Intech Electronics CS8112 Bluetooth Car Kit User Manual 8112 77P Abe Logo
In Tech Electronics Ltd Bluetooth Car Kit 8112 77P Abe Logo
User manual
3
2
4
I-2 Function
I-2-1 On/Off
I-2-2 Volume Up
I-2-3 Volume Down
I-2-4 LED
I-2-5 DC Socket
I-2-6 Microphone
I-2-7 Speaker
I-2-8 Battery Door
(please refer to Fig.1)
If you press “On/Off ”, you can:
Switch on and Off
Pair
Answer a new call
Reject a call
Make a new call using voice dialing
Increase the speaker volume
To mute/un-mute the microphone
Redial the last dialed number
Decrease the speaker volume
Answer call waiting
There are two LED colors (blue and red) to indicate the state of this
Car-Kit
It serves as a recharging power socket for rechargeable batteries or
supplies the power to the Car Kit when the car charger is connected
to your car.
Loading and unloading rechargeable batteries by opening the
battery Door.
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
.
Built-in
It allows you and your friend at far end to communicate with quality
voice.
I-2-9 Visor Clip
Clip the hands-free ar it under your car's sun visorCK .
II. How to Use
II-1 Charge the Batteries
II-2 Turn on the Hands-free Car Kit
(.)please refer to Fig 2
Before you use for the first time, please charge the batteries for 6 hours.
After the first time, you can fully charge your low batteries in 4 hours.
If the Hands-free Car Kit is powered off, press and hold “On/Off ” for 2
seconds. A long tone will indicate that the hands-free Car Kit has turned
on. At the same time, blue LED will flash for a second. And then, blue
LED will keep on flashing every 3 seconds.
Thank you for buying the BT 77P, Hands-free Car Kit.Bluetooth
Warning Use only rechargeable batteries:.
Fig.2
Fig.3
I. Profile and Its Function…………………………………………………………………………1
I-1 Profile………………………………………………………………………………………1
I-2 Function……………………………………………………………………………………2
II. How to Use ………………………………………………………………………………………3
II-1 Charge the Batteries……………………………………………………………………3
II-2 Turn on the Hands-free Car Kit………………………………………………………3
II-3 Pair the Hands-free Car Kit with Your Mobile Phone…………………4
II-4 Establish Link………………………………………………………..………5
II-5 Clip the Hands-free Car Kit under Your Sun Visor …………………………………5
II-6 Answer an Incoming Call………………………………………………………………6
II- Transfer Calls between This Hands-free Car Kit and Your Phone…..6
II-8 Make a New Call by Using Voice Dialing……………………………………………6
II- 9 …...…………………………………………………….…7
II-10 Mute the Microphone……...………………………………………………………….…7
II-11 End a Call……………………………………………………………………….…………7
II-12 Reject a Call……………………………………………………………………..………7
II-13 Redial Last Dialed Number……………………………………………………………7
II-14 Adjust the Speaker Volume…………………………………………………….………8
II-15 Recharge the Low Batteries…………………………………………………..………8
II-16 Turn off the Hands-free Car Kit…………………………………………………………8
II-17 VoIP with USB Dongle…………………………………………………………………9
II-18 Auto connection to the Mobile Phone…………………………………10
II-19 Auto power off…………………………………………………………………………10
III. Maintenance and Safe Use …..........………………………………………………………10
IV. Electrical Power Specification of Car Charger / AC Power Adaptor for BT 77P....…..10
V. Package Contents ...........…..………………………………………………………………11
FCC Interference statement ………………………………………………………………………12
Bluetooth
Bluetooth
Bluetooth
Bluetooth
7
Answer the call waiting
Table of Content
II-3 Pair the Hands-free Car Kit with Your Mobile Phone
II-3-1 Put the hands-free Car Kit in pairing mode
II-3-2 Put your Mobile Phone in pairing mode
II-3-3 Pair the hands-free Car Kit with your Mobile Phone
Bluetooth
Bluetooth
Bluetooth
When the hands-free Car Kit is powered off, press and hold
“On/Off ” for 5 seconds. In the first 2 seconds, a long tone will
indicate that the hands-free Car Kit has turned on. At the same
time, blue LED will flash for a second. At the end of 5 seconds, a
double tone will be heard. Then the red and blue LEDs will flash
alternatively, which indicates the hands-free Car Kit has entered
into the pairing mode.
