Infinition BR-3502 BR-3502 User Manual UserManual

Download:
Mirror Download [FCC.gov]
Document ID	297712
Application ID	68Uv7MVls5PZcJCEaYyYVA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.28kB (578488 bits)
Date Submitted	2003-01-22 00:00:00
Date Available	2003-03-17 00:00:00
Creation Date	2002-11-21 10:24:21
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2002-11-29 12:14:34
Document Title	UserManual
Document Creator	Adobe PageMaker 6.52
Document Author:	ben

BR-3502
User Manual
Safety Warning
Based on limits specified by the Federal Communication Commission (FCC) on Radio Frequency (RF) emissions in a general population environment, continued exposure to radiation
should be avoided within 0.5 meter in front of the radar. Radiation levels outside this region
fall within regulations of 1 mW/cm2 and are not considered safety hazards. When setting up
the antenna, special care should be taken to avoid situations where the antenna radiates
towards individuals. The antenna should be positioned such that bystanders are located behind the antenna. During antenna setup, the antenna power cord should be unplugged to
avoid accidental hazardous exposures to radiations. Always turn the antenna transmitter off
during periods of inactivity. Direct visual contact with the radar when transmitting should be
avoided at all times.
Specifications
Nominal Frequency
Nominal Transmitting Power
Antenna Gain
Transmitter Stability
Beam Width
Dimension
Radar Head
Power Supply / Amplifier
Total weight
35.5 GHz
100 mW
20 dBi
±1.0%
12° x 12°
5.8 x 5.8 x 4.3 cm
20.3 x 14.6 x 6 cm
2.7 kg
Introduction
The BR-3502 radar can be used to measure the radial velocity of any moving object located in the radar
beam coverage. The output of the radar is an analog signal with a frequency and amplitude proportional to
the radial velocity and distance of the moving object.
Installation
The BR-3502 radar system includes the following two components:
• Radar antenna head
• Power supply / amplifier unit
The radar head has two (2) 1/4” mounting holes that can be used to install the head at specific locations in
your test setup. The radar head is attached to the power supply/amplifier via a two (2) meter shielded
cable which provides flexibility in positionning it for optimum results.
Operation
The BR-3502 is powered on 120/240 VAC, 50-60 Hz using a conventionnal power cord for connection
in standard power outlet. It is interfaced to a processing unit using a single four-wire cable equipped with
military connectors. This cable is used to carry the radar doppler signal to the processing unit and the
antenna transmission control. You should connect your radar cable from this connector to the appropriate
radar input on your processing unit.
The connector type is ITT Cannon MS3124E16-8P. The following table discribes the pinout of this connector:
Pin
Function
Not Connected
Not Connected
Not Connected
Remote Make for Antenna Transmitter Control (+ 5 Vdc Output)
Make Ground
Doppler Signal + (5 Vpp max.)
Doppler Signal - (5 Vpp max.)
The remote activation of the transmitter is done by the processor by short circuiting pins D and E of the
connector. When the antenna interface cable is not connected, the radar unit does not transmit.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
LIMITED WARRANTY. Infinition Inc. products are warranted against defects in materials and
workmanship for a limited period of time from the date Infinition Inc. ships the products to the customer
as follows: interface hardware (one (1) year); cables, cable reels, radar antennas and acoustic sensors
(ninety (90) days); and software medium (ninety (90) days). All software products sold by Infinition Inc.
are licensed to the customer under the terms of the product software license agreement. Replacement
products will be warranted for the longer of, the remainder of the original warranty period or thirty (30)
days. Expenses for shipment of repaired or replacement products to and from Infinition Inc. shall be the
responsibility of the customer. After examining and testing a returned product, if Infinition Inc. concludes
that the product is not defective, the customer will be notified and the product will be returned to the
customer with an additional charge for shipping, examination and testing. This limited warranty is void if
failure of the products has resulted from accident, abuse, misuse, improper hardware connection or
unauthorized maintenance or repair.
CUSTOMER REMEDIES. The sole obligation of Infinition Inc. (and the customer’s sole remedy)
with respect to this warranty shall be to, at its option, return fees paid or repair/replace any defective
products, provided that Infinition Inc. received a written notice of such defects during the application of
this warranty period.
RETURN/CANCELLATION POLICY. The customer may return unwanted products within twenty
(20) days of the delivery date. A twenty percent (20%) restocking fee shall be charged to the customer
on any returned product. Infinition Inc. reserves the right to cancel any order if the customer representations to Infinition Inc. are false or misleading.
THE PRODUCTS ARE PROVIDED “AS-IS” WITHOUT WARRANTY OF ANY KIND,
AND NO OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED ARE MADE
WITH RESPECT TO THE PRODUCTS, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. INFINITION INC. DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF
THE PRODUCTS IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, OR
OTHERWISE AND DOES NOT WARRANT THAT THE OPERATION OF THE PRODUCTS WILL BE ININTERRUPTED OR ERROR FREE.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. To the maximum extent permitted by
applicable laws, in no event shall Infinition Inc. be liable for any damages, including, but not limited to,
any special, direct, indirect, incidental, exemplary, or consequential damages, expenses, lost profits, lost
savings, business interruption, lost business information, or any other damages arising out of the use or
inability to use the products, even if Infinition Inc. has been advised of the possibility of such damages.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:11:21 10:24:21
Producer                        : Acrobat Distiller 4.0 for Windows
Title                           : UserManual
Subject                         : UserManual
Author                          : ben
Creator                         : Adobe PageMaker 6.52
Modify Date                     : 2002:11:29 12:14:34-05:00
Page Count                      : 4
Has XFA                         : No

EXIF Metadata provided by EXIF.tools