Indyme Solutions CB550 Wireless Director Call Box User Manual Indyme Customer Service

Indyme Solutions, Inc Wireless Director Call Box Indyme Customer Service

Contents

manual inser

Indyme Customer Service
How To Contact Us:
The Indyme team of communication systems professionals can assist with every phase of
implementing and maintaining your system. There are several support options available,
including phone support, e-mail support, and on-site equipment repair.
Phone Support
Phone support is available from 6:00 a.m. to 6:00 p.m. (Pacific Time) Monday through
Friday. However, emergency support is available 24 hours a day. Call Indyme Customer
Service at 1-800-829-6141.
E-mail Support
Address e-mail messages to support@indyme.com. When doing so, include the
Messaging Telephony Server (MTS) serial number, location, and a brief description of
the problem.
Mail In Equipment Repair
Equipment Manufactured by Indyme—All Indyme manufactured equipment carries a
one-year warranty. To obtain repair service, call Indyme Customer Service at 1-800-829-
6141, Monday through Friday from 6:00 a.m. to 6:00 p.m. (Pacific Time).
A Return Material Authorization (RMA) number will be issued. Ship the equipment to the
Indyme Repair Depot, freight pre-paid. It will be repaired and returned within three
business days.
This service is provided free of charge for equipment still under warranty or covered by a
Maintenance Agreement.
Non-Indyme Manufactured Equipment—The procedure for this equipment is the same
as stated above, however ten business days must be allowed for repair and return.
On-Site Equipment Repair
For on-site service, call Indyme Customer Service at 1-800-829-6141, Monday through
Friday from 6:00 a.m. to 6:00 p.m. (Pacific Time).
If the source of the problem cannot be identified and corrected over the phone, the
Indyme Field Service Coordinator will dispatch a technician. Actual response time may
vary, but will not exceed 24 hours for emergency calls, 48 hours for urgent calls, and 72
hours for routine trouble calls.
Indyme Electronics, Inc. P/N: 430441-00 Rev E
INDYME ELECTRONICS, INC.
Limited Warranty
Indyme Electronics, Inc. (“Seller”) warrants Indyme-branded products (“Products”) to be free of defects in
materials and workmanship under normal use for a period of one year from the date of shipment to the
original Buyer. This warrant extends to the original Buyer only and does not extend to any subsequent
purchaser of the Products. Seller’s obligation to repair or replace defective Products in accordance with
this Warranty shall be Buyer’s sole and exclusive remedy.
In the event Seller installs the Products, installation workmanship and materials (e.g., jacks, wire, cables,
etc.) are warranted to be defect-free for one year after installation date; defects shall be remedied at no
charge. On-site remedy of defective Products is not included in this installation warranty unless Buyer
purchased an appropriate installation warranty option.
In the event Seller provides equipment not manufactured by Indyme, any original manufacturer warranty
applicable to such equipment shall be extended to Buyer.
Seller reserves the right to make changes or improvements in its Products without incurring any obligation
to similarly alter Products previously purchased.
Excluded from this warranty are items normally consumed or which require replacement due to normal
wear, or loss or damage to Buyer’s property (other than Products sold by Seller).
Seller shall not be responsible or liable for any cost associated with servicing or installation of Products by
persons not authorized by Seller.
SELLER SHALL NOT BE LIABLE FOR NOR SHALL THIS WARRANTY INCLUDE OR APPLY TO LOSS
OR DAMAGE CAUSED BY OR RESULTING FROM THE FOLLOWING:
1) Improper installation of the Products (unless installed by Seller) or the failure to install the
Products in strict compliance with specifications provider to Buyer by Seller;
2) Operation of the Products in a manner other than as specified in Seller’s instruction manuals, or
in an unsuitable operating environment;
3) Modification, alteration or repair not performed by Seller or by third parties authorized by Seller;
4) Destructive conditions including but not limited to earthquake, flood, inclement weather, lightning,
fire, war, sabotage, or malicious mischief;
5) The enforcement of any law or ordinance regulating use of the Products, except for any law or
ordinance in effect as of the date of delivery;
6) Abuse, misuse, negligent handling, improper or inadequate maintenance, tampering, accident, or
exposure to water or other liquids;
7) Operation on improper voltages, power fluctuations, or power line transients;
8) Radio signal interference including operational difficulties caused by radio signals on or near
Products’ operating frequencies.
THIS WRITTEN WARRANTY IS EXCLUSIVE OF AND IN LIEU OF ALL WARRANTIES, EXPRESS OR
IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE.
THERE ARE NO OTHER WARRANTIES, AGREEMENTS, OR UNDERSTANDINGS EXTENDING
BEYOND THOSE SET FORTH IN THIS WARRANTY. NO OTHER WARRANTY, ORAL OR WRITTEN,
IS AUTHORIZED OR HAS BEEN GIVEN BY SELLER TO BUYER. Some states do not allow for the
disclaimer of implied warranties or allow limitations on how long an implied warranty lasts, so the
foregoing limitations may not apply to this sale.
Warranty Claims. Upon Buyer request, Seller will issue a Return Material Authorization (“RMA”)
number. Defective Product, identified with the RMA, shall be returned freight prepaid by Buyer to Seller’s
designated repair facility. Repaired or replacement Product shall be sent to Buyer freight prepaid by
Seller, using same method (e.g., ground, air, express, etc.) employed by Buyer to send defective Product.
Indyme Electronics, Inc. P/N: 430441-00 Rev E
Indyme Electronics, Inc. P/N: 430441-00 Rev E
FCC Notice
MTS WARNING: This equipment has been tested and found to comply with the limits for a Class "A"
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their expense.
RF Call Box Warning: This equipment complies with Part 15 of the FCC Rules. Any changes or
modifications not expressly approved by Indyme Electronics, Inc. could void the user's authority to
operate the equipment. No patent liability is assumed, however, with respect to the use of the information
contained herein.
Copyright
Information in this document is subject to change without notice. Companies, names and data used in
examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or
transmitted in any form or by any means, electronic or mechanical, for any purpose, without the
expressed written permission of Indyme Electronics, Inc..
2001 Indyme Electronics. INC. All rights reserved.
Export Administration Regulation
This document contains technical data that may be controlled under the U.S. Export Administration
Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export.
Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulation is
prohibited.
Disclaimer
This guide has been validated and reviewed for accuracy. The sets of instructions and descriptions were
accurate for the covered products at the time of this guide’s production. However, succeeding product
versions and guides are subject to change without notification. Therefore, Indyme assumes no liability for
damages incurred directly or indirectly from errors, omissions or discrepancies between the products and
the guide.
Software Provided with the MTS
The accompanying software is provided to you free of charge, as is, without warranty of any kind. Indyme
Electronics does not accept responsibility for improper or misuse of these products. Read all licensing
agreements for Netscape 4.5 and Java Sun software before installing these products on your machine.
General Information
The top cover or “lid” of the MTS must have the thumbscrews tightened such that a tool is needed to
open the box. CAUTION: The MTS unit must be connected only to a properly rated supply circuit.
Rack mounted units must maintain a reliable earthing (grounding) at all times. CAUTION: Maximum
ambient operating temperature is 40 degrees Celsius. Never restrict the air flow through the unit's fan or
vents. When installing unit into a rack, distribute the weight evenly. Otherwise, hazardous conditions may
be created by an uneven weight distribution.
The motherboard in this system contains a Lithium battery. CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace with the same or equivalent type battery recommended by the manufacture.
Dispose of used batteries according to manufacture’s instructions.

Navigation menu