Inkbird Tech IBT-2X Bluetooth Cooking Thermometer User Manual BBQ GO

Shenzhen Inkbird Tech. Co. Limited Bluetooth Cooking Thermometer BBQ GO

user manual

IBT-2XBBQ GOInkbird Tech. C.L.Shenzhen, GD, 518000, Chinawww.ink-bird.comcs@ink-bird.comBluetooth Cooking Thermometer
Get to know the devicePower ON/OFF Pairing ButtonStop Alarm ButtonTemperature Unit ( °C / °F )1Probe IndicatorBluetooth IndicatorProbe SocketsBattery Cover1 2AAA Battery x 2Probe with cableThis device provides 2 sockets for probes, which enable you to monitor 2 items at same time. If you need another probe besides the one in the standard package, please contact the dealer.2Current Temperature Value(Not Included)
Put in the batteryTwo AAA size batteries are needed for this device. Make sure they are put in the right direction by following the icons on the unit.Open the battery cover.Put in batteries, noticing the icons that show directions.Lock the battery cover.Download the APPSearch the keyword ‘bbq go’ in Appstore or Google Play, or scan the following QR code with your phone.Download and install it for free.BBQ GO APPMake sure your phone meet the requirements:iPhone 4S, and later models;iPod touch 5th, ipad 3rd generations and later models, all ipad mini;Android devices running version 4.4 or later, with blue-tooth 4.0 module.
Install the probesThe device will keep scanning the sockets when its power is switched on, the Probe Indicators will blink one by one from 1 to 2 where probes are plugged in.Then insert the probes into the food, make sure the front tip of the probe is in the center of the food to get accurate temperature.Pair with your phoneKeep the bluetooth switch of your phone on.Launch the app, and follow the instructions in the app to pair and activate the device.Press and hold the power button on the device for 3 seconds to power it on.4Connected successfully.Once paired the device with your phone, you don’t need to do it again, unless you change to other phones.Bluetooth IndicatorNo IconIcon BlinkingIcon Fixed12Probe 1Probe 2
Enjoy your barbecue timePower ON/OFFOptions Temperature HistoryPreference Display Probe Number Current TemperatureTarget Temperature Connection StatusTimer Preference SetupChoose the food type and preference for the food where each probe is inserted, the app and the device will display its current and target temperature.The user interface of the app may be changed when upgraded.Please follow the instructions in the app.Power ON: Press and hold the power button for 3 seconds.Power OFF: Press and hold the power button for 3 seconds. Auto-off after 8 hours out of connection with phone.When the food is ready, the app and the device will alarm.Device Setting
WarningThe heat resistance varies in different components of the probe, DO NOT put the probes directly in the fire frame. And probes are NOT dishwasher safe. Please DO NOT put the teflon cable and the connecting part (between the sensor and teflon cable) into the water.SensorTeflon cableWith stainless steel mesh(Length: about 115cm / 3.8ft)300°C / 572°F For instantaneous test250°C / 482°FFor long-time monitoring250°C / 482°FFor long-time monitoringAnnex I Accuracy Table of IBT-2XTemperature RangeAccuracyCentigrade Fahrenheit0~6°C / 32~43°F7~15°C / 44~59°F16~30°C / 60~86°F31~170°C / 87~338°F171~190°C / 339~374°F191~220°C / 375~428°F221~250°C / 429~482°F 4°C 6°F3°C 4°F 2°C 3°F1°C 2°F2°C 3°F 3°C 4°F4°C 6°FNon water-proofThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu