Inmarsat ISATPHONE Satellite phone with Bluetooth and GPS for use on the Inmarsat satellite network User Manual
Inmarsat Limited Satellite phone with Bluetooth and GPS for use on the Inmarsat satellite network
Inmarsat >
User Manual
click to navigate
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalising settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
1
The mobile satellite company™
user guide
click to navigate
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
2
Congratulations on buying your IsatPhone Pro.
It offers the ultimate combination:
Global coverage
Robust handset
Clear voice quality
Reliable network connection
Long battery life
Easy to use
From Inmarsat, the world’s leading provider
of mobile satellite communications.
Please follow this user guide for further information on how to set up,
connect, personalise and use your phone safely. Further information
is available at inmarsat.com/isatphone.
click to navigate
3
Exposure to radio frequency energy
IsatPhone Pro is a radio transmitter and receiver.
When the phone or Bluetooth handsfree is turned
on, it emits low levels of radio frequency energy.
The phone is designed and manufactured not
to exceed the safety limits for exposure to radio
frequencies (RF) as recommended by the ICNIRP
(International Commission on Non-Ionising Radiation
Protection) and as adopted within mandatory
standards of the European Commission and the
United States of America.
Specific Absorption Rate (SAR) is used to measure
radio frequency energy absorbed by the body when
using a mobile phone. IsatPhone Pro is compliant with
the EC standards for exposure specified in EN 50360
and EN 50361. For use of the phone at the ear, these
standards set a SAR limit of 2.0 W/kg averaged over a
10g volume.
IsatPhone Pro is also compliant with the Federal
Communications Commission (FCC) standards and
test procedures as reflected in the requirements of 47
CFR §2.1093 and FCC OET 65 Supplement C. For use
of the phone at the ear, these standards set a SAR limit
of 1.6 W/kg averaged over a 1g volume.
Tests for SAR are conducted in accordance with
international guidelines for testing using standard
operating positions as per the procedures for the
applicable standards, with the device transmitting at
the highest certified power levels in all operational
frequency bands.
safety
Note: The SAR requirements for IsatPhone Pro
are met for handheld at the ear. No measures have
been taken for SAR compliance in a body-worn
position, since in such a position the device cannot
properly communicate with the satellite. Use of the
IsatPhone Pro in a body-worn position is therefore
not recommended from both a performance and a
safety perspective.
Pacemakers
Wireless phones may adversely affect the operation
of some implanted cardiac pacemakers and other
medically implanted equipment. Pacemaker patients
should be aware that the use of an IsatPhone Pro in
close proximity to a pacemaker might cause the device
to malfunction. If a minimum distance of 15cm is kept
between an IsatPhone Pro and a pacemaker, the risk
of interference is limited. If you have any reason to
suspect interference is occurring, immediately switch
off your IsatPhone Pro. Contact your cardiologist for
more information.
Hearing aids
Although most modern hearing aids are immune to
radio frequency interference from satellite terminals,
some wireless devices may interfere with some hearing
aids. In the event of such interference from the use
of the IsatPhone Pro, maintain additional separation
between you and your IsatPhone Pro and/or consult
with your doctor or audiologist.
31
safety
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
2
Other medical devices
Although most modern electronic medical equipment
in hospitals and other clinical environments is shielded
from RF energy, there is still a risk that a wireless
device could cause interference. As such, never use
your IsatPhone Pro near electronic medical equipment
without first requesting permission.
Blasting areas and potentially explosive
environments
As with any wireless phone, do not use your IsatPhone
Pro where blasting work is in progress. Observe all
restrictions and follow any regulations or rules. Do
not use your IsatPhone Pro in areas with a potentially
explosive atmosphere. Note that such areas are often,
but not always, clearly marked.
Battery safety
Use only Inmarsat-supplied or approved batteries,
and recharge your battery with Inmarsat-supplied or
approved chargers for the phone. Use of batteries
that are not Inmarsat-supplied or approved may pose
increased safety risks.
Do not dispose of batteries in a fire, as they may
explode. See Care and maintenance on page 50,
and for guidance on the disposal of batteries and
electronic equipment, see page 54.
Batteries may burn or explode if damaged. Do not
dismantle, open, bend or cut cells or batteries.
Do not attempt to modify or remanufacture the
battery. Do not immerse or expose the battery
to water or other liquids.
In the event of a battery leak, avoid contact of
contents with skin or eyes. If this does happen,
flush the affected areas with water and seek medical
help as appropriate.
Children
Keep out of the reach of children. Do not allow
children to play with your phone or accessories. They
could hurt themselves or others. Products may contain
small parts that could become detached and create a
choking hazard.
321
safety
click to navigate
4
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
Driving
Only use Isatphone Pro in a vehicle using an Inmarsat-
approved vehicular docking unit. Check with the
vehicle manufacturer to be sure that your phone or
Bluetooth will not affect the electronic systems in
the vehicle.
Full attention should be given to driving at all times
and local laws and regulations restricting the use of
electronic and wireless devices while driving must
be observed.
Loudness warning
Avoid volume levels that may be harmful to your hearing.
Pinch hazard
Take care when opening and closing the antenna of
your phone, as it may be possible to trap a fingertip.
321
safety
click to navigate
5
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
6
quick reference
your IsatPhone
Volume up key
Volume down key
Handsfree rest
Handsfree rest
Ear piece
Navigation keys
Centre selection key
Left selection key
Local time
Product name
Status bar
Red key
Right selection key
Information shortcut
Right selection label
Network
Left selection label
Green key
Keypad
Microphone
2.5mm audio connector
Micro USB port
Strap attachment point
USB/audio protective cover
Screen
Signal strength
icons
Keypad locked
Alarm set
Call divert on
Unread message
Microphone muted
Loud profile active
Vibrate profile active
Phone memory full
Bluetooth is paired
Bluetooth headset
connected to your
phone
Wired handsfree
headset connected
GPS fix required
USB connection
Conference call activated
Closed user group number
New voicemail
Missed call
Loudspeaker activated
Silent profile active
Message memory full
SIM card memory full
Bluetooth on
Battery
02 welcome
03 safety
06 quick reference
06 yourIsatPhone
06 icons
07 menu
08 coverage map
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
7
menu
User guide instructions commence from the main screen.
The red key will take you to the main screen.
Call settings
Security
Language
Display
Bluetooth
About
Reset settings
settings
New message
Inbox
Outbox
Drafts
Sent
Saved
Templates
SIM messages
messaging
General
Silent
Loud
Vibrate only
proles
GPS location
gps position
Phonebook
SIM contacts
FND list
My phone number
Service provider
Emergency numbers
Voicemail number
Groups
contacts
Organiser
Date and time
World clock
Calculator
extras
Satellite search
Advanced options
Network operator
network connectivity
Missed calls
Received calls
Dialled calls
Call duration
call log
Once alarm
Recurrent alarm
alarm
02 welcome
03 safety
06 quick reference
06 your IsatPhone
06 icons
07 menu
08 coverage map
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
8
coverage map
IsatPhone Pro may be operated globally.
This map depicts Inmarsat’s expectations of coverage, but does not represent a guarantee of service.
The availability of service at the edge of coverage areas fluctuates depending on various conditions.
I-4 Asia-PacificI-4 Americas I-4 EMEA
02 welcome
03 safety
06 quick reference
06 your IsatPhone
06 icons
07 menu
08 coveragemap
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
9
getting started
package contents
Your IsatPhone Pro box contains:
• Phone
• Battery
• CD
• Quick start guide
• Warranty
• Mains charger and four universal plug adaptors
• Car charger
• Micro USB cable
• Wired handsfree headset
• Wrist strap
The CD can be accessed by a PC running Windows
Vista or XP (tested on Windows Vista SP1 and
Windows XP Pro SP3) and contains the following
documents:
• Quick start guide
• User guide
• Warranty
The CD also contains the following applications and
related “How to” guides:
• USB drivers: for charging your phone via a PC,
setting up a software modem and for running
contact synchronisation and firmware upgrade tools
• Contact synchronisation tool: for synchronising
your phone with Microsoft Outlook and Microsoft
Outlook Express contacts
• Firmware upgrade tool: for undertaking future
upgrades
The above documents and applications are available
in English, Spanish, French, Japanese, Portuguese,
Russian, Chinese and Arabic. They can also be
downloaded from inmarsat.com/isatphone
setting up your IsatPhone
Subscriptions and SIM cards
To use your phone, you will need a SIM card and
a subscription. The services available to you may
depend on your choice of subscription. Contact your
service provider for details.
Inserting the SIM card
Your service provider may have inserted your SIM for
you. If not, your phone will prompt you to Insert SIM
and offer only a limited service until you do so.
321
setting up your IsatPhone
02 welcome
03 safety
06 quick reference
09 getting started
09 packagecontents
09 settingupyourIsatPhone(3)
11 attaching the wrist strap
12 switching your phone on and off
12 setting the phone language and time zone
12 using info
12 accessing important information about
your phone
12 upgrading your phone
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
10
1 Remove the battery cover by using a coin to turn
the screw slot until it is vertical
2 If the battery is in place, lift it out
3 Slide the catch down on the SIM holder and flip it
outwards
4 Make sure the angled corner of your SIM card is on
your left and slide it into the holder
5 Flip the holder back into place and slide the catch
back up
6 Insert the battery, replace the cover and turn the
screw slot until it is horizontal
Inserting and removing the battery
Your phone is supplied with a rechargeable battery,
which may not be fully charged when you take it out
of the box.
Always switch the device off and disconnect the
charger before removing the battery. See Care and
maintenance on page 50 for more information.
1 Remove the battery
cover using a coin to
release the screw or
use the ridged edge
of the battery, which
is designed for this
purpose
2 Insert the battery by
pressing the battery
forward and down.
It will click into place
3 Remove the battery by
pressing the battery
forward, then lift up
and out of the phone.
Replace the cover and
lock the screw
321
setting up your IsatPhone
02 welcome
03 safety
06 quick reference
09 getting started
09 packagecontents
09 settingupyourIsatPhone(3)
11 attaching the wrist strap
12 switching your phone on and off
12 setting the phone language and time zone
12 using info
12 accessing important information about
your phone
12 upgrading your phone
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
11
Charging the phone battery
Your phone is powered by a rechargeable lithium-
ion battery. To maximise its life and its charging
capacity, the first time you charge the battery, charge
it overnight. Use only Inmarsat-supplied or approved
batteries, and recharge your battery with Inmarsat-
supplied or approved chargers for the phone.
Do not leave the battery charging for extended
periods of time.
The battery can be charged by:
• Using the AC charger (connecting to a wall socket)
• Using the micro USB cable (connecting to a PC)
• Using the car charger (connecting to a vehicle
cigarette lighter/power outlet)
You also have the option of using a solar charger.
Contact your service provider for details.
Connect the charger to a power source and the micro
USB connector to the port at the base of the phone,
under the USB/audio protective cover.
When the battery needs charging, the low battery alert
sounds and a Battery low message is displayed. The
phone will automatically switch off shortly afterwards.
