InnoSenT IPM165US K-Band Transceiver User Manual IPM 165 US
InnoSenT GmbH K-Band Transceiver IPM 165 US
InnoSenT >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 789481 |
| Application ID | byHoIsuCnZuRhe1Iy2pvMg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 24.57kB (307147 bits) |
| Date Submitted | 2007-05-08 00:00:00 |
| Date Available | 2007-05-08 00:00:00 |
| Creation Date | 2007-07-03 07:54:34 |
| Producing Software | GNU Ghostscript 7.06 |
| Document Lastmod | 2007-07-03 07:54:34 |
| Document Title | User Manual IPM-165_US |
| Document Creator | PDFCreator Version 0.8.0 |
| Document Author: | Baeuerlein_Stefan |
User Manual Product Family: K-Band Transceivers K-Band Transceiver with two integrated patch antennas IPM-165_US Description: radar-based motion detector centered @ 24.125 GHz advanced PHEMT-oscillator with low current consumption mono (single channel) operation very small outline dimensions Handling Precautions: This InnoSenT Sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard. Absolute Maximum Ratings: Parameter supply voltage operating temperature (out of spec) storage temperature Symbol VCC TOP TSTG Rating 5.25 - 40 / + 85 + 90 Units °C °C Electrical Characteristics: Parameter transmit frequency output power (EIRP) temperature drift antenna pattern Tx (3dB) side lobe suppression IF output supply voltage supply current operating temperature outline dimensions Symbol ftransmit Pout ∆f horizontal vertical horizontal vertical voltage offset VCC ICC TOP min. 24.075 -300 4.75 typ. 24.125 16 -1 80 32 13 13 5.0 30 - 20 ~ 25 x 25 x 7 max. 24.175 300 5.25 40 + 60 units GHz dBm MHz/°C ° ° dB dB mV mA °C mm comment azimuth elevation azimuth elevation Interface: The sensor provides a 2.54mm grid, single row pin header (square pin 0.635mm) Pin # Version 1.0 2007-02-22 Description VCC IF1 GND In/Out input output input Comment supply voltage (+5 V) signal output analog ground IPM-165_US page 1 of 3 Mechanical Outlines: (all dimensions in mm) Approved pulsing conditions to fulfill the FCC requieremts: • ASK modulation with 10kHz and 10% dutycycle (on-time 10µs min.) • Warning: Any other pulsing condition with less than 10µs on-time may void the FCC authorization to operate this equipment. Certification and environment protection: InnoSenT GmbH has established and applies a quality system for: Development, production and sales of radar sensors for commercial and industrial sensors An audit was performed, Report No. 010350 Proof has been furnished that the requirements according to DIN EN ISO 9001:2000 are fulfilled. This InnoSenT product is compliant to the restriction of hazardous substances (RoHs – European Union directive 2002/95/EG). FCC approval • This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorization to operate this equipment. • Manufacturers of mobile or fixed devices incorporating IPM-165 modules are authorized to use the FCC Grants and IC Certificates of the IPM-165 modules for their own final products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating "Contains FCC ID: UXS-IPM165" and "Contains IC: 6902AIPM165". Version 1.0 2007-02-22 IPM-165_US page 2 of 3 Contact Information: InnoSenT GmbH Am Roedertor 30 97499 Donnersdorf Germany Version 1.0 2007-02-22 Phone: +49 (0) 9528-9518-0 Fax: +49 (0) 9528-9518-99 IPM-165_US E-Mail: info@InnoSenT.de Web: www.InnoSenT.de page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : GNU Ghostscript 7.06 Title : User Manual IPM-165_US Creator : PDFCreator Version 0.8.0 Create Date : 2007:07:03 07:54:34 Author : Baeuerlein_Stefan Modify Date : 2007:07:03 07:54:34 Subject :EXIF Metadata provided by EXIF.tools