InnoSenT IPM165 K-Band Transceiver User Manual

InnoSenT GmbH K-Band Transceiver

USER MANUAL

and manufactured in GermanydesignedInnovation in Radar TechnologyUSER MANUALCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 1 USER MANUAL IPM-165_F Version 8.3 PRODUCT FAMILYAPPLICATIONSFEATURES:DESCRIPTIONADDITIONAL INFORMATIONInnoSenT Standard Product. Changes will not be notified as long as there is no influence on form, fit and within this datasheet specified function of the product. RoHS-INFOThis product is compliant to the restriction of hazardous substances (RoHS - European Union directive 2011/65/EU).CERTIFICATESInnoSenT GmbH has established and applies a quality system for: development, production and sales of radar sensors for industrial and automotive sensors.VersionThe IPM-165 is a 24GHz Doppler module with an asymmetrical wide beam for detection of moving objects. Low power consumption components are quickly enabled supporting duty cycles for battery or solar panel operation. Certified and approved according to • ETSI EN 300 440• FCC part 15.2458.3 - 24.10.2013 IPM-165_FLow Cost K-Band Transceiver• Security applications• Door openers• Industrial applicationsMovement Velocity Direction Presence Distance Angle »radar-based motion detector working in the 24GHz - ISM - Band »available in different frequency ranges for worldwide use »advanced LCO-oscillator with low current consumption »split transmit and receive path for maximum gain »very compact outline dimensions
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 2 USER MANUAL IPM-165_F Version 8.3 PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITSOscillatortransmit frequency1US-frequency band@ 25°C fF24.075 24.175 GHzoutput power Pout 16 dBmtemperature drift Δf -1 MHz/°CReceiverIF-output voltage offset -300 300 mVSignal level2category A 563 855 mVP-Pcategory B 856 117 7 mVP-Pcategory C 117 8 1819 mVP-PNoise level2R116 mVAntenna Patternfull beam width @ -3dB azimuth horizontal 80 °elevation vertical 35 °side-lobe suppression azimuth horizontal 12 dBelevation vertical 13 dBAntenna gain 9.5 dBiPower supplysupply voltage VCC 4.75 5.00 5.25 Vsupply current ICC 30 40 mAEnvironmentoperating temperature TOP -20 +60 °Cstorage temperature Tstorage -20 +60 °CMechanical Outlinesoutline dimensionsheightlengthwidth25257 (12.7)mm1 Details to the frequency bands you can find in Annex A2 Relative output signal level and noise is measured at room temperature in a dedicated InnoSenT test setupELECTRICAL CHARACTERISTICSESD InfoThis InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard.
Innovation in Radar TechnologyCONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Page 3 USER MANUAL IPM-165_F Version 8.3 PIN # DESCRIPTION IN / OUT COMMENT1 VCC input supply voltage (4.75 - 5.25V)2 IF1 output signal I(nphase)3 GND input analog groundINTERFACEThe sensor provides a 2.54mm grid, single row pin header (square pin 0.635mm)MECHANICAL OUTLINESPIN 110.501.251.906.60 +1.00- 0.2025.00 + 0.20 - 0.2025.00 + 0.20 - 0.2020.20 + 0.20 - 0.2020.20 + 0.20 - 0.2012.70PIN 1PIN 19.962.54antennaall dimensions in mmbacksideside viewbottom viewtop viewNOTICE:This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)].Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.NOTICE:Changes or modications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment.Text for User Manual (blue cursive text)For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar state-ment, placed in a prominent location in the text of the manual:NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip-ment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio commu-nications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Innovation in Radar TechnologyPage 4 USER MANUAL IPM-165_F Version 8.3 InnoSenT GmbHAm Rödertor 3097499 DonnersdorfGERMANYTel.:E-Mail:URL:+49 (0) 9528 - 9518 - 0info@innosent.dewww.innosent.deFCC approvalChanges or modifications made to the equipment not expressly approved by InnoSenT GmbH may void the FCC / IC authorization to operate this equipment.The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below:•OEMIntegratormustensurethattheendusermanualmaynotcontainanyinformationaboutthewaytoinstall or remove the module from the final product.•Dependingonthenalhostdeviceadditionalauthorizationrequirementsforthenon-transmitterfunctionsof the transmitter module may be required (i.e., Verification, or Declaration of Conformity) The OEM integ-rator is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements.•Theinformationonthelabelandintheusermanualisrequiredtobeincorporatedintheusermanualofthe final host. see 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES)•Additionallabelwiththewords‘ContainsFCCID:UXS-IPM165’and‘ContainsIC:6902A-IPM165’shallbeapplied and visible from the outside of the host product.•Themodulemustbeinstalledandusedinstrictaccordancewiththemanufacturer’sinstructionsasde-scribed in the user documentation that comes with the module.•Theendusermanualforthenalhostproductoperatingwiththistransmittermustincludeoperatinginstructions to satisfy RF exposure compliance requirements.e.gRadiofrequency radiation exposure Information:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.•Theantennaofthemodulemaynotberemoved,replacednormodied.Theantennamustnotbeco-loca-ted or operating in conjunction with any other antenna or transmitter. No additional antenna must be used.•Whenthenalhostproductoperatingwiththistransmitterdeviatefromabove,installationofthismoduleinto specific final hosts may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

Navigation menu