You might be able to switch the phone on again, but
you cannot make or receive any calls until the battery
has been recharged or replaced.
attaching the wrist strap
Your phone is supplied with a wrist strap. To connect
the strap, remove the battery cover. Thread the small
loop through the entry point at the base of the phone.
Loop it over the anchor point to secure it and replace
the battery cover.
321
setting up your IsatPhone
02 welcome
03 safety
06 quick reference
09 getting started
09 package contents
09 settingupyourIsatPhone(3)
11 attachingthewriststrap
12 switching your phone on and off
12 setting the phone language and time zone
12 using info
12 accessing important information about
your phone
12 upgrading your phone
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
12
switching your phone on and off
To switch on, hold down the red key for a few
seconds until the screen lights up. The Inmarsat logo
will appear followed by the main screen. To switch off,
press and hold the red key for a few seconds.
Note: If you see the message Insert SIM, you must insert
a SIM card to use your phone. You will also be prompted
to enter the PIN code if one is set. The default setting
for the PIN code is off. See Setting up SIM PIN code
on page 46 for more information. Until a SIM card is
inserted, only a limited service is available. See Making
an emergency call on page 17 for more information.
setting the phone language
and time zone
The first time you turn on your phone, you will be
prompted to select your language. This will be the
display language. Select your language from a list
using the navigation keys and the centre selection key.
See Setting phone language on page 39 for more
information.
After you have selected your language, you will
be prompted to select your time zone. Your phone
automatically receives universal time (UTC) from GPS
satellites. By selecting the time zone, the phone’s clock
will display your local time. If you move into another
time zone, you will need to change this setting.
See Setting the time and Setting the time zone
on page 40 for more information.
using info
Important information about the status of your phone
is displayed in the information shortcut Info on the main
screen. These include missed calls, new messages,
voicemails, today’s organiser appointments, active
profile status, your phone number and your service
provider’s number. Info will pop up on the main screen
if you have missed a call or have new messages or
voicemails waiting. To access Info at other times, press
the centre selection key. When Info is open, use the
navigation keys to highlight the information you wish
to access and press the centre selection key to open.
accessing important information
about your phone
Important information about your phone is displayed
under Menu > Settings > About. These include
your model, firmware version, IMEI number and IMSI
number. You may need to supply this information
when contacting your service provider.
upgrading your phone
From time-to-time it may be necessary to upgrade your
phone’s software in order to improve its functionality
and operation. Inmarsat or your service provider will
contact you if your phone needs upgrading. Run the
CD supplied with your phone to download the firmware
upgrade tool and to access the “How to upgrade your
phone” guide. These are also downloadable from
inmarsat.com/isatphone.
02 welcome
03 safety
06 quick reference
09 getting started
09 package contents
09 setting up your IsatPhone (3)
11 attaching the wrist strap
12 switchingyourphoneonandoff
12 settingthephonelanguageandtimezone
12 usinginfo
12 accessingimportantinformationabout
yourphone
12 upgradingyourphone
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
13
Your IsatPhone makes and receives calls by
communicating with Inmarsat satellites in orbit above
the equator. Your phone antenna must be deployed
and there must be a clear line of sight to an Inmarsat
satellite for you to make and receive calls.
connecting to the satellite
Switch your phone on, hold down the red key for
a few seconds until the screen lights up. The Inmarsat
logo will appear followed by the main screen.
If prompted to enter a PIN, enter the PIN code. The
PIN is originally set by your service provider which you
can reset. See Setting up SIM PIN code on page 46
for more information.
Stand outside with a
clear view of the sky
with the phone antenna
pointing upwards. There
must be a clear line
of sight between the
phone’s antenna and the
satellite.
The more sky you can
see the stronger the
signal should be from
the satellite. If open sky
makes up about 70%
of your view when you
look up, then the signal
should be strong.
Searching satellite will appear on the screen. The
top left of the screen will display Inmarsat when your
phone is connected to the satellite.
The signal bars indicate the signal strength. At least
two signal bars are required to make and receive calls.
obtaining a GPS x
Before you can make a call, your phone needs a GPS
fix so it can be located by the satellite. This happens
automatically but if a new GPS fix is needed, the GPS
fix icon will be displayed. Keep the phone in the
open with a clear view of the sky until the icon
disappears. Your phone is now ready to make and
receive calls. See Obtaining a GPS fix manually on
page 29 for more information.
using your IsatPhone
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connectingtothesatellite
13 obtainingaGPSx
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
14
making and receiving calls
1. Switch on your phone by holding down the red key for several seconds.
2. Stand outside with a clear view of the sky and the antenna pointing upwards.
3. Check your phone is connected to the satellite network - Inmarsat is displayed at the top left of the screen.
4. Ensure you have at least two bars of signal strength.
5. Ensure there is sufficient battery power.
6. Ensure that your phone has a GPS fix – the GPS fix required icon is not displayed.
7. Dial the full international number and press the green key, eg. +44 1621 123456 .
8. To end a call, press the red key .
9. Switch off your phone by holding down the red key until the screen shuts down.
Making a call
Enter the full international number by dialling either
+ (hold down the 0 key for 3 seconds) or 00, country
code, area code (without the leading 0), telephone
number and press the green key , eg. 00 44 1621
123456 or + 44 1621 123456 . A Calling
message and the name of the person being called (if
listed in your Phonebook or SIM contacts) will display
on the screen. When the call is answered, the screen
will show the call time in minutes and seconds. To end
the call press the red key .
Making a call from saved contacts
Select Menu > Contacts > Phonebook. Scroll to
the desired name using the navigation keys, or enter
the first letter of the name in the search field. The
matching contacts will be listed. Highlight the name
and press the green key . See Phonebook, contacts
and organiser on page 31 for more information.
4321
making and receiving calls
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 makingandreceivingcalls(4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
15
Re-dialling a number
Press the green key , select from the list of
previously dialled numbers using the navigation keys
and press the green key to start the call. Your
phone stores 30 dialled numbers. Alternatively, select
Menu > Call log > Dialled calls, select the person you
wish to call and press the green key .
Re-dialling automatically
To switch Auto re-dial on or off, select Menu >
Settings > Call settings > Auto re-dial and make your
selection. The default setting is off.
When activated, if your call did not complete,
your phone displays Retry? and the reason why
the connection was unsuccessful. Press Select to
automatically re-dial the number three times until the
call is answered. If you press any key or receive a call
during this time, re-dialling is interrupted. If the re-dial
is successful the phone beeps, then rings. Select Close
if you do not want to retry.
Receiving a call
To receive a call, your antenna must be deployed and
your phone connected to the satellite. Press the green
key to accept the call or press the red key to
reject it. You will see Call from followed by either the
name of the caller (if listed in your Phonebook or SIM
contacts), the calling number, or Withheld.
If you do not wish your phone to play a ringtone,
set your active profile to silent or vibrate only. See
Sounds, ringtones and profiles on page 37 for more
information. To mute the ringing tone when a call
comes in, press Silence.
Declining a call
Press the red key . The call is disconnected and the
caller details are stored in Missed calls for later retrieval.
Returning a call
Your phone automatically stores the numbers of the
last 20 phone calls you have answered or missed.
To return a call, select Menu > Call log. Select the
appropriate folder, eg. Missed calls or Received calls,
highlight the contact and press the green key .
Making a call while on another call
You can put your current call on hold and make a
second call at any time. Select the contact by selecting
Options > Contacts > Phonebook or by dialling the
full international number. When you press the green
key , your current call will automatically be put on
hold. By selecting Swap you can switch between calls
at any time. You can end either call at any time by
selecting Options > End held call or End active call.
4321
making and receiving calls
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 makingandreceivingcalls(4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
16
Receiving a second call while on a call
The incoming call will be diverted to your voicemail
unless you have set up Call waiting. See Setting up
call waiting on page 20 for more information.
Using call waiting
When Call waiting is activated, a pop-up and
an audible alert will notify you if another caller is
calling you when you are on another call. When you
receive this alert you can press the green key
to accept the second call. The first call is placed on
hold automatically while the second call is taken. By
selecting Options > Swap you can switch between
calls at any time.
You can end either call at anytime by selecting
Options > End held call or End active call.
If you receive a third call while you have one active
and one held call, the name or number of the caller
will be displayed. Ending either the active or the held
call will automatically answer the new call.
If you wish to disconnect the first call to accept the
second, select Options > End active call.
If you do not wish to accept the second call, press the
red key . The call is disconnected and the caller
details are stored in Missed calls and Info for later
retrieval. If you do nothing, the second caller will be
diverted to your voicemail. If voicemail has not been
activated, then the call will appear as a missed call.
See Setting up call waiting on page 20 for more
information.
Making conference calls
Your phone can host conference calls with up to five
participants. To initiate a conference call, call the first
participant. When the first participant is connected, call
the second participant by selecting Options > Contacts
> Phonebook, select the second participant’s name and
press the green key . When the second participant
is connected, select Options > Conference. You are now
in a three-way conference call. Repeat for more participants.
To end a conference call, select End or press the red key .
To answer a new inbound call, press the green key
or select Options > Answer. The conference call will
be placed on hold. To place all participants into one
call, select Options > Conference.
To place an inbound call into conference without answering
it first, select Options > Add waiting to conference.
To disconnect individual conference callers, select
Options > Disconnect caller and press Select, or
the centre selection key. A list of the participants
is displayed. Select by highlighting their name or
number and press Select, or the centre selection key,
to disconnect them from the call.
To speak privately to one participant during a
conference call, select Options > Private with a caller
and select from the list. To resume the call with all
participants, select Options > Conference.
To put individual participants of a conference call on
hold, select Options > Hold conference party and
choose from the list of current callers displayed.
4321
making and receiving calls
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 makingandreceivingcalls(4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
17
Making an emergency call
Wireless phones, including IsatPhone Pro, operate
using radio signals, wireless networks, landline
networks, and user-programmed functions. Because
of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any
wireless device for essential communications like
medical emergencies. Emergency calling requirements
for satellite phones vary from country to country.
Always check your emergency contact numbers
and ensure they are stored on your phone before
travelling. Please contact your service provider for
specific country information.
To make an emergency call in the US, dial 911 or 112.
Your call will be put through to a call centre which will
connect you to the appropriate emergency service.
Alternatively, select Menu > Contacts > Emergency
numbers. An emergency call is free of charge. Prepay
users do not need a positive balance to make an
emergency call. Dialling 911 or 112 overides all
security locks and bars on your phone.
For details on emergency calling in the rest of the
world, please contact your service provider.
Using the volume control
The two volume keys on the side of the phone adjust
the call volume.
Muting a call
Select Options > Mute while on a call. To cancel,
select Options > Unmute.
Using loudspeaker
Select Loudspeaker at any time during a call.
calling handsfree
You can also use your phone in handsfree mode.
Place the phone on its side with the antenna pointing
upwards and use loudspeaker or a handsfree headset.
Loudspeaker can be activated at any time during the
call. To use the wired handsfree headset, connect it
to the audio port at the base of the phone, under
the protective cover. To use a Bluetooth headset,
see page 42 for more information.
