Ingenico M7002WIBT Signature capture payment terminal User Manual User Guide
INGENICO Signature capture payment terminal User Guide
Ingenico >
installation instructions
MODU/7002 Xtra module Technical Guide Contents 1_ Introduction ............................................................................................ 3 2_ Xtra module general information ........................................................... 4 2_1 Physical dimensions ....................................................................................... 4 2_2 Xtra module Features ..................................................................................... 5 3_ Xtra module Technical information ....................................................... 6 3_1_1 Hardware architecture: ................................................................................................... 7 3_1_2 Wireless Connectivity ..................................................................................................... 8 3_1_3 Internal Frequencies ..................................................................................................... 10 4_ Norms&Marking .................................................................................... 11 4_1 1 Federal Communications Commission (FCC) Statement & Industry Canada (IC) Statement ............................................................................................................ 11 1_Introduction This technical guide is a document that describes the features of the terminal. 2_Xtra module general information 2_1 Physical dimensions 55 mm 21 mm 45 mm Mechanical characteristics External dimensions 55 (L) x 45 (W) x 21 (H) mm Weight 15g (full options) Casing material ABS-PC + TPU 15 g 2_2 Xtra module Features • Wireless connectivity o Wifi o Bluetooth 3_Xtra module Technical information Name Environment Xtra module Operating temperature 0°C to +40°C (32°F to 104°F) Storage temperature -20°C to +55°C (-4°F to 131°F) Operating humidity 85% non-condensing at +40°C (104°F) 3_1_1 Hardware architecture: 3_1_2 Wireless Connectivity / Wi-Fi WiFi connection is optional in Lane/7000 or Lane/8000. This feature is useful to wirelessly connect your terminal to the IP network avoiding the cabling task: Feature Chipset Standard compliance Frequency band Dualband :2.4 GHz and 5 GHz Wi-Fi Marvell 88W8782 802.11 a/b/g/n, SISO, 2.4Ghz and 5Ghz, HT20&HT40 20Mhz Channel : 2412-2472 Ghz / 5180-5320 Ghz / 5500-5700 Ghz / 5700 Ghz / 5745-5805 Ghz 40Mhz Channel : 2442-2452 Ghz / 5190-5310 Ghz / 5510-5670 Ghz / 5755-5795 Ghz www.ingenico.com 28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico – S.A. au capital de 53 086 309 € / 317 218 758 RCS PARIS Radio transfer rate From 1 Mbit/s to 135 Mbit/s Distance Indoor: 70m typical, mini 100m in free sight Max output power Home security 2.4Ghz : 23dBm 5Ghz : 13 dBm WPA, WPA2 Enterprise security EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAPv0, EAP-SIM / Bluetooth Feature Chipset Standard compliance Profile Radio transfer rate Number of supported links on SPP Range Maximum output power 9/12 MODU/7002 Copyright © 2014 Ingenico / All rights reserved Bluetooth V2.0 BC08, CSR8811: http://www.csr.com/sites/default/files/csr8811.pdf Bluetooth 4.0 (Frequency : 2.4Ghz) Bluetooth 4.2 planned on roadmap (Frequency: 2.4Gz) SPP A2DP Other profile to be analyzed on request 1 Mbit/s 3Mbit/s (EDR) 1 open link to PCL 4 reserved for peripherals (barcode, printer, …) Bluetooth Class 2 – max 10m in free sight GFSK : 1.5 dBm Pi/4 DQPSK : 1.8 dBm 8 DPSK : 2.1 dBm 3_1_3 Internal Frequencies • Bluetooth : o Quartz = 26Mhz • Wifi : Quartz = 40Mhz 10/12 MODU/7002 Copyright © 2014 Ingenico / All rights reserved 4_Norms&Marking 4_1 1 Federal Communications Commission (FCC) Statement & Industry Canada (IC) Statement Modular transmitter 15.212 Changes or modifications made to the equipment not expressly approved by INGENICO may void the FCC / IC authorization to operate this equipment. The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below: • OEM Integrator must ensure that the end user manual may not contain any information about the way to install or remove the module from the final product. • Depending on the final host device additional authorization requirements for the nontransmitter functions of the transmitter module may be required (i.e., Verification, or Declaration of Conformity) The OEM integrator is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. • The information on the label and in the user manual is required to be incorporated in the user manual of the final host. see 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES) • Additional label with the words ‘Contains FCC ID: XKB-M7002WIBT’ and ‘Contains IC: 2586DM7002WIBT’ shall be applied and visible from the outside of the host product. • The module must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the module. • The end user manual for the final host product operating with this transmitter must include operating instructions to satisfy RF exposure compliance requirements. Radiofrequency radiation exposure Information : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. • The antenna of the module may not be removed, replaced nor modified. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. No additional antenna must be used. 11/12 MODU/7002 Copyright © 2014 Ingenico / All rights reserved • When the final host product operating with this transmitter deviate from above, installation of this module into specific final hosts may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Feel free to contact us if additional guidance is required. 12/12 MODU/7002 Copyright © 2014 Ingenico / All rights reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Ingenico Company : Ingenico Content Type Id : 0x010100E6156FFDB17E724F8C5A74DF8E5A03E7 Create Date : 2017:07:12 13:33:33+02:00 Modify Date : 2017:07:12 13:33:36+02:00 Source Modified : D:20170712113239 Dlc Doc Id Item Guid : 0bbe7cbd-4f49-47f8-862e-b09b6d3a912d Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:07:12 13:33:36+02:00 Creator Tool : Acrobat PDFMaker 17 pour Word Document ID : uuid:908516db-43fb-4449-80b1-c5d026a35005 Instance ID : uuid:86d11daa-c571-4c9b-8619-c04a75e1f1a7 Subject : 12 Format : application/pdf Title : User Guide Creator : Ingenico Producer : Adobe PDF Library 15.0 Tag dlc Doc Id Item Guid : 0bbe7cbd-4f49-47f8-862e-b09b6d3a912d Page Layout : OneColumn Page Count : 12EXIF Metadata provided by EXIF.tools