Ingenico IUC15XCL Payment Terminal User Manual Safety instructions
INGENICO Payment Terminal Safety instructions
Ingenico >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1620802 |
| Application ID | ickQbohLBP00A9YbB2/Lmg== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.01kB (150114 bits) |
| Date Submitted | 2012-01-13 00:00:00 |
| Date Available | 2012-01-13 00:00:00 |
| Creation Date | 2011-10-03 10:47:38 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2011-10-03 10:48:32 |
| Document Title | Safety instructions: |
| Document Creator | Acrobat PDFMaker 8.0 pour Word |
| Document Author: | mbuisson |
IUC150 INSTALLATION GUIDE Safety instructions: Lithium battery: IUC150 device is equipped with a lithium battery non‐accessible to the user. Only a qualified operator is authorized to open the unit and replace this component. VORSICHT: IUC150 ist mit einer Lithium‐Batterie, die nicht zugänglich ist für den Benutzer ausgestattet. Der Wiedereinbau der Batterien muß von qualifiziertem Personal bewirkt werden. Beachten Sie die Polarität für die Batterie Lithium. Eine fehlerhafte Installation der Batterie kann eine Explosion führen. Entsorgen Sie die Batterien entsprechend den Anweisungen des Herstellers. CAUTION: For Switzerland, Annex 4.10 of SR 814.013 applies for batteries Power supply network: To cut off the IUC150 power, disconnect the power adapter from the power supply network. You should provide a socket for the incoming power supply satisfying the following conditions: Socket near the device and easy to access; Socket in line with the standards and regulations in force in the country of use; The protection in the installation must be 20A for pluggable equipment type A. FCC standard compliance marking certifies that the product stipulated below: IUC150‐00TXXXXX conforms to the following harmonized standards : – part 15 subpart B of the FCC rules This class (B) digital apparatus complies with Canadian ICES‐003. FCC: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help CAUTION: The user is cautioned that any changes or modifications not approved by INGENICO could void user’s authority to operate the equipment 296134800 INGENICO – 192 avenue Charles de Gaulle – 92200 Neuilly sur Seine – France Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 900007397 R11 000 01 /0140 Copyright © 2011 Ingenico IUC150 INSTALLATION GUIDE RSS‐Gen Clause 7.1.2 statement "Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication." "Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante." RSS‐Gen Clause 7.1.3 statement "This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." "Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." 296134800 INGENICO – 192 avenue Charles de Gaulle – 92200 Neuilly sur Seine – France Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 900007397 R11 000 01 /0140 Copyright © 2011 Ingenico IUC150 INSTALLATION GUIDE Reading contactless cards Characteristics: Physical characteristics: • • Weight (without cable) Dimensions 540 g 132 x 120 x 52.6 mm (lxWxH) Operating conditions: • • • • • External temperature range: ‐35 °C to 70 °C. Internal temperature: ‐20 °C to 70 °C. Relative humidity: 5% ‐ 95%. No condensation. IK10 (on external part) IPx5 (on external part) 296134800 INGENICO – 192 avenue Charles de Gaulle – 92200 Neuilly sur Seine – France Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 900007397 R11 000 01 /0140 Copyright © 2011 Ingenico IUC150 INSTALLATION GUIDE Storage conditions: • • Temperature Relative humidity: Maximum consumption: ‐20°C to +70°C 5% ‐ 95%. No condensation. 400mA at +5V Cleaning instructions: The front screen is an overmolding technology of a strong film. That can be easily cleaned A soft non‐abrasive detergent can be used if necessary. Avoid the use of solvents and abrasive methods or materials. Avoid also the use of pressurized liquids. Operating life: MTBF: 5 years. End‐of‐life : The product belongs to the family of electrical and electronic equipment. Therefore, it is subject to the WEEE directive that requires the collection and the recycling at the end of life product. To assure that the product is collected and recycled with respect to the environment, you must contact your supplier (contact the Ingenico local office or the commercial head office in charge of your country on www.ingenico.com, « contact us » page). The abandonment or uncontrolled disposal of waste can cause harm to environment and to human health. So, by recycling your product in a responsible manner, you contribute to the preservation of natural resources and to the protection of human health. 296134800 INGENICO – 192 avenue Charles de Gaulle – 92200 Neuilly sur Seine – France Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 900007397 R11 000 01 /0140 Copyright © 2011 Ingenico *296108772* The Ingenico products present the symbol for the marking of electrical and electronic equipment as required by the WEEE directive. The crossed‐out wheeled bin printed on the product gives the information about the requirement not to dispose of WEEE as unsorted municipal waste and to collect such WEEE separately.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.0.0 (Windows) Source Modified : D:20111003084642 Create Date : 2011:10:03 10:47:38+02:00 Creator Tool : Acrobat PDFMaker 8.0 pour Word Modify Date : 2011:10:03 10:48:32+02:00 Metadata Date : 2011:10:03 10:48:32+02:00 Document ID : uuid:0298f509-18a1-4d0d-b176-9116dfc40b08 Instance ID : uuid:32530ee4-33b8-4fd8-8021-4628929598e3 Subject : 4 Format : application/pdf Creator : mbuisson Title : Safety instructions: Page Count : 4 Page Layout : OneColumn Author : mbuissonEXIF Metadata provided by EXIF.tools