Intech Electronics CS8112 Bluetooth Car Kit User Manual 8112 77P Abe Logo

In Tech Electronics Ltd Bluetooth Car Kit 8112 77P Abe Logo

User manual

Download: Intech Electronics CS8112 Bluetooth Car Kit User Manual 8112  77P Abe Logo
Mirror Download [FCC.gov]Intech Electronics CS8112 Bluetooth Car Kit User Manual 8112  77P Abe Logo
Document ID747788
Application IDDQB/hNniZB9REGHgFDnWDw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize31.48kB (393469 bits)
Date Submitted2007-01-16 00:00:00
Date Available2007-01-16 00:00:00
Creation Date2006-12-01 17:29:56
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2007-01-16 14:23:58
Document Title8112 User Manual 77P Abe Logo...
Document CreatorPScript5.dll Version 5.2
Document Author: kefenchen

CS8112 / Abe
I-2
TM
®
Bluetooth Hands-free Car Kit
CS8112 (BT 77P)
User Manual
Environmental
friendly
Function (please refer to Fig.1)
I-2-1 On/Off
If you press “On/Off ”, you can:
◎ Switch on and Off
◎ Pair
◎ Answer a new call
◎ Reject a call
◎ Make a new call using voice dialing
I-2-2 Volume Up
◎ Increase the speaker volume
◎ To mute/un-mute the microphone
I-2-3 Volume Down
◎ Redial the last dialed number
◎ Decrease the speaker volume
◎ Answer call waiting
I-2-4 LED
There are two LED colors (blue and red) to indicate the state of this
Car-Kit .
I-2-5 DC Socket
It serves as a recharging power socket for rechargeable batteries or
supplies the power to the Car Kit when the car charger is connected
to your car.
I-2-6 Built-in Microphone
It allows you and your friend at far end to communicate with quality
voice.
I-2-7 Speaker
I-2-8 Battery Door
Loading and unloading rechargeable batteries by opening the
battery Door.
II-4 Establish Bluetooth Link
After pairing, the mobile phone should have “connect” menu. Please select
it to establish the link. A beep tone will indicate that the Car Kit is
connected. Now you are ready to make and answer calls on the hands-free
Car Kit.
Note: For other phones, please follow their operation manuals to establish
the link!
II-5 Clip the Hands-free Car Kit onto Your Sun Visor (Please refer to Fig. 3)
Fig.3
I-2-9 Visor Clip
Clip the hands-free C ar K it under your car's sun visor.
Table of Content
II. How to Use
Profile and Its Function…………………………………………………………………………1
I-1 Profile………………………………………………………………………………………1
I-2 Function……………………………………………………………………………………2
II. How to Use ………………………………………………………………………………………3
II-1 Charge the Batteries……………………………………………………………………3
II-2 Turn on the Hands-free Car Kit………………………………………………………3
II-3 Pair the Hands-free Car Kit with Your Bluetooth Mobile Phone…………………4
II-4 Establish Bluetooth Link………………………………………………………..………5
II-5 Clip the Hands-free Car Kit under Your Sun Visor …………………………………5
II-6 Answer an Incoming Call………………………………………………………………6
II- 7 Transfer Calls between This Hands-free Car Kit and Your Bluetooth Phone…..6
II-8 Make a New Call by Using Voice Dialing ……………………………………………6
II- 9 Answer the call waiting …...…………………………………………………….…7
II-10 Mute the Microphone……...………………………………………………………….…7
II-11 End a Call……………………………………………………………………….…………7
II-12 Reject a Call … …………………………………………………………………..………7
II-13 Redial Last Dialed Number ……………………………………………………………7
II-14 Adjust the Speaker Volume…………………………………………………….………8
II-15 Recharge the Low Batteries…………………………………………………..………8
II-16 Turn off the Hands-free Car Kit…………………………………………………………8
II-17 VoIP with USB Dongle…………………………………………………………………9
II-18 Auto connection to the Bluetooth Mobile Phone…………………………………10
II-19 Auto power off…………………………………………………………………………10
III. Maintenance and Safe Use …..........………………………………………………………10
IV. Electrical Power Specification of Car Charger / AC Power Adaptor for BT 77P....…..10
V.
Package Contents ...........…..………………………………………………………………11
FCC Interference statement ………………………………………………………………………12
II-6 Answer an Incoming Call
When an incoming call is present, the hands-free Car Kit will ring. Press
“On/Off ” and you can answer the call. The blue LED will continue to flash
once a second while the call is in session.
II- 7 Transfer Calls between This Hands-free Car Kit and Your Bluetooth
Phone
When you are in session, calls can be transferred from your Bluetooth
phone to the hands-free Car Kit and vice versa.
I.
Car charger
V-7-1 From Bluetooth phone to the Car Kit
Press “On/Off ” once, the call will be transferred to the Car Kit.
V-7-2 From Car Kit to the Bluetooth Phone
Please follow the operation manual of your phone.
Fig.2