4321
making and receiving calls
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 makingandreceivingcalls(4)
17 callinghandsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
18
using voicemail
You will be able to receive voicemail messages if your
service provider has enabled voicemail. Your phone
automatically checks for voicemails shortly after it has
been switched on and connected to the network. It
will also send you voicemails that arrive while you are
connected to the network.
If you have a new voicemail, the voicemail icon
will appear in the status bar at the top of the main
screen and in Info. To listen to the message, hold
down the key on the keypad for a few seconds
and your phone will automatically connect you to your
Inmarsat voicemail. Alternatively, you can dial the short
code 570 followed by the green key or the full
international number 00 870 772 001 899 or + 870
772 001 899 and the green key . Follow the spoken
instructions. The default language for voicemail is
English, but your service provider may have enabled
your voicemail in your chosen language. If you wish
to change the voicemail language, follow the spoken
instructions or contact your service provider.
additional call features
Viewing call length
Your phone logs the duration of outgoing and
incoming calls. Press the green key and Dialled
calls appears, which lists the date, time and duration
of each call. Use the navigation keys to access
Received calls and Missed calls. Alternatively,
select Menu > Call log and make your selection.
You may find the Call duration log useful for checking
the Last dialled call duration, and the total time of
Dialled calls.
To reset the counter, highlight the value you wish
to reset, select Options > Clear and press the left
navigation key labelled Select.
To reset all counters, select Options > Clear timers.
Setting the minute counter
Select Menu > Settings > Call settings > Minute
counter and select your preferred setting. The default
setting is off. When enabled, your phone will beep
after every minute of your call.
21
additional call features
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 usingvoicemail
18 additionalcallfeatures(2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
19
Setting up call summary
Select Menu > Settings > Call settings > Call
summary and then use the navigation and centre
selection keys to select On. The default setting is off.
When Call summary is activated, the date, time and
duration of the call is displayed.
Setting up and using speed dial
First, select Menu > Settings > Call settings > Speed
dialling and then use the navigation and centre
selection keys to select On. The default setting is off.
Eight speed dial slots are available, from 2-9. Speed
dial 1 is reserved for voicemail.
From the main screen, press and hold down for a
few seconds the number key that you would like to
associate with a contact. If the number is not yet
assigned, a pop-up will ask if you wish to assign a
contact to the key. Select Yes and a list of Phonebook
contacts is displayed. Use the navigation keys to
highlight the contact and then the contact’s details.
Press OK to save your selection.
Alternatively, select Contacts > Phonebook. Use the
navigation keys to highlight the contact name, press
the centre selection key to open or select Options >
Open. Highlight the number to which you would like
to assign the speed dial, eg. Mobile. Select Options
and select Assign speed dial. Highlight a speed dial
slot marked Unassigned, press the centre selection
key to assign the phone number to that speed dial
slot. To remove speed dial, follow the instructions
above and select Remove speed dial.
To speed dial, hold down the appropriate number
of the keypad for a few seconds and the phone will
automatically dial the number.
Setting any key answer
Select Menu > Settings > Call settings > Any key
answer and select On. The default setting is off. When
activated, press any key to answer a call.
Deleting all call logs
Select Menu > Call Log. Select Options > Clear all.
Press Yes to confirm.
21
additional call features
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
20
advanced call features
Advanced call features are controlled by the Inmarsat
network. To check or change these features, the
phone must be connected to the satellite with a signal
strength of at least two bars.
Sending your caller ID
Select Menu > Settings > Call settings > Send my
caller ID, then select On, Off or Set by network and
press OK. Set by network leaves it to the network
to select whether Caller ID is displayed. The default
setting is Set by Network.
When Send my caller ID is on, your caller ID will be
displayed on the recipient’s phone. If this feature
is switched off, your caller ID will be hidden and
Withheld displayed in its place.
Setting up call waiting
Select Menu > Settings > Call settings > Call
waiting, and select Activate. There may be a short
delay before the network responds. Activated will
appear when the setting has been enabled. The
Call waiting default setting is off. From the Call
waiting menu you can also select to Check status or
Deactivate. To use call waiting, see Using call waiting
on page 16 for more information.
Call barring
An IsatPhone Pro SIM card always uses an international
number format, + or 00, and the country code, 870.
Call barring prevents the following call types from
being made or received by your phone:
• Outgoing calls: bars all outgoing calls
• International calls: bars all outgoing calls
• International except to home: bars all outgoing calls
except to other Inmarsat numbers
• Incoming calls: bars all incoming calls
• Incoming outside home: bars all incoming calls
except from other Inmarsat numbers
If you are using a SIM card with local country
numbering, the call barring is as described by
the menu.
The first time you set up call barring, you will need to
reset the barring password. Select Menu > Settings
> Call settings > Call barring. Select Options and
navigate to Change barring pass code. Enter the
barring pass code and select OK. The default is 0000.
Enter a new four-digit pass code and select OK. Then
enter the new pass code again to confirm it.
You will need to enter this new pass code whenever
you change your call barring settings.
To cancel a bar, highlight that type of call in the Call
barring menu, select Options and select Cancel.
To cancel all call barring, select Options and select
Cancel all barring. To check the status of a call bar,
highlight that type of call in the Call barring menu,
select Options and select Check status.
321
advanced call features
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advancedcallfeatures(3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
21
The barring code can be entered incorrectly an
unlimited number of times. If you have forgotten your
code, please contact your service provider.
Note: Fixed number dialling, Call barring and
Call divert does not prevent emergency calling.
Call barring and Call divert cannot be active at
the same time.
Diverting calls
Select Menu > Settings > Call settings > Call divert.
Call divert allows you to forward incoming calls to
your voicemail or another phone number:
• Only voice calls – diverts any voice call to your
voicemail or another number
• Only data calls – diverts data calls to another phone
number
• Only fax calls – diverts fax calls to another phone
number
• If busy – when you are engaged on another call, this
option diverts calls either to your voicemail or to
another number
• If no reply – this option allows you to select how
long your phone should ring (up to 30 seconds)
before the call is diverted to your voicemail or
another number
• If out of reach – when you are out of reach of a
satellite signal this option diverts calls either to your
voicemail or to another number
• If not available – diverts all ‘If busy’, ‘If no reply’
and ‘If out of reach’ calls. If you assign a divert
number for any of these calls, that number will take
precedence over the ‘If unavailable’ divert number
After making your selection, you will be prompted to
enter the phone number or voicemail to which calls
are to be diverted. Select Options to select a number
from your phonebook.
To cancel call divert, highlight that type of call in the
Call divert menu, select Options and select Cancel.
To cancel all call diverts, select Options and select
Cancel all forwarding. To check the status of a call
divert, highlight that type of call in the Call divert
menu, select Options and select Check status.
Note: Fixed number dialling, Call barring and
Call divert does not prevent emergency calling.
Call barring and Call divert cannot be active at
the same time.
Fixed number dialling (FND)
When Fixed number dialling is activated, the user is
limited to dialling or texting only numbers stored in
the FND list. The default setting is off.
321
advanced call features
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advancedcallfeatures(3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
22
Activating and de-activating fixed
number dialling
Select Menu > Settings > Security, highlight Fixed
number dialling from the list and press the centre
selection key. Select On to activate and press the
centre selection key or OK. You will be prompted
to enter your PIN 2 code. The default PIN 2 is 9999.
See Setting up SIM PIN 2 code on page 46 for more
information. Contact your service provider if this code
was not specified or was reset at purchase.
To add a number to your list, select Menu > Contacts
> FND list and press the centre selection key. Press
Options and select either New FND contact or Copy
from phonebook. You will then be prompted for the
PIN 2 code.
FND list entries are stored on your SIM card. Only one
name and one contact number can be stored for each
entry.
Fixed number dialling can restrict your phone to a
certain prefix, as well as individual phone numbers.
To limit outbound calls or text messages to a specific
country or range of corporate numbers, create an FND
list entry with the international prefix and local prefix
you wish to allow, followed by the correct number of
remaining digits replaced by question marks. Press the
* key twice to enter a question mark.
Example: To limit calls to UK landlines, create an
FND list entry: +44??????????. Substitute any number
in place of the ? symbols while dialling or sending
a message.
When fixed number dialling is activated, your phone
still enables numbers stored in other areas of Contacts
to be viewed.
Using fixed number dialling
Select Menu > Contacts > FND list and the contact.
Select Call or Send message from Options.
To send email messages when fixed number dialling
is activated, the message centre number should be
added to the FND list. See Message settings on
page 28 for more information on finding your
message centre number.
Note: Fixed number dialling, Call barring and
Call divert does not prevent emergency calling.
321
advanced call features
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advancedcallfeatures(3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
23
messaging
Using the message menu
Select Menu > Messaging. Select any one of the
following options and press the centre selection key
or select Options > Open. The functions are:
• New message - to create a new message
• Inbox - to store received messages
• Outbox - to temporarily store messages waiting
to be sent. Messages are placed in Outbox, for
example, when your phone is not connected to the
network. If sent, messages will be stored in Sent. If
unsent, messages will be stored in Drafts
• Drafts - when a message is written but not ready or
able to be sent, the message is saved here
• Sent - to store the last 20 messages sent. If you do
not want your sent messages to be saved, select
Menu > Messaging > Options > Settings > Text
msg settings > Saving sent messages to off
• Saved messages - to store received messages
• Templates - If you regularly send similar messages,
you can set up a template. To do this, compose a
new message, select Menu > Messaging > New
message > Text message and compose the parts of
your message that will not change. Select Options >
Save as template. To compose a new text message
based on this template, select Menu > Messaging
> New message > Compose from template and
then select the template you would like to use.
Edit the text, add recipient and then select
Options > Send
• SIM messages - to store messages in SIM memory
Entering text
You need to enter text when composing a message,
adding a contact to your phonebook, adding an
appointment to your organiser or searching. Your
phone offers two types of text entry mode: predictive
and standard.
Using predictive text entry
Predictive text mode allows you to use less keystrokes
to type a word as it uses a built-in dictionary as a time-
saving feature.
For example, to type the word hello, you would only
use 5 keystrokes (one for each letter of the word).
When you type h (number 4 on the keypad) a list
appears on the screen. It is not necessary to select the
letter h as when you type e (number 3) the dictionary
begins to narrow down the words that begin with he.
Key number 5 twice to type ll, then number 6 for the
letter o. This will result in the dictionary selecting the
only known word with these sequential letters, ie. hello.
If the dictionary has a number of options for the same
keystrokes it will present a list of words. Use the down
arrow to scroll to the word you require and press the
centre selection key. As always, press the 0 key to
create a space between words.
654321
messaging
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging(6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
24
If the word you are typing is not in the dictionary,
Word not in dictionary appears. Press OK and select
Spell word, type the word you want to enter and press
Select. The new word is now saved in your dictionary
for future use.
You can change the text entry settings whilst
composing a message. Click and hold the # key. A
pop-up menu offers options to change the language,
text editing mode or to add a new word.
Note: To change the language of the dictionary used
while composing a text message, select Options >
Writing language.
Using standard (non-predictive) text entry
Standard text entry enables you to key text in
manually, letter by letter, without the phone
suggesting the word you are attempting to type.
To enter text, repeatedly press a number key, 2-9,
until the desired character appears. For numbers, hold
the key down longer until the number appears. To
insert a space, press the 0 key. For symbols such as
punctuation marks, press the * key and then use the
navigation keys to select from the menu. Press the #
key to change text editing and capitalisation.
To delete text, place the cursor to the right of the
character you wish to delete and select Clear. Move
the cursor around the message using the navigation
keys to insert or delete text anywhere in the message.
Selecting text entry mode
The icon at the top right of your screen displays your
choice of text entry mode and character case. The
default setting is standard text. If you want to change
the text entry mode press the # key repeatedly until
your chosen mode icon is indicated. The modes are:
Predictive mode – all capitalised
Predictive mode – initial capital only
Predictive mode – no capitals
Standard mode – all capitalised
Standard mode – initial capital only
Standard mode – no capitals
Standard mode – numbers only
Standard mode – symbols only
Creating a text message
The character limit for a text sent from your phone is
approximately 1600 Latin characters or 740 non-Latin
characters, ie up to 10 concatenations, including the
recipient’s telephone number.
654321
messaging
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging(6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
25
Select Menu > Messaging > New message > Text
message. A blank screen will appear. Compose
your message. See Entering text on page 23 for
more information. When you have finished, add
the recipient(s). If their details are already stored in
your Contacts select Options > Add recipient and
select the name from the list. Use the left and right
navigation keys to move between Phonebook and
SIM contacts.
If the recipient’s details are not stored, use the up
navigation key to move the cursor to the To: line. Enter
the recipient’s full international number. If you make a
mistake, use the left and right navigation keys to move
the cursor and Clear to delete a number.
When you have finished adding recipients, select
Options > Send or press the centre selection key.
If you want to save your message so you can edit or
send it later, select Options > Save, or select Options
> Exit and confirm that you want to save the text. The
message will be saved in the Drafts folder. When you
are ready to complete it, select Menu > Messaging >
Drafts.
Creating a text message for sending
to an email address
Your phone can also send text messages to email
addresses. Instead of displaying your name to the
recipient the message will display your details in the
following format:
From: your phone number@message.inmarsat.com
eg.
From: 870776XXXX@message.inmarsat.com.
The character limit for a text sent from your phone to an
email address is approximately 1600 Latin characters
or 740 non-Latin characters, ie up to 10 concatenations,
including the recipient’s email address.
Select Menu > Messaging > New message > Email
message. Compose your message. Recipients can
be added from stored contacts by selecting Options
> Add recipient. Only entries containing an email
address will be displayed.
To send your message to an email address which is
not stored, use the up navigation key to move the
cursor into the To: field and type the address. For
symbols such as the @ sign, press the * key and then
use the navigation keys to select from the menu.
After entering the address, wait for 5 seconds and
the phone will place a ; after the entry, allowing you
to enter another address. When you move the cursor
away from the To: field or open Options, your phone
will check the email addresses entered. If addresses do
not follow the format of a valid email address, they will
be deleted and an error message displayed.
Receiving text and email messages
Messages can be received when the antenna is
deployed and your phone is connected to the
network, even if you are on a call, or when incoming
calls are forwarded to another phone number.
654321
messaging
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging(6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
26
If your phone is switched off when a message is
received, the message is stored by the network until
your phone is switched on and registered with the
network. Delivery will be attempted for the duration
that your message remains in the network. To check
or change this setting, select Menu > Messaging >
Options > Settings > Text msg settings > Validity
period or Menu > Messaging > Options > Settings
> Email settings > Validity period. When you receive
a message on your phone, an unread message
icon will appear on the status bar. Info will pop-up and
display a list of unread messages. If you wish to read
the message later, press Close. To read the message,
select Menu > Messaging > Inbox. Alternatively, with
Info open, use the centre selection and navigation
keys to highlight and open Unread messages.
Incoming text messages accommodate the full 10
concatenations. However, incoming messages from
emails are restricted to approximately 160 Latin and
74 non-Latin characters. If the sender exceeds this
limit, the message will be truncated upon receipt.
Viewing your received messages
Inbox lists the last 20 messages received, including
message status (read or unread), the sender’s name or
number, the first words of the message and the date
received. Use the up and down navigation keys to
highlight a message and press the centre selection key
or select Options > Open.
Replying to sender
Open the message and select Options > Reply. A
new blank message will be displayed and the To: field
will automatically be completed.
Forwarding a message
Open the message and select Options > Forward
> Test message or Email message. The message is
displayed with the cursor flashing in the empty To:
field. Enter the recipient’s number or to add a contact
from the phonebook, press Options > Add recipient.
When the To: field is completed, select Options >
Send. A pop-up confirms that the message has been
sent. The sent message is stored in the Sent list.
Calling a number from a received message
Open the message and press the green key or
select Options > Call. After the number has been
called, the message is considered read and remains in
the inbox.
Saving details from a received message
Open the message and select Options > Address
clipboard. The sender’s number is displayed. Select
Options > Add to contacts. You can either Create
new or Update existing. Select which field to save the
number in the contacts list, complete other fields as
appropriate and select Options > Save. The contact
will be stored in Phonebook. See Creating a new
contact on page 31 for more information.
654321
messaging
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging(6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
27
Saving a received message
To save a received message, open the message you
wish to save and select Options > Copy to folder >
Saved messages.
Deleting messages
Select the message from the list displayed in any of
the message folders and select Options > Delete. A
pop-up will appear asking you to confirm the action.
Press Yes. To delete all the messages in the folder,
select Options > Delete all messages.
Setting up message groups
If you regularly send the same text or email message
to the same group of people, you can set up a group.
Select Menu > Contacts > Groups, then select
Options > Create new. Enter a name for your group
and select OK, followed by Yes. You can set up a
maximum of 20 groups, and the same contact can be
a member of more than one group.
To add members to a group, select Menu > Contacts
> Groups, highlight the group to which you would like
to add members and press the centre selection key.
Now select Options > Add member. This will retrieve
your phonebook. Highlight the name of the contact
you would like to add to the group and press the left
or centre selection key. A group can have any number
of contacts.
By selecting Options when a member of the group is
highlighted, you can also:
• Open the contact’s details
• Call the contact
• Send a Text message to the contact
• Remove from group to remove the contact from
this group
• View group list to view the members of each group
Assign group ringtone to give all members of this
group the same ringtone, so that you will be able to
recognise when a member of the group is calling you.
To send a text message to the whole group, select
Menu > Messaging > New message > Text message
or Email message > Options > Add recipient and
then press the right navigation key three times to
move between the tabs. Select the group from the list
and compose your message.
You can also add members to groups directly from
your phonebook. In your phonebook, simply highlight
the contact, select Options > Add to group, then
select which group to which you would like to assign
the contact. You can also see which members belong
to a group by selecting Options > Belongs to group.
Sending a text to a group of people
If you regularly send the same text to a group of
people, you can create a group in your phonebook.
To send the text to a group you have already set up,
select Options > Add recipient and then press the
right navigation key twice to display the list of groups.
654321
messaging
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging(6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
28
Using message settings
Select Menu > Messaging > Options > Settings >
Text msg settings or Email settings.
Text message settings:
Use same message centre: Always set to Yes.
SMSC management: Both specify the number to
which your phone will despatch your messages for
delivery.
Validity period: Specifies the length of time your
message will remain in the network, should it be
pending for delivery to the recipient.
Saving sent messages: The default setting is on.
The setting can be changed if required.
Long message sending: The default setting is on.
This allows approximately 1600 Latin or 740 non-Latin
characters to be sent ie. up to 10 concatenations.
Reply with original / Reply without original: The
sender’s original message is included/excluded as part
of any reply that you compose. The default setting is
off.
Set defaults: This resets all message settings.
Entering your service centre number
It is unlikely that you would need to enter or change
your service centre number unless advised to do so by
your service provider.
The number of your service centre is required in order
to send messages. In the unlikely event that this detail
is not on your SIM card, you can enter the number
yourself.
To enter a service centre number, select Menu >
Messaging > Options > Settings > Text msg settings
> SMSC management. If the phone number of your
service centre is displayed, select Options > Exit. If
there is no number in the display, select Options >
Edit and enter the full international number of the
service centre. You will be prompted to activate the
number. Press Yes. Your phone is now ready to send
and receive messages. Alternatively, select Menu >
Messaging > Options > Settings > Email settings >
Options > Edit and add the email centre number and
select Apply.
Setting a message delivery expiry period
If your message cannot be delivered, you can change
the length of time your message will remain in the
network. To check or change the expiry period select
select Menu > Messaging > Options > Settings >
Text msg settings > Validity period.
654321
messaging
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging(6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
29
using your GPS location
information
As well as locating your phone’s position for the
satellite, you can also view your GPS location and send
it as a text message or email.
Viewing your GPS location information
Select Menu > GPS position > Options > View
location information to view the date and time of
when your last GPS fix was taken and your latitude and
longitude at that time. Your exact location is indicated
with a white dot on the world map.
Displaying GPS in metric or imperial measures
Select Menu > GPS position. The Valid GPS fix
screen appears. Select Options > Set unit and make
your selection. The default setting is metric units.
Sending your GPS location
Select Menu > GPS position and select Options
> Send GPS location. The elapsed time since the
last GPS fix was obtained is displayed and you are
presented with two options. Select Send to use the
stored value or New to acquire a new GPS fix. Press
the red key to cancel. Make your decision on the
basis of any significant distance travelled since the
stored GPS fix was obtained. Note that requesting
a new fix will temporarily delay the sending of your
location.
When the GPS fix to be used has been acquired, select
Text message or Email message. Only editing of
the recipient field is permitted. Enter the destination
number or email address directly into the To: field, or
choose Options > Add recipient to select an existing
entry from Contacts. You are presented with the list of
Phonebook contacts. Use the left and right navigation
keys to select SIM contacts or Groups.
Obtaining a GPS fix manually
On rare occasions, your phone may continue to show
the GPS fix required icon, which means that a new
GPS fix is needed in order for your phone to connect
to the network. If this occurs, select Menu > GPS
position. The new GPS fix is displayed. When this
screen is open, your phone will attempt to refresh the
GPS fix every 30 seconds.
National GPS policies
Some national GPS policies do not allow users to
access their GPS information in particular locations.
Your phone continues to access the GPS satellites
as usual, so its performance is unaffected. However,
your phone will not display its GPS location. For more
information, please contact your service provider.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 usingyourGPSlocationinformation
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
30
prepay services
If you have a prepay subscription, your service
provider will have informed you of the services
available to you. Your phone also enables you to make
a balance enquiry and redeem prepay vouchers for
Inmarsat’s prepay service, free of charge.
Making a balance enquiry
From the main screen enter your balance enquiry
code, *106# and press the green key . Your current
balance and expiry date will be shown on the screen.
Redeeming a prepay voucher
From the main screen enter the top-up code,
*101*VoucherNumber#, eg.
*101*1234567890123456# and press the green key
. Your new balance and expiry date will be shown
on the screen.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advanced call features (3)
23 messaging (6)
29 using your GPS location information
30 prepayservices
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
31
phonebook, contacts & organiser
managing contacts
in your phonebook
Contacts can be stored in either your phone’s memory
via Phonebook or on your SIM card via SIM contacts.
Up to 300 contacts can be stored in the phonebook
and up to 250 on your IsatPhone Pro SIM card. To view
the contacts in your phone’s memory, select Contacts
from the main screen.
Creating a new contact
There are several ways to create a contact. From the
main screen type in the number to save, including
the full international code. Select Options > Add to
contacts > Create new contact. Define the number
you are saving, eg. Telephone, Office phone, Mobile
phone, Fax etc, then select Options > Save. The
saved contact details are displayed.
Alternatively, open the contacts directory either by
selecting Menu > Contacts or by selecting Contacts.
Highlight the location where you wish to save the
contact and press Select. The default setting is
Phonebook. You are presented with a list of stored
contacts, select Options > New contact. Enter the
first name, last name and the telephone number. If
you wish to save a contact detail other than phone
number, select Options > Add detail and select from
the list presented. After entering all relevant details,
select Options > Save or press the centre selection
key.
Finding a contact
You can find a contact in your phonebook either by
using the navigation keys to scroll through the list
of all contacts or by entering the first characters of a
contact’s name in the search field at the top of the list
of contacts. See Entering text on page 23 for more
information.
Opening a contact
Highlight the contact’s name in the phonebook and
press the centre selection key or select Options >
Open. Use the up and down navigation keys to select
a number.
Ordering contacts by first or last name
Select Phonebook > Options > Settings > Display
name order and then select either First last (to list
them alphabetically by first name) or Last first (to list
them alphabetically by last name).
Editing a contact
To change or add details for a contact already in your
phonebook, use the up and down navigation keys to
highlight the contact, then select Options and select
Edit. Move between the details using the navigation
keys. Edit the text or numbers. See Entering text on
page 23 for more information. To save the changes to
the contact, press the centre selection key and then
select Yes. Or select Options > Save > Yes.
21
managing contacts in your phonebook
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
31 managingcontactsinyourphonebook(2)
33 managing contacts on your SIM card
33 synchronising contacts with Outlook
33 sending and receiving contact details
34 your phone number
34 your service provider number
34 alarm
35 organiser
35 calculator
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
32
To discard changes, press the centre selection key
and when prompted to save changes, select No.
Alternatively, select Options > Save > No. See
Entering text on page 23 for more information.
Calling a contact
Highlight the contact’s name and press the green key
. If there is more than one number stored for that
contact (eg. office and mobile) select one of them
using the centre selection key.
Texting or emailing a contact
Highlight the contact’s name, select Options >
Send message. Select Text message or Email as
appropriate. Write your message and and select
Options > Send. If you are sending a text message
and there is more than one number stored for that
contact select one using the centre selection key.
Deleting a contact
Select Menu > Contacts or press Contacts. Select
from the list. Use the navigation keys to highlight the
stored contact that you would like to delete. Select
Option > Delete. You will be prompted to confirm the
deletion by pressing Yes.
Deleting all contacts
Open your phonebook, select Options, select Delete
all and then select Yes.
Duplicating a contact
Duplicating a contact can be a quick way to add a new
contact with similar details to an existing one.
Highlight the contact you wish to duplicate, select
Options > Duplicate and then amend the new
contact’s details. When you have finished, save the
new contact by pressing the centre selection key
followed by Yes.
21
managing contacts in your phonebook
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
31 managingcontactsinyourphonebook(2)
33 managing contacts on your SIM card
33 synchronising contacts with Outlook
33 sending and receiving contact details
34 your phone number
34 your service provider number
34 alarm
35 organiser
35 calculator
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
33
managing contacts on your
SIM card
Contacts can be stored on your SIM card as well as in
Phonebook. Storing contacts on your SIM card allows
you to move contacts from one phone to another.
Storing contacts on both the SIM card and the
phonebook allows you to back-up your contacts.
To view the contacts on your SIM card, select Menu
> Contacts > SIM contacts. You can navigate, edit,
delete, make calls or send texts in exactly the same
way as Phonebook.
To copy a contact from your SIM card to your
phonebook highlight the contact in SIM contacts,
select Options and select Copy to phonebook.
To copy all SIM card contacts to Phonebook, this
option arises when the SIM card is inserted. The first
time Contacts is accessed after inserting the SIM
card, you will prompted to Copy SIM contacts to
Phonebook and to confirm the action. Please note
that this process may take a little time.
To copy a contact from your phone’s memory to your
SIM card, select Phonebook and highlight the contact.
Select Options > Copy to SIM.
To delete all contacts from your SIM card, select Menu
> Contacts > SIM contacts > Options > Delete all.
To find out how many contacts are stored on your SIM
card and how many more you can add, select Menu >
Contacts > SIM Contacts > Options > SIM details.
synchronising contacts
with Outlook
The contact synchronisation tool, supplied with your
phone, enables you to transfer contact information
held in Microsoft Outlook or Outlook Express on
your PC with that stored on your phone. Run the
CD, supplied with your phone, to download the
Contact synchronisation tool and to access the “How
to synchronise your contacts” guide. These are also
downloadable from inmarsat.com/isatphone.
sending and
receiving contact details
To send a business card, highlight the appropriate
contact in your phonebook or SIM contacts folder and
select Options > Send business card. Select either
Text message or Email message. A text or email
message is displayed including all details stored for
this contact in the body of the message. Enter the full
international phone number of the recipient in the To:
field or select Options > Add recipient to specify a
stored contact. Select Options > Send.
21
sending and receiving contact details
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
31 managing contacts in your phonebook (2)
33 managingcontactsonyourSIMcard
33 synchronisingcontactswithOutlook
33 sendingandreceivingcontactdetails
34 your phone number
34 your service provider number
34 alarm
35 organiser
35 calculator
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
34
When you receive a business card, it will appear as
a normal message in your Inbox, but the title of the
message will be Business card. Highlight the message
and press the centre selection key or select Options >
Open. The contact details are presented like any other
entry in the phonebook. To save Business card details,
select Options > Create new or Update existing.
Business card details are saved to your phonebook.
Once the details have been saved, the original
message is deleted from your Inbox.
your phone number
From the main screen, open Info by pressing the
centre selection key and selecting My phone number.
Your phone number is usually programmed onto your
SIM card by your service provider. If not, the entry
will be blank. You can enter the number yourself by
selecting Menu > Contacts > My phone number. If a
SIM card is subsequently inserted with a stored phone
number, your entry will be overwritten.
your service provider number
Open Info by pressing the centre selection key and
selecting Service provider or for full details select
Menu > Contacts > Service provider. These details
are programmed onto your SIM card and are not
editable.
alarm
You can use your phone as an alarm clock. When set,
the alarm icon is displayed on the status bar. The
alarm will sound for 60 seconds at the same volume
as the phone is set to ring. If you do not press a key
while the alarm is sounding it will snooze for 9 minutes
before sounding again. This will continue until you
switch the alarm off.
The alarm can also be used to remind you of upcoming
events in your organiser. See Creating an entry in your
organiser on page 35 for more information.
Setting an alarm
Select Menu > Alarm and select the type of alarm.
Once alarm sounds the next time the clock shows
the selected time. Recurrent alarm sounds regularly,
on selected days of the week. Enter the alarm time
and select OK. If this is a recurrent alarm, use the
navigation and centre selection keys to tick which days
of the week it should sound, then select OK.
Silencing a ringing alarm
When the alarm sounds, select Stop or the centre
selection key. If you press the right selection key
Snooze, it will sound again in 9 minutes.
Cancelling an alarm
Select Menu > Alarm, select which alarm you would
like to remove, then select Options > Remove and
confirm your choice.
21
sending and receiving contact details
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
31 managing contacts in your phonebook (2)
33 managing contacts on your SIM card
33 synchronising contacts with Outlook
33 sending and receiving contact details
34 yourphonenumber
34 yourserviceprovidernumber
34 alarm
35 organiser
35 calculator
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
35
organiser
The organiser is a calendar allowing you to record and
view appointments and to set reminder alarms.
Browsing your organiser
Select Menu > Extras > Organiser to open your
organiser. The current month, with today’s date
highlighted, is displayed. An appointment is indicated
by a small green square in the corner of the calendar
entry. The indicator is red when the appointment is for
today. To view any particular day in detail, highlight
the day and then select Options > Open or press the
centre selection key.
Use the navigation keys to move between days and
months. To view a week at a time instead of a month
select Options > View week. If you would like to
view a date that is not displayed in the month or week
views, select Options > Go to date, enter the date
and select OK.
Creating an entry in your organiser
Select Menu > Extras > Organiser. Highlight the
relevant day using the navigation keys or Options >
Go to date and select Options > Create entry. Enter
the appropriate details and select Options > Save.
When the alarm is set to on, at the specified time, the
appointment subject name will display and an alert will
sound. The day’s appointments are listed in Info.
Personalising your organiser
Select Menu > Extras > Organiser > Options >
Organiser settings. From this menu you can change:
• Calendar view – view by month, week or day
• Alarm tone – if this is set to off, the appointment’s
name will be displayed at the specified time, but the
alarm will not sound
• Week start day – start day for week and month
views
• Week view title option – week view displayed by
day or week number
• Auto erase option – automatically deletes past
appointments or after a specified duration
calculator
The phone’s calculator allows you to carry out simple
mathematics using the phone’s keypad and the on-
screen icons.
Select Menu > Extras > Calculator. Enter numbers
using the keypad. Use the navigation keys to highlight
operations such as + or -, and select them with the
centre selection key. For a decimal point, either select
the . icon, or press * on the keypad.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
31 managing contacts in your phonebook (2)
33 managing contacts on your SIM card
33 synchronising contacts with Outlook
33 sending and receiving contact details
34 your phone number
34 your service provider number
34 alarm
35 organiser
35 calculator
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
36
data
data, modem, email and fax
The ‘How to’ guide is downloadable from
inmarsat.com/isatphone
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
37
personalised settings
sounds, ringtones and proles
Your current sound profile is always displayed in
the status bar of the main screen, and can also be
accessed via Info.
To change your phone’s sound profile, select Menu >
Profiles, and highlight the one you want and press the
centre selection key. There are four sound profiles:
• General – for everyday use
• Silent – no vibration or sound
• Loud – for noisy environments
• Vibrate only – vibration and no sound
You can customise any of these profiles by highlighting
it, selecting Options and selecting Personalise. This
allows you to change the following aspects of the
sound profile:
• Vibrate mode – on or off
• Alert volume – sound level
• Keypad volume – sound level when a key is pressed
• Alert ring mode – constant, ring once, beep, silent
or increasing volume
• Ringtone – the sound your phone makes when it
receives a call
• Key sound – the sound your phone makes when a
key is pressed
• Message alert – the sound your phone makes when
it receives a text message
Highlight the setting you would like to change, press
the left or centre selection key, use the navigation keys
to alter the setting and press Select.
To restore the default settings for a sound profile,
highlight the profile, select Options > Reset to default.
Selecting a ringtone
Each profile can play one of 8 ringtones to notify you
of an incoming call.
