloading rechargeable batteries by opening thebattery Door.◎◎◎◎◎◎◎◎◎◎.Built-inIt allows you and your friend at far end to communicate with qualityvoice.I-2-9 Visor ClipClip the hands-free ar it under your car's sun visorCK .II. How to UseII-1 Charge the BatteriesII-2 Turn on the Hands-free Car Kit(.)please refer to Fig 2Before you use for the first time, please charge the batteries for 6 hours.After the first time, you can fully charge your low batteries in 4 hours.If the Hands-free Car Kit is powered off, press and hold “On/Off ” for 2seconds. A long tone will indicate that the hands-free Car Kit has turnedon. At the same time, blue LED will flash for a second. And then, blueLED will keep on flashing every 3 seconds.Thank you for buying the BT 77P, Hands-free Car Kit.BluetoothWarning Use only rechargeable batteries:.Fig.2Fig.3I. Profile and Its Function…………………………………………………………………………1I-1 Profile………………………………………………………………………………………1I-2 Function……………………………………………………………………………………2II. How to Use ………………………………………………………………………………………3II-1 Charge the Batteries……………………………………………………………………3II-2 Turn on the Hands-free Car Kit………………………………………………………3II-3 Pair the Hands-free Car Kit with Your Mobile Phone…………………4II-4 Establish Link………………………………………………………..………5II-5 Clip the Hands-free Car Kit under Your Sun Visor …………………………………5II-6 Answer an Incoming Call………………………………………………………………6II- Transfer Calls between This Hands-free Car Kit and Your Phone…..6II-8 Make a New Call by Using Voice Dialing……………………………………………6II- 9 …...…………………………………………………….…7II-10 Mute the Microphone……...………………………………………………………….…7II-11 End a Call……………………………………………………………………….…………7II-12 Reject a Call……………………………………………………………………..………7II-13 Redial Last Dialed Number……………………………………………………………7II-14 Adjust the Speaker Volume…………………………………………………….………8II-15 Recharge the Low Batteries…………………………………………………..………8II-16 Turn off the Hands-free Car Kit…………………………………………………………8II-17 VoIP with USB Dongle…………………………………………………………………9II-18 Auto connection to the Mobile Phone…………………………………10II-19 Auto power off…………………………………………………………………………10III. Maintenance and Safe Use …..........………………………………………………………10IV. Electrical Power Specification of Car Charger / AC Power Adaptor for BT 77P....…..10V. Package Contents ...........…..………………………………………………………………11FCC Interference statement ………………………………………………………………………12BluetoothBluetoothBluetoothBluetooth7Answer the call waitingTable of ContentII-3 Pair the Hands-free Car Kit with Your Mobile PhoneII-3-1 Put the hands-free Car Kit in pairing modeII-3-2 Put your Mobile Phone in pairing modeII-3-3 Pair the hands-free Car Kit with your Mobile PhoneBluetoothBluetoothBluetoothWhen the hands-free Car Kit is powered off, press and hold“On/Off ” for 5 seconds. In the first 2 seconds, a long tone willindicate that the hands-free Car Kit has turned on. At the sametime, blue LED will flash for a second. At the end of 5 seconds, adouble tone will be heard. Then the red and blue LEDs will flashalternatively, which indicates the hands-free Car Kit has enteredinto the pairing mode.II-3-2-1 Follow the operation manual of your mobilephone to start the pairing process. Typically, this has to be doneby going to a setup or connect menu and then selecting the optionsto discover devices. may take severalseconds to establish a connection.II-3-2-2 Your phone's display will indicate that it has found the newdevice “BT 77P”. When you want to pair it, the phone's displaywould demand a passkey or PIN, then you can enter a sequence of“0000”.The blue LED of hands- free Car Kit will flash every 3 secondsindicating successful pairing. The phone may also ask whetheryou want to change the Car Kit's name. We recommend youshould approve the name of “BT 77P” and do not change it.Note: Make Sure the batteries are fully chargedNote: Make sure if pairing does not occur as expected, turn off thehands-free Car Kit and your phone, then wait for 10 seconds.Turn on them again and repeat from Step 3-1 to Step3-3.BluetoothBluetooth Bluetooth.II-4 Establish LinkII-5 Clip the Hands-free Car Kit onto Your Sun VisorBluetoothAfter pairing, the mobile phone should have “connect” menu. Please selectit to establish the link. A beep tone will indicate that the Car Kit isconnected. Now you are ready to make and answer calls on the hands-freeCar Kit.(Please refer to Fig. 3)Note: For other phones, please follow their operation manuals to establishthe link!76II-6 Answer an Incoming CallII- Transfer Calls between This Hands-free Car Kit and YourPhoneV-7-1V-7-2II-8 Make a New Call by Using Voice DialingII-8-1 When using a Mobile Phone:II-8-2 When using a mobile phone without built-in andrequiring a dongle:When an incoming call is present, the hands-free Car Kit will ring. Press“On/Off ” and you can answer the call. The blue LED will continue to flashonce a second while the call is in session.When you are in session, calls can be transferred from yourphone to the hands-free Car Kit and vice versa.From phone to the Car KitPress “On/Off ” once, the call will be transferred to the Car Kit.From Car Kit to the PhonePlease follow the operation manual of your phone.II-8-1-1 Press “On/Off ” on the hands-free Car Kit shortly when theCar Kit is standby.II-8-1-2 Put through the callAfter the beep tone on the hands-free Car Kit, you can make a voicedial by saying the name of the person on the hands-free Car Kit. Thecall will be connected in a few seconds.II-8-2-1Press “On/Off ” on the hands-free Car Kit shortly