InnoSenT IPQ05 Stereo K-Band Transceiver Module User Manual IPQ 05
InnoSenT GmbH Stereo K-Band Transceiver Module IPQ 05
InnoSenT >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 750593 |
| Application ID | hbs4AlK4vnJZSyjnWCuBCg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 15.78kB (197229 bits) |
| Date Submitted | 2007-01-25 00:00:00 |
| Date Available | 2007-01-25 00:00:00 |
| Creation Date | 2007-01-24 11:41:53 |
| Producing Software | GNU Ghostscript 7.06 |
| Document Lastmod | 2007-01-24 11:41:53 |
| Document Title | User Manual IPQ-05 |
| Document Creator | PDFCreator Version 0.8.0 |
| Document Author: | Baeuerlein_Stefan |
User Manual Product Family: K-Band Transceivers Stereo K-Band Transceiver with two integrated patch antennas, IF-pre-amplifier and two electronic selectable antenna patterns IPQ-05 Description: radar-based motion detector centered @ 24.125 GHz advanced PHEMT-oscillator with low current consumption split transmit and receive path for maximum gain stereo (dual channel) operation for direction of motion identification integrated IF-pre-amplifier enable input for oscillator shut down small outline dimensions two electronic selectable antenna patterns Absolute Maximum Ratings: Parameter supply voltage operating temperature (out of spec) storage temperature Symbol VCC TOP TSTG Rating 5.25 - 40 / + 85 + 90 Units °C °C Electrical Characteristics: Parameter transmit frequency output power (EIRP) temperature drift antenna pattern Tx (3dB) antenna pattern Tx (10dB) side lobe suppression Tx antenna pattern Rx1 (3dB) antenna pattern Rx1 (10dB) side lobe suppression Rx1 antenna pattern Rx2 (3dB) antenna pattern Rx2 (10dB) side lobe suppression Rx Version 1.0 2007-01-24 Symbol ftransmit f@room temperature Pout ∆f horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical min. 24.075 24.105 typ. 24.125 15 -1 53 33 130 60 53 33 130 60 47 33 85 64 IPQ-05 max. 24.175 24.145 20 13 13 13 13 13 13 units GHz GHz dBm MHz/°C ° ° ° ° dB dB ° ° ° ° dB dB ° ° ° ° dB dB comment azimuth elevation azimuth elevation azimuth elevation azimuth elevation azimuth elevation azimuth elevation azimuth elevation azimuth elevation azimuth elevation page 1 of 3 Electrical Characteristics (cont’d): Parameter I/Q balance Symbol amplitude phase voltage offset gain IF output IF-amplifier switching voltage supply voltage supply current operating temperature outline dimensions min. typ. 60 1.0 19 90 2.2 20 bandwidth DC high level low level VCC ICC TOP GND 4.75 max. 120 4.0 21 units dB ° dB kHz 5.0 35 - 20 ~ 40 x 25 x 24 5.5 0.5 5.25 50 + 60 mA °C mm comment upper frequency limited by operational amplifier narrow antenna pattern broad antenna pattern Interface: Pin # Description enable VCC GND IF1 IF2 not connected In/Out input input input output output Comment active low supply voltage (+5 V) analog ground Signal I(nphase) Signal Q(uadrature) mates with: Molex P/N 53014, 53015 and 53025 I/Q Channel: Signal Q is leading if an object moves towards the radar transceiver. Version 1.0 2007-01-24 IPQ-05 page 2 of 3 Certification and environment protection: InnoSenT GmbH has established and applies a quality system for: Development, production and sales of radar sensors for commercial and industrial sensors An audit was performed, Report No. 010350 Proof has been furnished that the requirements according to DIN EN ISO 9001:2000 are fulfilled. This InnoSenT product is compliant to the restriction of hazardous substances (RoHs – European Union directive 2002/95/EG). FCC approval • This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorization to operate this equipment. • Manufacturers of mobile or fixed devices incorporating IPQ-05 modules are authorized to use the FCC Grants and IC Certificates of the IPQ-05 modules for their own final products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating "Contains FCC ID: UXS-IPQ05" and "Contains IC: 6902AIPQ05". Contact Information: InnoSenT GmbH Am Roedertor 30 97499 Donnersdorf Germany Version 1.0 2007-01-24 Phone: +49 (0) 9528-9518-0 Fax: +49 (0) 9528-9518-99 IPQ-05 E-Mail: info@InnoSenT.de Web: www.InnoSenT.de page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : GNU Ghostscript 7.06 Title : User Manual IPQ-05 Creator : PDFCreator Version 0.8.0 Create Date : 2007:01:24 11:41:53 Author : Baeuerlein_Stefan Modify Date : 2007:01:24 11:41:53 Subject :EXIF Metadata provided by EXIF.tools