II-3-2-1 Follow the operation manual of your mobile
phone to start the pairing process. Typically, this has to be done
by going to a setup or connect menu and then selecting the options
to discover devices. may take several
seconds to establish a connection.
II-3-2-2 Your phone's display will indicate that it has found the new
device “BT 77P”. When you want to pair it, the phone's display
would demand a passkey or PIN, then you can enter a sequence of
“0000”.
The blue LED of hands- free Car Kit will flash every 3 seconds
indicating successful pairing. The phone may also ask whether
you want to change the Car Kit's name. We recommend you
should approve the name of “BT 77P” and do not change it.
Note: Make Sure the batteries are fully charged
Note: Make sure if pairing does not occur as expected, turn off the
hands-free Car Kit and your phone, then wait for 10 seconds.
Turn on them again and repeat from Step 3-1 to Step3-3
.
Bluetooth
Bluetooth Bluetooth
.
II-4 Establish Link
II-5 Clip the Hands-free Car Kit onto Your Sun Visor
Bluetooth
After pairing, the mobile phone should have “connect” menu. Please select
it to establish the link. A beep tone will indicate that the Car Kit is
connected. Now you are ready to make and answer calls on the hands-free
Car Kit.
(Please refer to Fig. 3)
Note: For other phones, please follow their operation manuals to establish
the link!
7
6
II-6 Answer an Incoming Call
II- Transfer Calls between This Hands-free Car Kit and Your
Phone
V-7-1
V-7-2
II-8 Make a New Call by Using Voice Dialing
II-8-1 When using a Mobile Phone:
II-8-2 When using a mobile phone without built-in and
requiring a dongle:
When an incoming call is present, the hands-free Car Kit will ring. Press
“On/Off ” and you can answer the call. The blue LED will continue to flash
once a second while the call is in session.
When you are in session, calls can be transferred from your
phone to the hands-free Car Kit and vice versa.
From phone to the Car Kit
Press “On/Off ” once, the call will be transferred to the Car Kit.
From Car Kit to the Phone
Please follow the operation manual of your phone.
II-8-1-1 Press “On/Off ” on the hands-free Car Kit shortly when the
Car Kit is standby.
II-8-1-2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice
dial by saying the name of the person on the hands-free Car Kit. The
call will be connected in a few seconds.
II-8-2-1Press “On/Off ” on the hands-free Car Kit shortly when the
Car Kit is standby.
7 Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Note: Make sure that the voice dialing function is properly set up in
the mobile phone and it is within the range of the hands-free Car Kit.
Note:Make sure that the voice dialing function is properly set up in
the Mobile phone and it is within the range of the hands-free Car Kit.
II-8-2-2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice
dial and the call will be connected in a few seconds.
During the active call in session if another call is coming, press “Volume
Down” for 2 seconds will make the mobile phone switch to the waiting call
and place the active call on hold. Press “Volume Down” for 2 seconds
again, mobile phone will come back to the first active call.
Press“Volume Up” for 2 seconds and a beep tone will indicate the
microphone is muted. A periodic reminder tone will be heard while
the mute function is active.
When the microphone is muted, press “Volume Up” for 2 seconds.
Then the mute is released and the periodic reminder tone will
stop.
While a call is in session on the hands-free Car Kit, press “On/Off ” and
you will disconnect the call. A long tone will indicate that the call has
ended. After the call is disconnected, the blue LED will flash normally.
When the hands-free Car Kit is ringing, press “On/Off ” for 2 seconds.
Ringing will stop and a long tone will indicate that the call is rejected.
To redial the last dialed number, press “Volume Down ” for 2 seconds
when the Car Kit is standby. A beep tone will indicate an attempt to
redial.
II-9 Answer the call waiting
II-10 Mute the Microphone
II-10-1 To mute a call
II-10-2 To un-mute a call
II-11 End a Call
II-12 Reject a Call
II-13 Redial Last Dialed Number
1
I Profile and Its Function.
I-1 Profile (Fig.1)
1. Volume Down
2. Volume Up
3. On/Off
4. DC Socket
5. Microphone
1
5
3
2
4
7
9
8
6
Fig. 1
6. LED
7. Speaker
8. Battery Door
9. Visor Clip
5
Environmental
friendly
Car charger
Bluetooth®Hands-free Car Kit
CS8112 (BT 77P)
User Manual
TM
CS8112 / Abe
V Package Contents.
Accessories Status
3AA
Batteries
x
Rechargeable
Provided
Provided
1 Car Chargerx
Warning: Use only rechargeable batteries.
811
12
10
II-14 Adjust the Speaker Volume
II-15 Recharge the Low Batteries
II-15-1 During recharging
II-15-2 Fully charged
II-16 Turn off the Hands-free Car Kit
While a call is in session, pressing and releasing “Volume Up” will
increase the speaker volume, and pressing and releasing “Volume
Down ” will decrease the speaker volume. A double tone will be heard
whenever the volume limit is reached.
(please refer to Fig.2)
The LED of this Car Kit will flash red instead of blue when the battery
are low. There will also be a tone every 2 minutes. Please connect the
charger cable to the Car Kit.
The LED shows a steady red light if the Car Kit is off,
and the red light will dim once every 3 second while the Car Kit is on.
A steady blue LED represents the Car Kit is off and fully charged.
And a blue LED dims once every 3 seconds while the Car Kit is on and
fully charged.
When the hands-free Car Kit is on, press and hold “On/Off ” for 5
seconds. A long tone will indicate that the Car Kit starts to power off.
LED continues to flash for a few seconds. At last LED will turn off and
the Car Kit is powered off.
Note: When the battery level is too low, the hands-free Car Kit will
automatically power off. It cannot be powered on again unless the
batteries are sufficiently charged.
II-18 Auto connection to the Mobile Phone
II-19 Auto power off
III. Maintenance and Safe Use
IV Electrical Power Specification of Car Charger / AC Power Adaptor for
BT 77P
Bluetooth
The Car Kit has already been paired with a Bluetooth mobile phone. If
it is turned off and turned on again, it will search for available
Bluetooth link. If the previously paired mobile phone’s Bluetooth
feature is on, the Car Kit and the mobile phone will re-establish the
Bluetooth link automatically.
In order to save power, the Car Kit will turn off automatically after it is
disconnected from the Bluetooth link for an hour.
Use dry cloth to clean hands-free Car Kit!
Recycle the batteries after their life time!
Do not expose the Car Kit to liquid or moisture!
Do not expose the Car Kit to fire or open flames!
The electrical power specification of car charger / AC adaptor for BT 77P
Bluetooth Car Kit is as follows:
Output: 5V 1.0A
Output pin configuration:
◎
◎
◎
◎
.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
-
-
-
-
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
13
II-17 VoIP with USB Dongle
Plug a USB Bluetooth Dongle into your computer, follow the pairing and
connecting procedure to link up your Car Kit. Once it is properly set up using
the VoIP function, you can use the Car Kit as a speaker phone to enjoy
wireless telephone conversation with your friends. Your Car Kit can be used
in car, or conveniently be used as a speaker conferencing unit in the office
or at home any time.
USB Bluetooth dongle
9
Disclaimer:
Talk time and stand-by time of the Car Kit will vary depending on
mobile phone model being used.
Note:
BQB, CE and FCC approve
The word mark and logos are owned by the SIG, Inc. and
any use of such marks by In-Tech Electronics Ltd. is under license. Other
trademarks and trade names are those of their respective owners.
Bluetooth
Bluetooth Bluetooth
d
Bluetooth functions and operations may not be available or may vary depending
on different mobile phones.
5V 1.0A
NC
Ground
2.5mm
11 0.5mm