when theCar Kit is standby.7 BluetoothBluetoothBluetoothBluetoothBluetoothBluetoothBluetoothNote: Make sure that the voice dialing function is properly set up inthe mobile phone and it is within the range of the hands-free Car Kit.Note:Make sure that the voice dialing function is properly set up inthe Mobile phone and it is within the range of the hands-free Car Kit.II-8-2-2 Put through the callAfter the beep tone on the hands-free Car Kit, you can make a voicedial and the call will be connected in a few seconds.During the active call in session if another call is coming, press “VolumeDown” for 2 seconds will make the mobile phone switch to the waiting calland place the active call on hold. Press “Volume Down” for 2 secondsagain, mobile phone will come back to the first active call.Press“Volume Up” for 2 seconds and a beep tone will indicate themicrophone is muted. A periodic reminder tone will be heard whilethe mute function is active.When the microphone is muted, press “Volume Up” for 2 seconds.Then the mute is released and the periodic reminder tone willstop.While a call is in session on the hands-free Car Kit, press “On/Off ” andyou will disconnect the call. A long tone will indicate that the call hasended. After the call is disconnected, the blue LED will flash normally.When the hands-free Car Kit is ringing, press “On/Off ” for 2 seconds.Ringing will stop and a long tone will indicate that the call is rejected.To redial the last dialed number, press “Volume Down ” for 2 secondswhen the Car Kit is standby. A beep tone will indicate an attempt toredial.II-9 Answer the call waitingII-10 Mute the MicrophoneII-10-1 To mute a callII-10-2 To un-mute a callII-11 End a CallII-12 Reject a CallII-13 Redial Last Dialed Number1I Profile and Its Function.I-1 Profile (Fig.1)1. Volume Down2. Volume Up3. On/Off4. DC Socket5. Microphone153247986Fig. 16. LED7. Speaker8. Battery Door9. Visor Clip5EnvironmentalfriendlyCar chargerBluetooth®Hands-free Car KitCS8112 (BT 77P)User ManualTMCS8112 / Abe
V Package Contents.Accessories Status3AABatteriesxRechargeableProvidedProvided1 Car ChargerxWarning: Use only rechargeable batteries.8111210II-14 Adjust the Speaker VolumeII-15 Recharge the Low BatteriesII-15-1 During rechargingII-15-2 Fully chargedII-16 Turn off the Hands-free Car KitWhile a call is in session, pressing and releasing “Volume Up” willincrease the speaker volume, and pressing and releasing “VolumeDown ” will decrease the speaker volume. A double tone will be heardwhenever the volume limit is reached.(please refer to Fig.2)The LED of this Car Kit will flash red instead of blue when the batteryare low. There will also be a tone every 2 minutes. Please connect thecharger cable to the Car Kit.The LED shows a steady red light if the Car Kit is off,and the red light will dim once every 3 second while the Car Kit is on.A steady blue LED represents the Car Kit is off and fully charged.And a blue LED dims once every 3 seconds while the Car Kit is on andfully charged.When the hands-free Car Kit is on, press and hold “On/Off ” for 5seconds. A long tone will indicate that the Car Kit starts to power off.LED continues to flash for a few seconds. At last LED will turn off andthe Car Kit is powered off.Note: When the battery level is too low, the hands-free Car Kit willautomatically power off. It cannot be powered on again unless thebatteries are sufficiently charged.II-18 Auto connection to the Mobile PhoneII-19 Auto power offIII. Maintenance and Safe UseIV Electrical Power Specification of Car Charger / AC Power Adaptor forBT 77PBluetoothThe Car Kit has already been paired with a Bluetooth mobile phone. Ifit is turned off and turned on again, it will search for availableBluetooth link. If the previously paired mobile phone’s Bluetoothfeature is on, the Car Kit and the mobile phone will re-establish theBluetooth link automatically.In order to save power, the Car Kit will turn off automatically after it isdisconnected from the Bluetooth link for an hour.Use dry cloth to clean hands-free Car Kit!Recycle the batteries after their life time!Do not expose the Car Kit to liquid or moisture!Do not expose the Car Kit to fire or open flames!The electrical power specification of car charger / AC adaptor for BT 77PBluetooth Car Kit is as follows:Output: 5V 1.0AOutput pin configuration:◎◎◎◎.Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate thisequipment.----IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operatedwith minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.13II-17 VoIP with USB DonglePlug a USB Bluetooth Dongle into your computer, follow the pairing andconnecting procedure to link up your Car Kit. Once it is properly set up usingthe VoIP function, you can use the Car Kit as a speaker phone to enjoywireless telephone conversation with your friends. Your Car Kit can be usedin car, or conveniently be used as a speaker conferencing unit in the officeor at home any time.USB Bluetooth dongle9Disclaimer:Talk time and stand-by time of the Car Kit will vary depending onmobile phone model being used.Note:BQB, CE and FCC approveThe word mark and logos are owned by the SIG, Inc. andany use of such marks by In-Tech Electronics Ltd. is under license. Othertrademarks and trade names are those of their respective owners.BluetoothBluetooth BluetoothdBluetooth functions and operations may not be available or may vary dependingon different mobile phones.5V 1.0ANCGround2.5mm11 0.5mm

Navigation menu