Select Menu > Profiles and highlight the appropriate
profile. Select Options > Personalise > Ringtone
from the list and press Select or the centre selection
key. The current ringtone for the profile is played
and highlighted in the list. Use the navigation keys to
highlight and hear the other ringtone files available.
Press Select or the centre selection key to specify the
highlighted ringtone.
If no sound is heard when you highlight a ringtone,
the Alert volume for your profile may be set to 0. This
is the default for both Silent and Vibrate only. To
change the ringtone volume, select Back to return to
Profiles. Highlight Alert volume and press Select.
21
sounds, ringtones and proles
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds,ringtonesandproles(2)
39 setting phone language
40 setting date and time
40 setting time zone
41 customising display settings
41 setting up keypad lock
41 setting up phone lock
42 bluetooth (2)
43 operating a closed user group (CUG)
43 reset all settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
38
Allocating a unique ringtone to callers
You can allocate a specific ringtone to a contact.
Regardless of the active profile, the allocated ringtone
will be used for the specified caller, but the alert
volume of the active profile will be respected.
Highlight the desired contact entry in your Phonebook
or SIM contacts and press the centre selection key
or select Options > Open. Highlight the relevant
contact detail and select Options > Assign ringtone.
From the list of available ringtones, highlight your
preference and press Select. The name of the ringtone
will be displayed under the contact detail specified.
To remove an associated ringtone, open the contact
entry, highlight the ringtone and select Options >
Remove ringtone.
Setting phone and writing language
The display and writing language of the phone can be
changed by selecting Menu > Settings > Language.
Highlight any of the following options and press
Select:
• Phone language — to set the display language
of the phone
• Writing language — to set the texting language
of the phone
• Predictive text — to set the text editing mode
for composing messages
21
sounds, ringtones and proles
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds,ringtonesandproles(2)
39 setting phone language
40 setting date and time
40 setting time zone
41 customising display settings
41 setting up keypad lock
41 setting up phone lock
42 bluetooth (2)
43 operating a closed user group (CUG)
43 reset all settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
39
setting phone language
The first time you switch on your phone, you will be
prompted to select the display language. You can
change this at any time. Select Menu > Settings >
Language > Phone language, highlight the desired
language and press the left or centre selection keys.
If you do not understand your phone’s current
language setting, follow these directions to navigate
to the Phone language menu.
• Press the red key to return to the main screen
• Press the left selection key to go to the menu screen
• Press the down navigation key twice to highlight the
Settings icon
• Press the centre selection key to open Settings
• Press the down navigation key twice to highlight the
Language icon and press the centre selection
key
• Press the centre selection key and use the
navigation keys to highlight the correct language
and press the centre selection key again to change
the phone’s language
Setting writing language
Select Menu > Settings > Language > Writing
language. Select the desired language and press OK.
Setting predictive text
The predictive text setting is used to set the text
editing mode for composing messages. Select Menu
> Settings > Language > Predictive text. Select
Available or Hidden. The default setting is available.
See Using predictive text entry on page 23 for more
details.
Changing keypad
Your phone is supplied with a Latin keypad as
standard. Dual-alphabet keypads are available in Latin
with Arabic, Chinese, Japanese or Russian characters.
If your phone does not have your preferred keypad,
contact your service provider.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds, ringtones and proles (2)
39 settingphonelanguage
40 setting date and time
40 setting time zone
41 customising display settings
41 setting up keypad lock
41 setting up phone lock
42 bluetooth (2)
43 operating a closed user group (CUG)
43 reset all settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
40
setting date and time
Your phone automatically receives UTC time from
GPS satellites. The first time you use your phone, you
will be prompted to select a language from the list,
followed by the option to select your local time. When
completed, local time will be displayed on the status
bar.
You will need to reset the time when you travel to
different time zones. The Date and time menu lets
you change the date and time format.
Setting the time
Select Menu > Extras > Date and time > Time
settings.
Setting the date
Select Menu > Extras > Date and time > Date
settings.
setting the time zone
You may wish to change the local time zone on your
phone if you move to a new location or if your new
phone is not displaying the correct time zone. You may
also wish to know the time in another location, eg.
your head office.
Setting the local time zone
Select Menu > Extras > World time. The world
time map appears. Select Options > Select > Local
time zone. Use the navigation keys to highlight the
required time zone and press Select.
Setting the remote time zone
Select Menu > Extras > World time. Select Options >
Select remote time zone. Use the navigation keys to
highlight the required time zone and press Select.
Setting daylight saving time (DST)
Select Menu > Extras > World time. Select Options
and select from a list to enable/disable local/remote
DST. DST is displayed as 0 or +1 on the world map.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds, ringtones and proles (2)
39 setting phone language
40 settingdateandtime
40 settingtimezone
41 customising display settings
41 setting up keypad lock
41 setting up phone lock
42 bluetooth (2)
43 operating a closed user group (CUG)
43 reset all settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
41
customising display settings
Lighting the keypad and screen
The backlights for the screen and keypad can be
controlled by going to select Menu > Settings >
Display. Select any one of the following options and
press Select to save your changes.
• Brightness – to set the brightness of the screen
• Screen light – to set the duration for screen
backlights
• Keypad light – to set the duration for keypad
backlight
• Screen standby – to set the duration for the screen
backlights after the last keystroke
setting up keypad lock
The keypad lock disables the keypad and prevents
accidental dialling. When activated, the phone will
respond to the green and red keys to answer
or reject call.
Select Menu > Settings > Security, select Automatic
keypad lock, and then select the duration before the
keypad is locked. Deactivate the automatic keypad
lock using the same menu.
To lock the keypad, ensure the main screen is
displayed, press the centre selection key followed by
the * key within 3 seconds. The keypad locked
icon is displayed on the status bar.
To unlock the keypad, press the centre selection key
followed by the * key on the keypad within 3 seconds.
setting up phone lock
Phone lock protects your phone against unauthorised use.
Select Menu > Settings > Security and select Phone
lock. Specify the idle period, from 30 seconds to 30
minutes, after which time the phone will automatically
lock. You will be prompted to Enter phone lock code.
To unlock the phone, enter the code when prompted.
The default admin code is 123456. See Setting up
the admin code on page 45. The new setting will be
accepted when the code is accepted.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds, ringtones and proles (2)
39 setting phone language
40 setting date and time
40 setting time zone
41 customisingdisplaysettings
41 settingupkeypadlock
41 settingupphonelock
42 bluetooth (2)
43 operating a closed user group (CUG)
43 reset all settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
42
bluetooth
The Bluetooth connection on your phone allows you
to connect wirelessly to a Bluetooth headset enabling
you to use the phone in handsfree mode.
To activate Bluetooth connectivity select Menu >
Settings > Bluetooth. Select Settings > Bluetooth
and select On. The Bluetooth icon indicator
appears in the status bar.
Connecting a new Bluetooth device
The first time you use a particular Bluetooth headset
with your phone, you will need to pair the phone and
the headset. Ensure the Bluetooth headset is switched
on before you begin.
Select Menu > Settings > Bluetooth > Paired
devices. A list of Bluetooth devices in range of your
phone will appear on the screen. If the device does
not appear, select Options and select Search for
devices from the new menu that appears. Searching...
will be displayed at the top of the screen, followed by
the names of all the devices in range. A blue tick will
be displayed next to any devices already paired with
your phone.
Select the device you want to pair and enter its pass
code. Bluetooth devices such as headsets generally
have their pass code set in the factory and printed
either on the device or its packaging. Some devices
allow you to set the pass code yourself.
The device should now be listed in the Paired devices
menu. Highlight it and press the left selection key,
then select Connect from the menu. The device
should now be listed on the Connected devices
menu accessed from the Bluetooth menu. This
icon indicates that your phone is connected with a
Bluetooth headset.
Whenever the device attempts to make a connection
with your phone, you will be prompted whether you
want to accept the connection. To automatically
accept connection requests from a particular device,
highlight it in the Paired devices menu, select
Options and select Set as authorised. You should
only authorise devices that belong to you, or that you
trust. If you no longer want a device to be authorised,
select Set as unauthorised.
To connect a different headset, you must disconnect
the current headset. Highlight the device on the
Connected devices menu, select Options and select
Disconnect.
If you no longer want a headset to be paired with your
phone, highlight it on the Paired devices menu, select
Options and then select Delete.
Other choices in the Options menu are Rename,
which allows you to select a more descriptive name for
your headset, and Device attribute, which displays
the headset’s name, and the time and date at which
it was connected.
21
bluetooth
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds, ringtones and proles (2)
39 setting phone language
40 setting date and time
40 setting time zone
41 customising display settings
41 setting up keypad lock
41 setting up phone lock
42 bluetooth(2)
43 operating a closed user group (CUG)
43 reset all settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
43
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone’s visibility > Invisible.
This prevents unauthorised connection. Do not pair
with an unknown device.
Setting up Bluetooth lock
If Bluetooth lock is enabled, the phone will require the
admin code to be entered before Bluetooth settings
can be changed. See Setting up the admin code on
page 45 for more information. The default setting is off.
To enable or disable this feature, select Menu >
Settings > Security and select Bluetooth lock from
the list. Select On or Off and then enter Admin code.
operating a closed user group (CUG)
The Closed User Group (CUG) service allows you
to form closed user groups from which access is
restricted. A user may be a member of one or more
CUGs. Members of a specific CUG can communicate
amongst themselves but not, in general, with users
outside the group. This feature is operated by your
service provider who will provide further instructions
on its use. The default setting is off.
To enable, select Menu > Settings > Security >
Closed user group, select On, enter your CUG
number and press OK.
Group numbers range from 0-9. If the CUG is on,
the CUG index icon appears on the status bar.
reset all settings
Select Menu > Settings > Reset settings. You will be
prompted for the Admin code in order to make this
change. See Setting up admin code on page 45 for
more information. Returning to default settings will
not affect your admin or user codes, PINs, organiser
entries, contacts, messages or call logs. To return
these to default setting or to delete these entries see:
• Setting up SIM PIN code on page 46
• Setting up SIM PIN 2 code on page 46
• Deleting a contact on page 32
• Deleting SIM contacts on page 33
• Deleting messages on page 27
• Deleting all call logs on page 19
21
bluetooth
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
37 sounds, ringtones and proles (2)
39 setting phone language
40 setting date and time
40 setting time zone
41 customising display settings
41 setting up keypad lock
41 setting up phone lock
42 bluetooth (2)
43 operatingaclosedusergroup(CUG)
43 resetallsettings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
44
security
Security features Action Default Default Code
controlled by setting code length
the phone
Keypad lock Only the green and red keys are active Centre
selection
key and *
Admin code Creates Phone lock Off 123456 6 digits
Restricts access to Bluetooth
Restricts access to Reset settings
Creates User code Off 4-6 digits
the SIM card
PIN Restricts access to SIM card Off 8888 4-8 digits
PIN 2 Restricts access to Fixed number dialling Off 9999 4-8 digits
the network
Barring password Restricts access to Call barring Off 0000 4 digits
security locks and codes
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
44 securitylocksandcodes
45 security features controlled by the phone
46 security features controlled by the SIM card
46 security features controlled by the network
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
45
Setting up the admin code
Select Menu > Settings > Security and select Admin
code. You will be prompted for the current code. The
default setting is 123456. When this is accepted, you
will be prompted to enter your new code and then
confirm it. The code must be 6 digits long. If you lose
your admin code, contact your service provider. The
default setting is off.
