Ingenico RP450BT RP457 Mobile Payment Terminal User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3353262
Application ID	+K52hCPYZyEjMkizruUoZw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.32kB (241544 bits)
Date Submitted	2017-04-11 00:00:00
Date Available	2017-04-11 00:00:00
Creation Date	2017-12-29 22:00:27
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-29 22:00:27
Document Title	Microsoft Word - RP457 instruction manual ENG - FCC V0 9 _2_.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	XM152

RP457 Mobile Payment Terminal
This devicesupports magnetic stripe, chip as well as contactless
transactions. The reader only work with select ROAM supported mobile
devices. An additional layer of encryption is added to the reader to
guarantee the card data is protected as it travels from the reader to the
mobile device. Therefore, the readers cannot be used for any other
merchant service and must be purchased from ROAM.
ROAM Data is not liable for any harm caused by the reader to your
mobile device.
You agree that neither ROAM nor our vendors, suppliers or licensors are
responsible for any damages resulting from: (a) anything done or not done
by someone else; (b) providing or failing to provide Services, including, but
not limited to, deficiencies or problems with a Device or network coverage
(for example, dropped, blocked, interrupted calls/messages, etc.); (c)
traffic or other accidents, or any health‐related claims relating to our
Device or Services; (d) Data Content or information accessed while using
our Device or Services; (e) an interruption or failure in accessing or
attempting to access emergency services from a Device, including through
911, Enhanced 911 or otherwise; (f) interrupted, failed, or inaccurate
location information services, (g) information or communication that is
blocked by a spam filter, or (h) things beyond our control, including acts of
God (for example, weather‐related phenomena, fire, earthquake,
hurricane, etc.), riot, strike, war, terrorism or government orders or acts.
© 2007‐2017 ROAM Data, Inc., All Rights Reserved
Usage
(a) Battery Status
A Red LED is present next to the USB connector for battery status.
‐Battery charge: DC 5.0V from USB port to charge the battery
‐Battery full: Red LED is on all the time
‐Battery low: Red LED On and Off for 1s every 3s alternatively
‐Battery very low: Red LED On and Off for 1s every 6s alternatively
‐Battery out of capacity: Red LED Off (and Green LED Off)
‐Battery charging: Red LED On and Off every 1sec alternatively
(b) Reader during Swipe/Tap/Dip
There are 4 LEDs on the top of the reader to indicate progress of a
contactless transaction. In addition, there is a buzzer inside the reader to
prompt Swipe/Tap/Dip.
‐Reader ready: The Red LED on the side of the reader will be On.
‐Reader waiting for card: The reader will generate a beep prompting user
to Swipe/Tap/Dip. One LED lighton top of the reader will turn on (Only for
Contactless).
‐Reader reading the card: 2 LED lightsturn On.
‐Card read successful: 3 LED lightsturn On.
‐Card Processing Error/Multiple Contactless Cards detected: All lights are
turned off to indicate thatthe contactless interface is not acceptablefor this
transaction.
‐Card Processing Error: Only fourth LED light turns On indicating
conditionsfor use of the contactless interface havenot been satisfied (ex:
As an added security measure, transaction amounts over apre‐set
threshold may require a card swipe or insert.).
P
Pairing& Connectingg
a) Turn on the Mob
bile application and the reader.
b) Open the pairingg feature in the app
plication.
c) Select the right reader by matchin
ng the reader serial number and the
serial number sh
hown in the mobile application.
d) Click on OK to co
onfirm phone and reader
to pair and connect
with each
other via Bluetoo
oth.
ee) The Blue LED on
o the reader willl turn solid indicating successfully
connection.
TTroubleshooting
 Make sure the ap
pplication is running on the phone.
t reader is charge
ed before using.
 Make sure that the
orrect mobile appliccation is running.
 Make sure the co
 Make sure the magstripe/contactless card/device iss facing the right
direction when using.
orrect version of the mobile applicatio
on is running.
 Make sure the co
um.
 Make sure rechaarge the battery oncce a month minimu
Need help?
http://www.roamdaata.com
Customer Care: 1.88
88.589.5885 + Optio
on 2
support@roamdata.com
FCC Warning
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:269980e2-9d02-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:09 20:31:35Z
Create Date                     : 2017:07:09 20:31:35Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:269980e2-9d02-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools