Indyme Solutions CU5300 WIRELESS CONTROL UNIT User Manual BRD Lite
Indyme Solutions, Inc WIRELESS CONTROL UNIT BRD Lite
Users Manual
CU5300/5303W Control Unit Technical Description Document TDD V1.0.1(draft) 06/22/2017 2 DRAFT INDYME CONFIDENTIAL FOR INTERNAL USE ONLY 3 CONTENTS Glossary .................................................................................................................................. 5 Introduction ............................................................................................................................ 5 Port Overview ......................................................................................................................... 7 Functional Description ............................................................................................................. 8 1. Overview ............................................................................................................................................. 8 2. Startup Sequence ................................................................................................................................ 8 Supported Functions ............................................................................................................... 8 1. Input Compatibility ....................................................................................................................... 8 2. Capacity 9 3. Ethernet 9 4. Universal Serial Bus (USB) ................................................................................................................... 9 5. Audio Ports .......................................................................................................................................... 9 6. Controls and Indicators ....................................................................................................................... 10 7. Shopper and Director Call Box Support .............................................................................................. 10 8. SmartSense Device Support ................................................................................................................ 10 9. Scheduled Messaging (Promos) .......................................................................................................... 11 10. Email Output ..................................................................................................................................... 11 11. Two-Way Radio Support ................................................................................................................... 11 12. Graphical User Interface (GUI) .......................................................................................................... 11 13. Activity Data ...................................................................................................................................... 11 14. SmartPortal Support ......................................................................................................................... 12 15. Power 12 16. Packaging........................................................................................................................................... 12 17. Virtual Private Network (VPN) Support............................................................................................. 12 18. MAC Address ..................................................................................................................................... 12 19. FCC and IC Statements ...................................................................................................................... 13 References and Related Documents ......................................................................................... 14 4 Revision History Version # Date Author(s) Summary of Changes 1.0 12/22/2016 Mike Sheppard Initial draft. 1.0.1 06/22/17 Joe Silberman Revised Draft including augmented details as requested by TCB Reviewers Name Organizational Role Derek Morikawa VP Engineering Ron Weiland Senior Software Engineer Greg King Senior Hardware Engineer Reviewed Date 5 Approvers Name Project Role Approval Date Derek Morikawa Technical Sponsor GLOSSARY Abbreviation/Acronym Term Description CU5300 Control Unit Smart Control Appliance CU5303W Control Unit Smart Control Appliance for Walgreens INTRODUCTION The CU5300/5303W is the next generation control platform for the Smart Response System. The controller features a configurable event processing engine, message library, and fully integrated 900 MHz RF transceiver to facilitate communication with shopper help buttons and Global Solution Family (GSF) Smart Sense devices. 6 CU5303W Connect RS CRS (Walgreens) CU5300 Connect RT CRT CU5301 Connect RV CRV (Kohls) 7 PORT OVERVIEW The RECEIVER Port is used to connect the Control Unit to 303MHz CB451 Call Box Receivers ONLY. The RECEIVER Port provides +12VDC to support a maximum of (4) CB451 Receivers. CB451 Call Box Receivers are connected using an RJ45 modular plug and CAT-5 cable The A1 and A2 indicators are multi-color LEDs used to indicate the status of the two AUDIO Ports. Each LED will light up RED or GREEN to indicate the status of the corresponding Audio Port. Both LEDs are on during normal operations. A1 is normally GREEN but turns RED when a busy signal is detected on AUDIO Port 1. A2 is normally GREEN when connected to an Indyme Paging Transmitter, but turns RED when a busy signal is detected, or if the Paging Transmitter is disconnected. The USB Ports are NON-STANDARD interfaces. They are not intended for peripherals and are used for software upgrades ONLY. The NET Port is the primary network interface to the 900 MHz CB951 Access Point, a network based receiver. The CB951 receives signals from Indyme Global Smart Sense devices and sends those signals to the Control Unit via the Local Area Net on the NET Port. It is configured as the main Ethernet Port when the Control Unit is connected to a Local Area Network. 8 FUNCTIONAL DESCRIPTION 1. Overview The CU5300 is the latest hardware control unit developed by Indyme to be the central interface for the Global Solution Family (GSF) of Smart Sense Devices, legacy Call Boxes, and Shopper Help Buttons. The CU5300/5302W offers an easy to configure and install solution for rapid deployment of a completely integrated system offering. The CU5300 accepts triggers from GSF help buttons and Smart Sense devices over the network via CB451 or CB951 transceivers. The default configuration provides support for ten (10) call boxes and four (4) CB451 receivers. Once configured, the controller provides the alarm engine and messaging inputs for connected GSF and Director call boxes, and Smart Sense devices. 2. Startup Sequence The CU5300 startup sequence begins from a bootloader located in a partition on a local SD card. This is the code that runs prior to the application software and initiates the Linux kernel in the controller. After the power up sequence completes, a properly configured CU5300 will sit in standby mode until it receives an input from the network or via a web-based GUI using a compatible web browser. All GUI functionality resides within the control unit and is not downloaded by the web browser. SUPPORTED FUNCTIONS 1. Input Compatibility The CU5300/5303W • • Accepts event triggers from a network device (POS terminal) or wireless device (shopper help button) Accepts event triggers from GSF help buttons, Smart Sense devices and QuickLink over the Ethernet port 9 2. Capacity The CU5300/5303W • • • Supports a minimum of 4,000 wireless device capability (i.e., 0001 – 3999) Supports a minimum of 1,000 Ethernet inputs that are separated from the wireless addresses Supports a minimum of 60 minutes of audio storage 3. RF Output The CU5300/5303W • • • Frequency Range: 868.175 - 869.675 MHz and 918.1 – 925.0 MHz Modulation Type: 2-GMSK frequency hopping spread spectrum Antenna Type: Omni-Directional dipole, +2dBi maximum gain, RP-SMA connector 4. Ethernet The CU5300/5303W • • • • Supports a standard 802.3 10/100 Ethernet connection. Supports 802.3af and 802.3at Uses a standard RJ45 connector with indicator LEDs for troubleshooting. Appliance is able to accommodate fixed and DHCP IP addressing. 5. Universal Serial Bus (USB) • • • Two (2) USB connections are available on the controller. The USB ports are secured to minimize risk exposure. The USB ports will be used for various system and variable updates only. 6. Audio Ports Direct Audio 1 • • • • • • • Direct Audio 1 is typically used to connect to a Public Address (P.A.) system. Direct Audio 1 has Audio In, Audio Out, Busy In, and a seize out (same as the Direct Audio 1 port on the CLX/CLT). Direct Audio 1 is a standard RJ45 with the same pinouts as current CU’s Direct Audio 1 has an Input and an Output allowing another audio source to be looped through the appliance. The appliance is able to switch between the external audio source (Audio In) and the internal audio output as needed. The powered down and default mode allows the audio to pass from Audio In to Audio Out. The appliance is able to monitor Audio In for busy status (VOX). This feature is selectable on/off. Direct Audio 2 • Direct Audio 2 is typically used to connect to an Indyme PT transceiver. 10 • • • Direct Audio 2 has an Audio In, Audio Out, Busy In, and a PTT out (same as the Direct Audio 2 port on the CLX/CLT). Direct Audio 2 is a standard RJ45 with the same pinouts as current CU’s. This port is used with existing PT14 and PT14-1 units, and will be 100% reverse compatible. 7. Controls and Indicators • • • • • • • • • • • • • • • • • Direct Audio 1 has a bi-colored status LED Green = Ready Red = Busy (Vox mode only) Amber = In use (audio outputting) Direct Audio 2 has a bi-colored status LED Green = Ready Red = Busy (carrier presence contact or audio input presence, depending on mode, e.g., PT14-4 vs. PT14-1) Amber = In use (PTT seize) Power/Heartbeat/Error has a bi-colored status LED Flashing Green = Good Flashing Red = Error Volume control consists of two (2) push buttons (same/similar to CLX/CLT) Used to select Audio 1 or Audio 2 Used to increase or decrease volume levels Volume level indicated on Direct Audio 1 or Direct Audio 2 LED while adjusting Can use same method used on CLX/CLT, where cadence of flashing LED indicates volume level. • Slow flash = low volume • Rapid flash = high volume There is also a means to adjust the volume for Audio 1 and Audio 2 independently via the GUI. This allows the user to adjust using a numbers scale as opposed to the flash rate on the LED. 8. Shopper and Director Call Box Support • • • All current (as of EFS release date) Shopper & Director call boxes are supported in the CU5300/5303W. The default configuration will support up to ten (10) call boxes. A License key or other method of unlocking features is not currently supported, but will be implemented in a future sw release for additional shopper call box support. 9. SmartSense Device Support • • All current (as of TDD release date) GSF SmartSense devices are supported in the CU5300/5303W. The default configuration supports up to ten (10) devices. 11 10. Scheduled Messaging (Promos) • • • By default, Interval promos are disabled. By Default, Day Time promos are disabled. By default, Time Of Day promos are disabled. 11. Email Output • • By default, definable email output addresses are limited to five (5). In future sw releases, a License key or other method of unlocking features will be required to enable additional functionality. 12. Two-Way Radio Support • • • By default, two-way radio output is supported by the CU5300/5303W using the following: PT14-4, 4 channel transceiver PT14-1, single channel transceiver 13. Graphical User Interface (GUI) • • • • • • • A GUI is available via the Ethernet connection for configuration of the CU5300/5303W variables. The GUI is presented in an easy to follow, intuitive manner so that a non-technical end user, such as store manager, can configure the system. The CU5300/5303W GUI has many of the same components for configuring the variables that are currently available via the CLX/CLT units. Multiple languages are supported by the CU5300/5303W. • English • Spanish • German • French • Portuguese (Brazil) The CU5300/5303W supports the following Browsers: • IE • Chrome • Safari • FireFox Audio messages are implemented in a format that can readily be recorded with a standard Windows or Mac PC. The capability to Upload, Listen, and Delete audio messages is managed via the GUI. 14. Activity Data • • • The unit retains all activity data in a .csv file The unit has the capability of pushing the data to a designated location (URL) including log-in credentials. (ftp, sftp) The GUI provides an easy way to download the .csv file to a local or networked PC. 12 15. SmartPortal Support • • The CU5300/5303W is fully supported by Smart Portal Smart Portal is capable of managing: • Software updates (Full Linux upgrade not available with CU Release 1.0)! • Configuration management • Data collection • Message management 16. Power • • The CU5300/5303W power supply: o Input voltage range 120/240 VAC 50-60 Hz, 0.4 Amps maximum o Ouput voltage +12 VDC at 1.25 Amps The unit supplies enough power to support multiple GSF transceivers, and up to four (4) 303 MHz receivers. 17. Packaging The device enclosure will be a composite material with dark gray color. Size: • • Dimensions: 6.0” W x 4.0” D x 1.0” H Weight: 0.597 lbs Color: • Dark Gray Mounting: • • • • • Bulkhead: Keyholes provide a clean installation to standard bulkhead mount. Ceiling mounting: Optional ceiling mount hardware is available. Shelf mounting - optional feet for countertop or shelf mounting. Bulkhead mounting orientation will be with connectors either positioned down or off to one side. Rack mounting 18. Virtual Private Network (VPN) Support • The CU5300/5303W supports a secure virtual private network (VPN) topology and allows only authenticated remote access using tunneling protocols and encryption techniques to prevent access to, or disclosure of private information. 19. MAC Address • A media access control address (MAC address) is assigned to each unit as a unique identifier for communications at the data link layer of a network segment. 13 20. FCC and IC Statements FCC statements: “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” “Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.” If the device has removable antennas then a list of the antennas that may be used with the device must be included in the user manual. The list should identify the type of antenna, impedance (usually 50 ohms), and the maximum gain in dBi. IC Statements: “This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” “Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.” Health Canada RF Exposure Warning Statement “This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s requirement. Information can be obtained at http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/indexeng.php” French version: “Cet appareil est conforme avec Santé Canada Code de sécurité 6. Le programme d ’installation de cet appareil doit s’ assurer que les rayonnements RF n’est pas émis au-delà de I’exigence de Santé Canada. Les informations 14 peuvent être obtenues: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-fra.php” REFERENCES AND RELATED DOCUMENTS Title Link MPR http://sharepoint1/prodmgmt/MPRs/Forms/AllItems EFS http://sharepoint1/ProjectMgmt/Engineering%20Functional%20Specifications%20EF S/Forms/AllItems.aspx
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 14 Language : en-US Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Microsoft® Word 2016 Title : BRD Lite Template Creator : Michael Sheppard Creator Tool : Microsoft® Word 2016 Create Date : 2017:06:22 13:13:02-07:00 Modify Date : 2017:06:22 13:13:02-07:00 Document ID : uuid:E1E44700-63E8-40D2-B838-D206DFD56DA6 Instance ID : uuid:E1E44700-63E8-40D2-B838-D206DFD56DA6 Author : Michael SheppardEXIF Metadata provided by EXIF.tools