The admin code can be entered incorrectly an
unlimited number of times. If you have forgotten
your code, contact your service provider.
Setting up the user code
Select Menu > Settings > Security and select User
code. You will be prompted to enter the 6-digit Admin
code. Once this is accepted, you will be prompted to
create a new user code and to confirm it. The code
can be 4-6 digits in length. The default setting is off.
The user code can be entered incorrectly an unlimited
number of times. If you have forgotten your code,
contact your phone’s administrator.
Security can be controlled by the phone, the SIM card
or the Inmarsat network. This enables you to match
security requirements to your needs. The keypad lock
prevents accidental dialling; the phone lock prevents
an unauthorised user from using your phone even if
they replace the SIM card. The SIM PIN prevents an
unauthorised user from using your SIM even if they
place it in another phone. The admin code restricts
access to particular features on the phone. For
example, an individual might only wish to activate the
keypad lock. A corporate organisation might choose
to restrict functions available to their employees by
activating the admin code and issuing a user code.
security features controlled
by the phone
Access to your phone can be restricted by the keypad
lock to prevent accidental dialling (see Setting up
keypad lock on page 41 for more information) or by
activation of the admin code.
The admin code can be activated to create a Phone
lock, restrict access to Bluetooth lock, Reset settings
and to create a User code so that a third party can
use the phone but not have access to the restricted
features. See Setting up Bluetooth lock on page 43
and Reset all settings on page 43 for more information.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
44 security locks and codes
45 securityfeaturescontrolledbythephone
46 security features controlled by the SIM card
46 security features controlled by the network
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
46
security features controlled
by the SIM card
Access to your SIM card can be restricted by activating
its PIN code. The advanced call feature, Fixed number
dialling, can be protected by your SIM PIN 2 code.
See Fixed number dialling on page 21 for more
information.
Setting up SIM PIN code
Select Menu > Settings > Security > PIN request
and select On. You will be asked to enter your SIM’s
PIN code. If you make an error entering the number,
press Cancel to clear the digits and re-enter. Press the
centre selection key or OK. The default 4-8 digit code
for SIM PIN is 8888. The default setting is off.
To change the PIN code stored on your SIM card,
select Menu > Settings > Security > Set PIN. Enter
the existing PIN code, then the new PIN. Repeat the
new PIN to confirm it.
If the PIN code is entered incorrectly three times, your
SIM card can only be unlocked using the PUK code.
Contact your service provider if you do not have a
record of your PUK code. If the PUK code is entered
10 times incorrectly the SIM will lock and you should
contact your service provider. The default setting for
PIN is off.
Setting up SIM PIN 2 code
The default 4-8 digit code for PIN 2 is 9999.
The default setting is off.
If the PIN 2 code is entered incorrectly three times,
your SIM card can only be unlocked using the PUK 2
code. Contact your service provider if you do not have
a record of your PUK 2. If the PUK 2 code is entered
10 times incorrectly the SIM will lock and you should
contact your service provider. To change the PIN 2
code, select Menu > Settings > Security > Set PIN
2. Enter the existing PIN 2 code, then the new PIN 2
code. Repeat the new PIN 2 code to confirm it.
security features controlled
by the network
When enabled, the advanced call feature, Call barring,
is protected by a code. The default setting is off. See
Call barring on page 20 for more information.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
44 security locks and codes
45 security features controlled by the phone
46 securityfeaturescontrolledbytheSIMcard
46 securityfeaturescontrolledbythenetwork
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
47
troubleshooting
My phone will not switch on • Check if the battery is inserted correctly
• Check if the battery needs charging. Charging for 20 minutes should provide
enough power to switch the phone on
• If the battery does not charge it has probably exceeded its usage period and
you will need to replace it with a new one
My phone cannot make
or receive calls
• Ensure the SIM card is inserted in the phone and is fully provisioned by your
service provider
• Check you have a valid GPS fix (See Using your GPS location information on
page 29 for more information)
• Ensure the phone’s antenna is fully extended and you have a clear line of
sight to the satellite. See Connecting to the satellite on page 13 for more
information. A least two signal bars are required to make and receive calls
• If you have less than two bars signal strength, rotate the phone and angle
the antenna until the signal strength increases and you are able to make and
receive calls
• If the phone has sufficient signal strength and cannot make or receive calls,
check if Call barring (page 20), Diverting calls (page 21) or Fixed number
dialling (page 21) have been activated
• If you have a prepay subscription, check your prepay balance to ensure
you have sufficient credit to make a call. See Making a balance enquiry
on page 30 for more information
• Contact your service provider if you are unable to resolve the problem
Problem Solution
321
troubleshooting
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
48
My phone cannot receive
a text message
• The phone can store a maximum of 20 messages in its memory. If the
memory is full, delete a few texts to free up memory for new messages.
See Deleting messages on page 27 for more information
• If you still cannot receive a text, your service centre number may not be
correct. See Entering your service centre number on page 28 for more
information or contact your service provider
My phone continues to
display Searching satellite…
• Ensure your phone’s antenna is fully extended
• Ensure your phone’s antenna is pointed towards the satellite. Press Help for
onscreen guidance. Consult the Coverage map on page 8 to ensure you are
within coverage
• Ensure there is a clear line of sight to the satellite with no obstacles which
could block the signal. See Connecting to the satellite on page 13 for more
information
• Contact your service provider if you are unable to resolve the problem
My phone displays
a language I do not
understand
• Press the red key to return to the main screen
• Press the left selection key to go to the menu screen
• Press the down navigation key twice to highlight the Settings icon
• Press the centre selection key to open Settings
• Press the down navigation key twice to highlight the Language icon
and press the centre selection key
• Press the centre selection key and use the navigation keys to highlight the
correct language and press the centre selection key again to change the
phone’s language
Problem Solution
321
troubleshooting
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
49
My phone does not display
a GPS position
• Some national policies do not allow users to access their GPS information
in particular locations. Your phone continues to access the GPS satellites as
usual, but your phone will not display its GPS location
My phone does not seem to
receive voicemails
• Ensure your service provider has enabled voicemail
• If you have not used your phone and connected to the network for some
time, it may be that your voicemails have been automatically deleted from
the network. Ensure that you connect to the network at regular intervals
My phone and/or SIM has
been lost or stolen
• Contact your service provider as soon as possible so your phone and/or SIM
can be barred
How do I contact my service
provider?
• Your service provider number is stored on your SIM card. To view your
service provider open Info by pressing the centre selection key and selecting
Service provider
Problem Solution
321
troubleshooting
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
50
care and maintenance
caring for your IsatPhone Pro
Your IsatPhone is a highly sophisticated
electronic device. Complying with the following
recommendations will help you to protect your
warranty coverage and extend your phone’s life:
• Keep your phone dry. Liquids or moisture can
contain minerals that will damage electronic circuits.
If your phone does get wet, dry it with a soft
absorbent cloth as soon as possible, remove the
battery and allow your phone and battery to dry
completely before replacing it
• The connector covers are intended to protect
your phone. When the connectors are not in use,
keep these covers firmly closed at all times. Ensure
that the connectors are free from dust or dirt
before connecting any accessory. When closing
the connector cover, ensure the area around the
connectors, and the rubber sealing surfaces of the
cover are clean and free from dirt. Ensure that the
cover is fully closed to give maximum protection to
your phone
• Do not store your phone in dusty, dirty or damp
areas as this may shorten its life
• Do not store your phone in direct sunlight, or in
places where the sun’s heat can be focused, like on
the dashboard of a vehicle
• Do not store your phone and battery in extreme
cold and hot areas exceeding a temperature
range of -20ºC to +70ºC (-4ºF to +158ºF). Extreme
temperatures can shorten the life of your phone and
damage the battery
• Your phone’s operating temperature range is
–20°C to +55°C (-4°F to +131°F). The charging
temperature range is 0°C to +45°C (+32°F to +113°F)
• If you are carrying a separate battery, keep it inside
the plastic bag supplied. Always keep batteries
separated from other metallic objects and keep it
dry to prevent damage
• If your phone displays Battery overheating, switch
it off and place in a cool area
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean your phone
• Do not paint your phone
• Do not attempt to disassemble your phone or
undertake repairs yourself
• Use only the Inmarsat-supplied or an approved
replacement antenna. Unauthorised antennas,
modifications or attachments could damage the
device and may violate regulations governing
radio devices
21
care and maintenance
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
50 caringforyourIsatPhonePro(2)
51 certications
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
51
• Use only Inmarsat-supplied or approved batteries,
and recharge your battery with Inmarsat-supplied
or approved chargers for the phone
• Unplug the charger from the power socket and your
phone when not in use. Do not leave a fully-charged
battery connected to a charger, as overcharging
may shorten its life. The battery can be charged and
discharged hundreds of times, but it will eventually
wear out. Batteries gradually lose their charge even
when the phone is completely switched off. When
the talk and standby times are noticeably shorter
than normal, replace the battery
• When using any cable connections with your phone,
ensure that it cannot be stepped on, tripped over or
otherwise subjected to damage or stress
• Upgrade your phone’s firmware when advised to do
so by Inmarsat or your service provider
These suggestions apply equally to your phone,
battery, chargers, and any accessory. If your phone is
not working properly, contact your service provider
certications
Your IsatPhone Pro is certified with an Ingress
Protection rating of IP54, which means that your
phone is resistant to dust and splashing.
21
care and maintenance
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
50 caringforyourIsatPhonePro(2)
51 certications
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
52
regulatory and compliance
IsatPhone Pro is in conformity with the following
standards and/or normative documents:
Health and Safety: EN 60950-1, EN 50360, EN 50361
EMC: EN 301 489-1, EN 301 489-17, EN 301 489-20
Spectrum: EN 300 440, EN 301 328, EN 301 681
The technical files relevant to the above declaration
are held at Inmarsat Global Limited, 99 City Road,
London EC1Y 1AX, United Kingdom.
european declaration of conformity and CE marking
0168 Inmarsat Global Limited hereby declares that IsatPhone Pro is in conformity
with the essential requirements and other relevant provisions of the R&TTE
Directive (1999/5/EC).
A copy of the original Declaration of Conformity can be found at:
inmarsat.com/isatphone.
BABT Forsyth House, Churchfield Road, Walton-on-Thames,
Surrey, KT12 2TD, United Kingdom.
Restrictions on use In France, outdoor use of Bluetooth must be limited to 10 mW EIRP within the
of IsatPhone Pro in frequency band 2454 MHz to 2483.5 MHz.
the European
Economic Area In Italy, outdoor use of Bluetooth outside one’s own premises requires
a general authorisation.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
52 europeandeclarationofconformity
andCEmarking
53 FCC Part 15 declaration
53 GMPCS
53 Industry Canada
54 disposal of electrical and electronic
equipment and batteries within the
European Economic Area
54 RoHS compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
53
FCC Part 15 declaration
IsatPhone Pro complies with Part 15 of the FCC Rules
and, as such, operation is subject to the following two
conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received,
including interference that may cause undesired
operation
Note: This equipment has been tested and found
to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a residential environment. This equipment
generates, uses, and radiates radio frequency energy,
and if not installed and used in accordance with the
instructions, may cause harmful interference.
If this equipment does cause interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference as
follows:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and the receiver
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio/TV
technician for help
FCC caution: Under 47 CFR §15.21, changes
or modifications not expressly approved by the
manufacturer could void the user’s authority to operate
the equipment.
GMPCS
IsatPhone Pro carries the International
Telecommunication Union (ITU) Global Mobile
Personal Communications by Satellite (GMPCS)-MoU
mark.
Industry Canada
This Class B digital apparatus complies with Canadian
ICES-003.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
52 european declaration of conformity
and CE marking
53 FCCPart15declaration
53 GMPCS
53 IndustryCanada
54 disposal of electrical and electronic
equipment and batteries within the
European Economic Area
54 RoHS compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
54
disposal of electrical and electronic
equipment and batteries within the
European Economic Area
Directive 2002/96/EC regulates the disposal of
electrical and electronic equipment in the EU and
Directive 2006/66/EC regulates the manufacture and
disposal of batteries in the EU. Inmarsat has joined
an EU certified Producer Compliance Scheme (PCS)
to meet its obligations as a producer under these
Directives.
Electronic equipment and batteries should not be
included as household waste but should be left at
an appropriate collection point for recycling. This
helps prevent potential negative consequences for
the environment and human health. Check local
regulations by contacting your local city office, your
household waste disposal service, the vendor of
your phone or calling Inmarsat’s or your local service
provider’s call centre. Do not attempt to remove
internal batteries. Internal batteries shall be removed
only by a waste treatment facility or trained service
professional.
The crossed out wheeled-bin symbol on IsatPhone
Pro and its rechargeable battery reminds you that all
electrical and electronic products and batteries must
be taken to separate collections at the end of their
working life. This applies to the EU and other locations
where separate collection systems are available.
RoHS compliance
IsatPhone Pro complies with the EC Directive on the
restriction of the use of certain hazardous substances
in electrical and electronic equipment 2002/95/EC (RoHS).
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
52 european declaration of conformity
and CE marking
53 FCC Part 15 declaration
53 GMPCS
53 Industry Canada
54 disposalofelectricalandelectronic
equipmentandbatterieswithinthe
EuropeanEconomicArea
54 RoHScompliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
55
disclaimers
This user guide is published by Inmarsat without any
warranty. Except as provided by applicable law and in
the IsatPhone Pro end-user warranty, no warranties of
any kind, either express or implied, including, without
limitation, the implied warranties of satisfactory quality,
merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or
completeness of this user guide. Inmarsat reserves the
right to make changes to this user guide at any time
and without prior notice.
All illustrations are for illustration only and are not
an accurate depiction of an actual IsatPhone Pro.
All rights are reserved.
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
56
Inmarsat provides the following in-box accessories
with the IsatPhone Pro:
• Battery
• CD
• Mains charger and four universal plug adaptors
• Car charger
• Micro USB cable
• Wired handsfree headset
• Wrist strap
Inmarsat reserves the right to add or delete
accessories from this list in our absolute discretion.
accessories
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
57
IsatPhone Pro and in-box accessories may contain
commodities, technology and/or software subject
to export controls and regulations imposed by the
US and other countries. Diversion contrary to law
is prohibited.
export controls
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
58
Malicious software (also commonly referred to as
malware) is software that can harm the phone or
other computers. Malware or harmful applications can
include viruses, worms, spyware, and other unwanted
programmes.
While the phone does employ security measures
to resist such efforts, Inmarsat does not warrant or
represent that the phone will be impervious to the
introduction of malware. You can, however, reduce
the risk of malware attacks by exercising care when
downloading content or accepting applications,
refraining from opening or responding to messages
from unknown sources, using trustworthy services to
access the Internet, and only downloading content
to IsatPhone Pro from known, reliable sources.
malware
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
59
IsatPhone Pro has the capability to download,
store and forward additional content. The use of
such content may be restricted or prohibited by
rights of third parties, including but not limited to
restriction under applicable copyright laws. You, and
not Inmarsat, are entirely responsible for additional
content that you download to or forward from your
phone.
Prior to your use of any additional content, please
verify that your intended use is properly licensed or is
otherwise authorised. Inmarsat does not guarantee the
accuracy, integrity or quality of any additional content
or any other third party content.
Under no circumstances will Inmarsat be liable in any
way for your improper use of additional content or
other third party content.
downloading content
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
60
INMARSAT is a registered trademark of the
International Mobile Satellite Organisation; the
Inmarsat LOGO is a registered trademark of Inmarsat
(IP) Company Limited. Both trademarks are licensed to
Inmarsat Global Limited.
Bluetooth is a trademark or a registered trademark
of Bluetooth SIG Inc. and any use of such mark by
Inmarsat is under licence.
Microsoft Outlook, Microsoft Outlook Express,
Microsoft Windows Vista SP1, Microsoft Windows XP
Pro SP3 are trademarks or registered trademarks of
Microsoft Corporation in the United States and other
countries.
Other product and company names mentioned herein
may be the trademarks of their respective owners.
Copyright © Inmarsat Global Limited 2010.
notices
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
61
The user is advised to erase personal data before
disposing of the phone. Deleting data from the phone
memory does not ensure that it cannot be recovered.
Accordingly, Inmarsat does not warrant against
recovery of information.
protection of personal information
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
click to navigate
62
a
accessories 56
admin code 45
alarm
cancelling 34
setting 34
silencing 34
any key answer 19
b
barring calls 20
battery
care 50
charging 11
inserting 10
low power alert 11
removing 10
bluetooth
connecting 42
lock 43
security 42
business card 34
c
calculator 35
calendar 35
index
call waiting
setting 20
using 16
caller ID
sending 20
calls
additional features 18
advanced features 20
barring 20
conference 16
declining 15
delete call logs 19
dialling 14
diverting 21
emergency 17
from contacts 14
from received message 26
handsfree 17
length 18
mute a call 17
receiving a call 15
receiving a second call 16
returning 15
summary 19
volume control 17
while on another call 15
car charger 11
CD 9
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
62 abc
63 c d e f g
64 g h i k l m
65 m n o p q r
66 s t u v w
click to navigate
63
charger
car 11
mains 11
solar 11
USB 11
closed user group
operating 43
code
admin 45
PUK 46
PUK 2 46
SIM PIN 46
SIM PIN 2 46
user 45
conference calling 16
contact
calling a contact 32
creating 31
deleting 32
deleting all 32
duplicating 32
editing 31
emailing 32
finding 31
opening 31
ordering by first or last name 31
sending and receiving 33
synchronising with Outlook 33
synchronising with Outlook Express 33
texting 32
copy SIM contacts to phonebook 33
coverage map 8
CUG 43
d
data 36
date and time
setting 40
daylight saving time (DST) 40
disclaimers 55
display
customising settings 41
diverting
calls 21
e
export controls 57
f
firmware version 12
fixed number dialling
activating 22
de-activating 22
using 22
g
general profile 37
GPS
displaying in imperial 29
displaying in metric 29
fix 13
national policies 29
obtaining a manual fix 29
satellites 12
sending your location 29
viewing your location 29
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
62 a b c
63 cdefg
64 g h i k l m
65 m n o p q r
66 s t u v w
click to navigate
64
groups
add 27
assign ringtone 27
belongs to 27
members 27
remove 27
sending texts to 27
view 27
h
handsfree calling 17
i
IMEI number 12
IMSI number 12
info
using 12
important information 12
IsatPhone
caring for 50
k
keypad
changing 39
light 41
locking 41
volume 37
l
language
phone 39
writing 39
local time zone setting 40
lock
bluetooth 43
keypad 41
phone 41
loud profile 37
loudspeaker 17
m
mains charger 11
map
satellite coverage 8
members
groups 27
message service centre number 28
messages
concatenation 28
create new 24
create text for sending to email 25
delete 27
expiry period 28
forward 26
groups 27
receive 25
reply 26
service centre number 28
setting 28
validity 28
viewing received messages 26
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
62 a b c
63 c d e f g
64 ghiklm
65 m n o p q r
66 s t u v w
click to navigate
65
Microsoft Outlook 9
Microsoft Outlook Express 9
minute counter 18
model 12
my phone number 34
n
number
re-dial 15
service provider 34
your phone number 34
o
organiser
browsing 35
creating an entry 35
personalising 35
p
pass code
call barring 20
personalising settings 37
phone
language 12
lock 41
off 12
on 12
upgrade 12
phone language
setting 39
phonebook
managing contacts 31
predictive text
setting 39
prepay
balance enquiry 30
voucher redemption 30
prepay services 30
profiles
general 37
loud 37
silent 37
vibrate only 37
PUK code 46
PUK 2 code 46
q
quick start guide 9
r
received messages
save details 26
save message 27
re-dial
auto 15
remote time zone setting 40
reset all settings 43
ring mode
alert 37
ringtones
assign to groups 27
unique 38
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
62 a b c
63 c d e f g
64 g h i k l m
65 mnopqr
66 s t u v w
click to navigate
66
s
satellite
connecting to 13
screen
brightness 41
light 41
lighting 41
standby 41
security
admin code 45
network-controlled 46
phone-controlled 45
SIM card-controlled 46
SIM PIN code 46
SIM PIN 2 code 46
user code 45
service provider 34
silent profile 37
SIM card
contact management 33
inserting 9
subscription 9
SIM contacts
copying 33
SIM PIN code 46
SIM PIN 2 code 46
solar charger 11
sounds
ringtones 37
speed dialling
removing 19
setting up 19
using 19
t
texts
entering 23
message alert 37
predictive text 23
selecting standard or predictive mode 24
sending to group 27
standard text 24
time
daylight saving (DST) 40
time and date
setting 40
time zone
local 40
remote 40
setting 40
troubleshooting 47
u
user code 45
v
vibrate-only profile 37
voicemail 18
w
world time 40
wrist strap 11
writing language 39
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
62 a b c
63 c d e f g
64 g h i k l m
65 m n o p q r
66 stuvw
click to navigate
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index
67
inmarsat.com/isatphone
While the information in this User Guide has been prepared in good faith, no representation or warranty, express or implied, is made
or given as to the adequacy, accuracy, reliability or completeness of such information. Inmarsat Global Limited nor any group company
or their respective officers, employees or agents shall have any responsibility or liability to any person resulting from the use of the
information in this User Guide. Copyright © Inmarsat Global Limited 2010. All rights reserved. INMARSAT is a registered trademark of
the International Mobile Satellite Organisation; the Inmarsat LOGO is a registered trademark of Inmarsat (IP) Company Limited. Both
trademarks are licensed to Inmarsat Global Limited. IsatPhone Pro UG June 2010.