II-1 Charge the Batteries ( please refer to Fig . 2 )
Thank you for buying the BT 77P, Bluetooth Hands-free Car Kit.
Before you use for the first time, please charge the batteries for 6 hours.
After the first time, you can fully charge your low batteries in 4 hours.
Warning : Use only rechargeable batteries .
II-8 Make a New Call by Using Voice Dialing
II-8-1 When using a Bluetooth Mobile Phone:
II-8-1-1 Press “On/Off ” on the hands-free Car Kit shortly when the
Car Kit is standby.
Note: Make sure that the voice dialing function is properly set up in
the mobile phone and it is within the range of the hands-free Car Kit.
II-8-1-2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice
dial by saying the name of the person on the hands-free Car Kit. The
call will be connected in a few seconds.
II-2 Turn on the Hands-free Car Kit
If the Hands-free Car Kit is powered off, press and hold “On/Off ” for 2
seconds. A long tone will indicate that the hands-free Car Kit has turned
on. At the same time, blue LED will flash for a second. And then, blue
LED will keep on flashing every 3 seconds.
II-8-2 When using a mobile phone without Bluetooth built-in and
requiring a Bluetooth dongle:
II-8-2-1 Press “On/Off ” on the hands-free Car Kit shortly when the
Car Kit is standby.
Note: Make sure that the voice dialing function is properly set up in
the Mobile phone and it is within the range of the hands-free Car Kit.
II-3 Pair the Hands-free Car Kit with Your Bluetooth Mobile Phone
II-3-1 Put the hands-free Car Kit in pairing mode
When the hands-free Car Kit is powered off, press and hold
“On/Off ” for 5 seconds. In the first 2 seconds, a long tone will
indicate that the hands-free Car Kit has turned on. At the same
time, blue LED will flash for a second. At the end of 5 seconds, a
double tone will be heard. Then the red and blue LEDs will flash
alternatively, which indicates the hands-free Car Kit has entered
into the pairing mode.
Note: Make Sure the batteries are fully charged .
I . Profile and Its Function
I-1 Profile (Fig.1)
Fig. 1
6. LED
7. Speaker
8. Battery Door
9. Visor Clip
1. Volume Down
2. Volume Up
3. On/Off
4. DC Socket
5. Microphone
II-3-2 Put your Bluetooth Mobile Phone in pairing mode
II-3-2-1 Follow the operation manual of your Bluetooth mobile
phone to start the pairing process. Typically, this has to be done
by going to a setup or connect menu and then selecting the options
to discover Bluetooth devices. Bluetooth may take several
seconds to establish a connection.
II-3-2-2 Your phone's display will indicate that it has found the new
device “BT 77P”. When you want to pair it, the phone's display
would demand a passkey or PIN, then you can enter a sequence of
“0000”.
II-3-3 Pair the hands-free Car Kit with your Bluetooth Mobile Phone
The blue LED of hands - free Car Kit will flash every 3 seconds
indicating successful pairing. The phone may also ask whether
you want to change the Car Kit's name. We recommend you
should approve the name of “BT 77P” and do not change it.
Note: Make sure if pairing does not occur as expected, turn off the
hands-free Car Kit and your phone, then wait for 10 seconds.
Turn on them again and repeat from Step 3-1 to Step3-3 .
II-8-2-2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice
dial and the call will be connected in a few seconds.
II-9
A nswer the call waiting
During the active call in session if another call is coming, press “Volume
Down” for 2 seconds will make the mobile phone switch to the waiting call
and place the active call on hold. Press “Volume Down” for 2 seconds
again, mobile phone will come back to the first active call.
II-10 Mute the Microphone
II-10-1 To mute a call
Press “Volume Up” for 2 seconds and a beep tone will indicate the
microphone is muted. A periodic reminder tone will be heard while
the mute function is active.
II-10-2 To un-mute a call
When the microphone is muted, press “Volume Up” for 2 seconds.
Then the mute is released and the periodic reminder tone will
stop.
II-11 End a Call
While a call is in session on the hands-free Car Kit, press “On/Off ” and
you will disconnect the call. A long tone will indicate that the call has
ended. After the call is disconnected, the blue LED will flash normally.
II-12 Reject a Call
When the hands-free Car Kit is ringing, press “On/Off ” for 2 seconds.
Ringing will stop and a long tone will indicate that the call is rejected.
II-13 Redial Last Dialed Number
To redial the last dialed number, press “Volume Down ” for 2 seconds
when the Car Kit is standby. A beep tone will indicate an attempt to
redial.
II-14 Adjust the Speaker Volume
While a call is in session, pressing and releasing “Volume Up” will
increase the speaker volume, and pressing and releasing “Volume
Down ” will decrease the speaker volume. A double tone will be heard
whenever the volume limit is reached.
II-15 Recharge the Low Batteries (please refer to Fig.2)
The LED of this Car Kit will flash red instead of blue when the battery
are low. There will also be a tone every 2 minutes. Please connect the
charger cable to the Car Kit.
II-15-1 During recharging
The LED shows a steady red light if the Car Kit is off,
and the red light will dim once every 3 second while the Car Kit is on.
II-15-2 Fully charged
A steady blue LED represents the Car Kit is off and fully charged.
And a blue LED dims once every 3 seconds while the Car Kit is on and
fully charged.
Note: When the battery level is too low, the hands-free Car Kit will
automatically power off. It cannot be powered on again unless the
batteries are sufficiently charged.
II-16 Turn off the Hands-free Car Kit
When the hands-free Car Kit is on, press and hold “On/Off ” for 5
seconds. A long tone will indicate that the Car Kit starts to power off.
LED continues to flash for a few seconds. At last LED will turn off and
the Car Kit is powered off.
V . Package Contents
Accessories
Status
1 x Car Charger
Provided
3 x AA
Rechargeable Batteries
Provided
Warning: Use only rechargeable batteries.
Disclaimer:
Talk time and stand-by time of the Bluetooth Car Kit will vary depending on
mobile phone model being used.
Note:
BQB, CE and FCC approve d
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by In-Tech Electronics Ltd. is under license. Other
trademarks and trade names are those of their respective owners.
Bluetooth functions and operations may not be available or may vary depending
on different mobile phones.
11
II-17 VoIP with USB Dongle
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
USB Bluetooth dongle
Plug a USB Bluetooth Dongle into your computer, follow the pairing and
connecting procedure to link up your Car Kit. Once it is properly set up using
the VoIP function, you can use the Car Kit as a speaker phone to enjoy
wireless telephone conversation with your friends. Your Car Kit can be used
in car, or conveniently be used as a speaker conferencing unit in the office
or at home any time.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
12
II-18 Auto connection to the Bluetooth Mobile Phone
The Car Kit has already been paired with a Bluetooth mobile phone. If
it is turned off and turned on again, it will search for available
Bluetooth link. If the previously paired mobile phone’s Bluetooth
feature is on, the Car Kit and the mobile phone will re-establish the
Bluetooth link automatically.
II-19 Auto power off
In order to save power, the Car Kit will turn off automatically after it is
disconnected from the Bluetooth link for an hour.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
III. Maintenance and Safe Use
◎ Use dry cloth to clean hands-free Car Kit!
◎ Recycle the batteries after their life time!
◎ Do not expose the Car Kit to liquid or moisture!
◎ Do not expose the Car Kit to fire or open flames!
IV . Electrical Power Specification of Car Charger / AC Power Adaptor for
BT 77P
The electrical power specification of car charger / AC adaptor for BT 77P
Bluetooth Car Kit is as follows:
11 0.5mm
Output: 5V 1.0A
Output pin configuration:
5V 1.0A
NC
Ground
2.5mm
10
13

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2007:01:16 14:23:58+08:00
Create Date                     : 2006:12:01 17:29:56+08:00
Page Count                      : 2
About                           : uuid:f2259a89-e63a-48bf-bef4-ef91967e2921
Producer                        : Acrobat Distiller 6.0 (Windows)
Mod Date                        : 2007:01:16 14:23:58+08:00
Creation Date                   : 2006:12:01 17:29:56+08:00
Author                          : kefenchen
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2007:01:16 14:23:58+08:00
Document ID                     : uuid:e0ab1a21-1724-4af3-9f6c-c8ad5c03eed3
Format                          : application/pdf
Title                           : 8112 User Manual 77P Abe Logo...
Creator                         : kefenchen
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NV6-CS8112

Navigation menu